Technical Specifications
7
© 2013 Fiat Products
Customer Service Canada
1-800-387-0369
www.fiat.ca
Customer Service United States
1-800-442-1902
www.fiatproducts.com
FIAT
PRODUCTS
®
Revised 8/13
TERRAZZO SHOWER FLOOR
MONTEREY
®
TERRAZZO SHOWER FLOOR
MONTEREY
• Monterey shower oors are designed for
installations where tile walls and glass
enclosures are used.
• Precast terrazzo one piece products are made of
black and white marble chips cast in white portland
cement to produce a compressive strength of not
less than 3000 P.S.I., seven days after casting.
• The terrazzo surface is ground and polished
with all air holes and/or pits grouted and the
excess removed. Shower oors are available
in custom sizes.
• Flange, cast integral, shall be of galvanized-
bonderized steel and shall extend not less than
1" (25mm) high and not less than 1¼" (32mm)
wide.
• The drain body in shower oors are made of
stainless steel cast integrally and provide for a
caulked lead connection not less than 1" (25mm)
deep to a 2" (51mm) pipe. Removable type
stainless steel strainer plate.
Installations:
• Establish ¼" (6mm) clearance between shower
oor and building wall. It is required that the entire
area between the shower oor and the building
oor has a ½" (13mm) layer of mortar in order that
the shower oor is level.
• Optional stainless steel tiling anges available.
IMPORTANT: Rough-in dimensions may vary 1/2" and are subject to
change or cancellation without prior notice.
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
SECTION THRU
THRESHOLD
SECTION THRU
DRAIN
SECTION THRU
SIDES
1/4" PITCH (6mm)
LEAD CAULK
BY OTHERS
2-11/16"
(68mm)
4"
(102mm)
2" (51mm) 2" (51mm)
1" (25mm)
1-1/2" (38mm)
REMOVABLE
STAINLESS STEEL
STRAINER PLATE
4"
(102mm)
3"
(76mm)
NOTE: Drawing not to scale.