Technical Specifications

Superior Quality Shower Receptors
Molded Stone
Cascade™ Shower Receptors
Cascade shower floor shall be the type as
manufactured by Fiat Products. Molding shall be
done in matched metal dies, resulting in a one
piece homogenous product. A permanent slip
resistant surface shall also be integrally molded so
that it will neither trap nor impede the flow of water.
The shoulder shall be note less than 3
1
⁄16” high or
less than 1
1
⁄2” wide. The tilting flange shall extend
not less than 1
1
⁄2” above the shoulder and shall be
not less than 1” higher than the threshold providing
an integrally molded water barrier. The threshold
shall be not less than 4
3
⁄4” high (see following table).
• Available in single and double threshhold and
neo-corner
• One-piece with 1
1
⁄2” water retention tiling flange
• Durable molded stone construction
• Slip resistant surface
• Integral molded drain with plastic strainer
• Each receptor comes with a protective coating
• Matching Estate
™
shower wall surrounds, C9960/U9960
(32”x 32”); C9970/U9970 (36”x 36”); C9980/U9980
(48”x36”); C9990/U9990 (36”x 36” right angle)
• Meets all requirements of ANSI Z-124.2 Standard
• FHA, IAMPO, BOCA, SBCCI listed
• Illustrated installation instructions included
• Available in White and Bone
• Five-year warranty
FEATURES
NOTES
C
ASCADE
™
RECEPTORS
Model
32WL
34WL
36WL
42WL
4242WL
48WL
4832WL
54WL
60WL
34WLD
36WLC
36WLD
38WLC
Size
32”x32”
34”x34”
36”x36”
42”x34”
42” x 42”
48”x34”
48”x32”
54”x34”
60”x34”
34”x34” Double Threshold
36”x36” Neo-Corner
36”x36” Double Threshold
38”x38” Neo-Corner
CR/PL© 04/03 Printed in U.S.A.
Universal-Rundle
Universal-Rundle