Owner's manual

98
IF AN INTERIOR
LIGHT BURNS
OUT
CEILING LIGHT UNIT
To change 12V-10W tubular bulb A:
pry off the ceiling light unit with a
screwdriver at the points indicated in
fig. 26.
GLOVE COMPARTMENT
LIGHT fig. 27
To replace the tubular 12V-5W bulb:
remove the lens by pressing it on its
two short sides and pulling it down-
wards.
IF A FUSE
BLOWS
GENERAL fig. 28
If an electrical device is not working,
check whether the respective fuse is
blown. The conductor C should not
be broken. If it is, replace it with an-
other with the same amperage (same
colour).
A - Undamaged fuse
B - Fuse with broken filament.
fig. 26
P5S00689m
fig. 27
P5S00704m
fig. 28
P5S00742m