Operation Manual

REPLACING AN
EXTERIOR BULB
For the type of bulb and relevant power
rating, see “Changing a bulb”.
FRONT LIGHT CLUSTERS
The front light clusters contain side
light, daytime running light, dipped,
main beam and direction indicator
bulbs fig. 156.
The bulbs are arranged inside the light
cluster as follows:
A Main beam headlights:
B Dipped headlights;
C Direction indicators and side
lights/daytime running lights
To access the bulbs, remove the
snap-fitted covers.
SIDE LIGHTS/DAYTIME RUNNING
LIGHTS
To replace the bulb, proceed as follows:
❒ remove the protective cover C fig.
156;
❒ turn the bulb holder A fig. 157
anticlockwise and remove it;
❒ extract the bulb and replace it;
❒ refit the new bulb, put the bulb holder
A fig. 157 back into place and then
refit the protective cover C fig. 156
properly.
DIPPED HEADLIGHTS
To replace the bulb, proceed as follows:
❒ remove the protective cover B fig.
156;
❒ disconnect the electrical connector;
❒ release the bulb holder from the
side clips A fig. 158;
❒ extract the bulb and replace it;
❒ fit the new bulb, ensuring that the
outline of the metal part coincides
with the grooves on the curve of the
headlight, pressing to engage it
with the side clips A fig. 158; then
reconnect the electrical connector;
❒ refit the protective cover B fig. 156.
156
F0V0520
157
F0V0521
158
F0V0522
155