Operation Manual

DIRECTION INDICATORS
Front
To replace the bulb, proceed as follows:
❒ remove the protective cover C fig.
156;
❒ turn bulb holder A fig. 159
anticlockwise and remove it;
❒ extract the bulb, pushing it gently
and turning it anticlockwise;
❒ replace the bulb and refit the bulb
holder A fig. 159 by turning it
clockwise and locking it properly into
place;
❒ refit the protective cover C fig. 156.
Side
IMPORTANT Go to a Fiat Dealership to
have bulbs for the side direction
indicators replaced, because they are
located inside the wing mirror.
MAIN BEAM HEADLIGHTS
To replace the bulb, proceed as
follows:
❒ remove the protective cover A fig.
156;
❒ disconnect the electrical connector;
❒ release the bulb holder from the
side clips A fig. 160;
❒ extract the bulb and replace it;
❒ fit the new bulb, ensuring that the
outline of the metal part coincides
with the grooves on the curve of the
headlight, pressing to engage it
with the side clips A fig. 160; then
reconnect the electrical connector;
❒ refit the protective cover A fig. 156.
FOG LIGHTS
(for versions/markets, where provided)
IMPORTANT Go to a Fiat Dealership
to have the front fog light bulbs
replaced.
REAR LIGHT CLUSTERS
The rear light clusters contain the bulbs
for the side lights, direction indicators
and reversing/rear fog and brake lights.
To access the light clusters, proceed
as follows:
❒ open the rear doors;
❒ undo the fixing screws A fig. 161;
❒ disconnect the electrical connector
and then remove the light cluster.
The bulbs are arranged inside the light
cluster fig. 162 as follows:
A Brake lights
B Direction indicators
C Reverse lights
D Side/rear fog lights;
To access the bulbs, undo the 6 fixing
screws E fig. 162 and remove the
bulb holder.
159
F0V0523
160
F0V0524
156
IN AN EMERGENCY