Operation Manual

To change the bulb, push it in gently
and turn it anticlockwise (“bayonet”
type), then remove and replace it.
THIRD BRAKE LIGHTS
To replace the bulb proceed as follows:
❒ for versions with tailgate, undo the
two fixing screws A fig. 163 and
remove the unit;
❒ for versions with wing doors, remove
the rubber caps B fig. 164 and
manoeuvre the holding tabs C, then
remove the unit;
❒ for versions with high roof and swing
doors, remove the pressure-fit plastic
guard A fig. 165 and rubber cap B
fig. 165, using a screwdriver, release
the retaining tags as shown in the
figure and remove the unit;
❒ manoeuvre the appropriate tabs and
remove the bulb holder;
❒ remove the snap-fitted bulb and
replace.
161
F0V0034
162
F0V0525
163
F0V0163
164
F0V0164
165
F0V0231
157