Operation Manual

PROLONGED
VEHICLE INACTIVITY
If the vehicle needs to be off the road
for longer than one month, the following
precautions must be taken:
❒ park the vehicle indoors in a dry and,
if possible, well-ventilated place;
❒ engage a gear and check that the
handbrake is not engaged;
❒ disconnect the negative terminal from
the battery pole (see paragraph
“Vehicle inactivity” in the "Dashboard
and controls" chapter) and check
the charge conditions (see paragraph
“Battery” in the “Care and
maintenance” chapter);
❒ clean and protect the painted parts
using protective wax;
❒ clean and protect the shiny metal
parts using special compounds
available commercially;
❒ sprinkle talcum powder on the
windscreen and rear window wiper
rubber blades and lift them off the
glass;
❒ slightly open the windows;
❒ cover the vehicle with a piece of
fabric or perforated plastic sheet. Do
not use compact plastic tarpaulins,
which prevent humidity from
evaporating from the surface of the
vehicle;
❒ inflate tyres to +0.5 bar above the
standard specified pressure and
check it at intervals;
❒ do not drain the engine cooling
system.
BODYWORK
PROTECTION AGAINST
ATMOSPHERIC AGENTS
The main causes of corrosion are the
following:
❒ atmospheric pollution;
❒ salty air and humidity (coastal areas,
or hot humid climates);
❒ seasonal environmental conditions.
The abrasive action of wind-borne
atmospheric dust and sand, as well as
mud and gravel raised by other cars
is also not to be underestimated.
On your vehicle, Fiat has implemented
the best manufacturing technologies
to effectively protect the bodywork
against corrosion.
These include:
❒ painting products and systems which
give the vehicle particular resistance
to corrosion and abrasion;
❒ use of galvanised (or pretreated)
sheet metal, with high resistance
to corrosion;
❒ spraying the underbody, engine
compartment, wheelhouse internal
parts and other parts with highly
protective wax products;
206
SERVICING AND MAINTENANCE