Operation Manual

IDENTIFICATION
DATA
It is advisable to take note of the
identification codes. The following
identification codes are printed and
shown on the plates:
❒ VIN plate.
❒ Chassis marking.
❒ Bodywork paint identification plate.
❒ Engine marking.
VIN PLATE
This plate is fitted to the engine
compartment air intake chamber and
bears the following information fig. 225:
B Type-approval number.
C Vehicle type identification code.
D Chassis manufacture number.
E Maximum authorised weight of
vehicle fully laden.
F Maximum authorised weight of
vehicle when fully laden plus trailer.
G Maximum authorised weight on first
axle (front).
H Maximum authorised weight on
second axle (rear).
I Engine type.
L Bodywork version code.
M Spare part number.
N Correct fume coefficient value.
BODYWORK PAINT
IDENTIFICATION PLATE
This plate is fitted inside the bonnet and
contains the following information fig.
226:
A Paint manufacturer.
B Colour name.
C Fiat colour code.
D Colour code for touch-ups or
repainting.
CHASSIS MARKING
These are located respectively:
❒ on the passenger compartment floor
panel, near the right front seat; open
flap A to access fig. 227
❒ on the lower part of the windscreen B
fig. 228
The marking includes:
❒ type of vehicle;
225
F0V0115
226
F0V0118
227
F0V0116
212
TECHNICAL SPECIFICATIONS
❒ chassis number.