Operation Manual

EXTENDING THE BOOT
Proceed as follows:
❒ open the rear doors and remove the
parcel shelf (as described previously);
❒ completely lower the rear seat head
restraints;
❒ move the seat belt to the side,
making sure that it is fully extended
and not twisted;
❒ lift backrest retainer lever A fig. 86
and fold the backrest forwards to
give you a flat loading area. When
you lift the lever, you will see a red
band.
❒ to widen the load compartment
further, lift lever B fig. 87 on the side
of the cushion that will raise
automatically; intervene manually to
fold seat and backrest completely
forward fig. 88.
On versions with backrest folded down
and parcel shelf folded down (for
versions/markets, where provided) a
load compartment can be created fig.
89.
In the low position, the parcel shelf can
support a maximum load of 70 kg on
a minimum bearing surface of 400 mm
× 400 mm fig. 90.
N.B. There are bands on the rear seats
under the cushion to attach the folded
seat to the front seat head restraint
rods.
SECURING YOUR LOAD
To make it easier to secure your load,
there are hooks (in various quantities
depending on the trim) fixed to the floor
fig. 91 - fig. 92.
84
F0V0136
85
F0V0137
86
F0V0127
87
F0V0202
88
F0V0203
60
KNOW YOUR VEHICLE