Operation Manual

- press the MENU button briefly to
return to the menu screen or hold the
button down to return to the standard
screen without storing.
To cancel the setting, proceed as
follows:
- briefly the press MENU
button;
(On) will flash on the display;
- press the
button; (Off) will flash on
the display;
- press the MENU
button briefly to
return to the menu screen or hold the
button down to return to the standard
screen without storing.
Setting the clock (Hour)
With this function, it is possible to set
the time.
To adjust, proceed as follows:
- briefly press the MENU
button;
the “hours” will flash on the display;
- press the
or button to adjust;
- briefly press the MENU ESC
button; the “minutes” will flash on
the display;
- press the
or button to adjust;
- press the MENU
button briefly to
return to the menu screen or hold the
button down to return to the standard
screen without storing.
Setting the distance unit
(Unit)
With this function it is possible to set
the unit.
To adjust, proceed as follows:
- press the MENU
button briefly:
the display will show the wording (Unit)
and the previously set unit (km) or (mi);
- press
or to select the required
unit.
- press the MENU
button briefly to
return to the menu screen or hold the
button down to return to the standard
screen without storing.
Adjusting the buzzer
volume (bUZZ)
This function is used to adjust the
volume of the audible signal (buzzer)
that sounds in the event of failure/
warning indications and when
the MENU ESC,
and buttons are
pressed.
To set the desired volume, proceed as
follows:
- press the MENU
button briefly:
the display will show the wording
(bUZZ);
- press
or to select the required
volume (adjustable over 8 levels).
- press the MENU
button briefly to
return to the menu screen or hold the
button down to return to the standard
screen without storing.
Activation/Deactivation
of passenger side front
and chest/head side
protection (side bags)
airbags (BAG P)
(for versions/markets, where
provided)
This function allows the passenger side
airbag to be activated/deactivated.
Proceed as follows:
- press the MENU
button and,
after the message BAG P OFF (to
deactivate) or BAG P On (to activate) is
displayed by pressing buttons
or
, press MENU again;
- a confirmation message will appear
on the display;
- press the
or buttons to select
(YES) (confirming activation/
deactivation) or (no) (to abort);
- press the MENU
button briefly: a
message confirming the selection will
be displayed and you will return to
the menu screen or, pressing the button
for longer, you will return to the
standard screen without saving.
77