Operation Manual
Daytime running lights
(DRL)
This function allows you to activate/
deactivate the daytime running lights.
Proceed as follows to activate or
deactivate this function:
- press the MENU
button briefly:
the display will show the wording DRL;
- press the
or button to activate
(On) or deactivate (Off) the daytime
running lights;
- press the MENU
button briefly to
return to the submenu screen or hold
the button down to return to the main
menu screen without saving;
MULTIFUNCTION
DISPLAY
(for versions/markets, where provided)
The vehicle may be equipped with a
multifunction display that gives the
driver useful information depending on
the previous settings.
STANDARD SCREEN
The standard screen fig. 119 can
display the following information:
A
Date
B
Milometer (distance covered in km or
miles).
C
Time (always displayed, even with the
key extracted and the front doors
closed).
D
Outside temperature.
E
Headlamp alignment position (only
with dipped headlamps on).
F
Start&Stop function indication (for
versions/markets, where provided).
G
Gear Shift Indication (for versions/
markets, where provided).
Note When one of the front doors is
opened, the display is activated,
showing the time and mileage for a few
seconds.
CONTROL BUTTONS
To scroll up through the screen and
the related options or to increase
the displayed value.
MENU
Press briefly to access the menu and/or
go to next screen or to confirm the
required menu option. Hold down to go
back to the standard screen.
To scroll down through the screen
and the related options or to
decrease the displayed value.
NOTE Buttons
and activate
different functions according to the
following situations:
119
F0V0532
78
KNOWING THE INSTRUMENT PANEL