Operation Manual
To set the desired language, proceed
as follows:
– briefly press the MENU
button;
the previously set language will flash on
the display;
– press the
or button to select;
– press the MENU
button briefly to
return to the menu screen or hold the
button down to return to the standard
screen without storing.
Warnings volume
(Adjusting the
failure/warning acoustic
signal volume)
With this function the volume of the
acoustic signal which accompanies the
display of failure/warning can be
adjusted according to 8 levels.
To set the desired volume, proceed as
follows:
– briefly press the MENU
button;
the previously set volume level will flash
on the display;
– press the
or button to make the
adjustment;
– press the MENU
button briefly to
return to the menu screen or hold the
button down to return to the standard
screen without storing.
Button volume
(Adjusting the button
volume)
This function may be used to adjust (to
8 levels) the volume of the noise made
when the MENU
, or buttons
are pressed.
To set the desired volume, proceed as
follows:
– briefly press the MENU
button;
the previously set volume level will flash
on the display;
– press the
or button to make the
adjustment;
– press the MENU
button briefly to
return to the menu screen or hold the
button down to return to the standard
screen without storing.
Belt buzzer (Buzzer
activation for SBR
indication)
This function can be displayed only
after a Fiat Dealership has deactivated
the SBR system (see “SBR system”
in the “Safety” section).
Service (Scheduled
servicing)
Using this function you can display
information about the mileage intervals
for vehicle servicing.
To consult the information, proceed as
follows:
– briefly press the MENU
button,
which makes the display show the
service interval in km or mi according to
the previous setting (see "Distance
units of measurement" paragraph);
– briefly press the MENU
button to
go back to the menu screen or hold
the button down to go back to the
standard screen.
83