F I A T F R E E M O N ENGLISH The data contained in this publication is intended merely as a guide. FIAT reserves the right to modify the models and versions described in this booklet at any time for technical and commercial reasons. If you have any further questions please consult your FIAT dealer. Printed in recycled paper without chlorine.
WHY CHOOSE GENUINE PARTS As we have conceived, designed and built your vehicle, we really know every little detail and component inside out. At our authorized dealerships, you will find technicians personally trained by us who can offer you quality and professional service for all types of servicing and maintenance. They are always on hand for periodic maintenance, seasonal services and for practical expert advice.
HOW TO RECOGNISE GENUINE PARTS All our Genuine Parts undergo rigorous testing, both in design and build stages, by specialists who check the use of cutting-edge materials and test their reliability. This guarantees performance and safety in the long term for both you and the passengers in your automobile. Always insist on a Genuine Part and check that it has been used.
Dear Customer, Thank you for choosing Fiat and congratulations on your choice of a Fiat Freemont. We have written this handbook to help you get to know all your car and use it in the best possible way. You should read it right through before taking to the road for the first time. You will find information, tips and important warnings regarding the driving of your car to help you get the most from the technological features of your Fiat.
KNOWING YOUR VEHICLE INTRODUCTION Congratulations on selecting your new FIAT vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. Before you start to drive this vehicle, read this Owner's Manual and all the supplements. Be sure you are familiar with all vehicle controls, particularly those used for braking, steering, and transmission shifting. Learn how your vehicle handles on different road surfaces.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IMPORTANT NOTICE ALL MATERIAL CONTAINED IN THIS PUBLICATION IS BASED ON THE LATEST INFORMATION AVAILABLE AT TIME OF PUBLICATION APPROVAL. THE RIGHT IS RESERVED TO PUBLISH REVISIONS AT ANY TIME. This Owner's Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle.
Your warranties do not cover any part that the manufacturer did not supply. Nor do they cover the cost of any repairs or adjustments that might be caused or needed because of the installation or use of nonmanufacturer parts, components, equipment, materials, or additives. Nor do your warranties cover the costs of repairing damage or conditions caused by any changes to your vehicle that do not comply with the manufacturers specifications.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING HOW TO USE THIS MANUAL Consult the Table of Contents to determine which section contains the information you desire. Since the specification of your vehicle depends on the items of equipment ordered, certain descriptions and illustrations may differ from your vehicle's equipment. The detailed index at the back of this Owner's Manual contains a complete listing of all subjects.
VEHICLE MODIFICATIONS/ ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a accident resulting in serious injury or death.
KNOWING YOUR VEHICLE INSTRUMENT PANEL FEATURES (fig. 2) SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS (fig.
INSTRUMENTS (fig. 3) 1. Tachometer This gauge measures engine revolutions per minute (RPM x 1000). Before the pointer reaches the red area, ease up on the accelerator to prevent engine damage. 2. Speedometer Shows the vehicle speed. 3. Fuel Gauge The fuel gauge shows the level of fuel in the tank when ignition switch is in the ON/RUN position. 4. Coolant Temperature Gauge The temperature gauge indicates engine coolant temperature.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 8 The gauge pointer will likely indicate a high temperature when driving in hot weather, up mountain grades, in heavy traffic, or when towing a trailer. If the pointer rises to the “H” mark, safely pull over and stop the vehicle. If the Air Conditioning A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the vehicle.
KEY FOB The Key Fob also contains the Remote Keyless Entry (RKE) transmitter and an emergency key, which stores in the rear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the Key Fob go dead. The emergency key is also for locking the glove box. You can keep the emergency key with you when valet parking.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 10 WARNING! • Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, and remove the key fob from the ignition. When leaving the vehicle, always lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle.
The Sentry Key® Immobilizer system is not compatible with some after-market remote starting systems. Use of these systems may result in vehicle starting problems and loss of security protection. NOTE: When having the Sentry Key® Immobilizer system serviced, bring all vehicle Key Fobs with you to the authorized dealer. All of the Key Fobs provided with your new vehicle have been programmed to the vehicle electronics.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY REMOTE KEYLESS ENTRY (RKE) The RKE system allows you to lock or unlock the doors and liftgate from distances up to approximately 10 m using a hand-held Key Fob with RKE transmitter. The RKE transmitter does not need to be pointed at the vehicle to activate the system. NOTE: Driving at speeds 8 km/h and above disables the system from responding to all RKE transmitter buttons for all RKE transmitters. (fig.
If the vehicle is equipped with Passive Entry, refer to “Keyless Enter-N-Go — If Equipped” under “Knowing Your Vehicle” for further information. REMOTE OPEN WINDOW FEATURE This feature allows you to remotely lower both front door windows at the same time. To use this feature, press and release the UNLOCK button on the RKE transmitter and then immediately press and hold the UNLOCK button until the windows lower to the level desired or until they lower completely.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 14 GENERAL INFORMATION Transmitter and receivers operate on a carrier frequency of 434 MHz as required by EEC regulations. These devices must be certified to conform to specific regulations in each individual country.
• Press LOCK on the interior power door lock switch with the driver and/or passenger door open. • Press the LOCK button on the exterior Passive Entry Door Handle with a valid Key Fob available in the same exterior zone (refer to "Keyless Enter-N-Go" in "Knowing Your Vehicle" for further information). • Press the LOCK button on the Remote Keyless Entry (RKE) transmitter. 3. If any doors are open, close them.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS PREMIUM SECURITY SYSTEM — IF EQUIPPED The Premium Security system monitors the doors, hood latch, and liftgate for unauthorized entry and the ignition switch for unauthorized operation. The system also includes a dual function intrusion sensor and vehicle tilt sensor. The intrusion sensor monitors the vehicle interior for motion.
• For vehicles equipped with Keyless Enter-N-Go, press the Keyless Enter-N-Go Start/Stop button (requires at least one valid Key Fob in the vehicle). • For vehicles not equipped with Keyless Enter-NGo, insert a valid key into the ignition switch and turn the key to the ON position. NOTE: • The driver's door key cylinder and the liftgate button on the RKE transmitter cannot arm or disarm the Vehicle Security Alarm.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) • Warning Message Displays • Turn Menu OFF The Electronic Vehicle Information Center (EVIC) features a driver-interactive display that is located in the instrument cluster. (fig. 8) The system allows the driver to select information by pressing the following buttons mounted on the steering wheel: (fig.
SELECT Button Press and release the SELECT button for access to main menus or sub-menus. Press and hold the SELECT button for two seconds to reset features. BACK Button Press the BACK button to scroll back to a previous menu or sub-menu. ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) DISPLAYS When the appropriate conditions exist, the EVIC displays the following messages: • Turn Signal On (with a continuous warning chime if the vehicle is driven more than 1.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 20 information on Autostick™, refer to “Starting And Driving.” A loose, improperly installed, or damaged fuel filler cap may also turn on the Malfunction Indicator Light (MIL). • Electronic Speed Control ON This light will turn on when the electronic speed control is ON. For further information, refer to “Electronic Speed Control” in “Knowing Your Vehicle.
the charging system light remains on, it means that the vehicle is experiencing a problem with the charging system. Obtain SERVICE IMMEDIATELY. See an authorized dealer. If jump starting is required, refer to “Jump Starting Procedures” in “In An Emergency”. • Electronic Throttle Control (ETC) Light This light informs you of a problem with the Electronic Throttle Control (ETC) system. The light will come on when the ignition is first turned ON and remain on briefly as a bulb check.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 22 WARNING! If theTransmissionTemperatureWarning Light is illuminated and you continue operating the vehicle, in some circumstances you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire. OIL CHANGE REQUIRED Your vehicle is equipped with an engine oil change indicator system.
Distance To Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level. DTE cannot be reset through the SELECT button. VEHICLE SPEED Press and release the UP or DOWN button until “Vehicle Speed” displays highlighted in the EVIC and press the SELECT button.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 24 Trip B Shows the total distance traveled for Trip B since the last reset. Elapsed Time Shows the total elapsed time of travel since the last reset when the ignition is in the ACC position. Elapsed time will increment when the ignition is in the ON/ RUN position. To Reset The Display Reset will only occur while a resettable function is being displayed.
Uconnect TOUCH™ SETTINGS KNOWING YOUR VEHICLE HARD-KEYS Hard-Keys are located on the left and right side of the Uconnect Touch™ 4.3 screen. In addition, there is a Scroll/Enter control knob located on the right side of the Climate Controls in the center of the instrument panel. Turn the control knob to scroll through menus and change settings (i.e., 30, 60, 90), press the center of the control knob one or more times to select or change a setting (i.e., ON, OFF).
Display KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS • Brightness Press the Brightness soft-key to change this display. When in this display you may select display brightness with the headlights on and the headlights off. Adjust the brightness with the + and – setting soft-keys or by selecting any point on the scale in between the + and – soft-keys followed by pressing the arrow back soft-key.
followed by pressing the arrow back soft-key when all selections are complete. • Show Time Status Press the Show Time Status soft-key to change this display. When in this display you may turn on or shut off the digital clock in the status bar. To change the Show Time Status setting press and release the On or Off soft-key followed by pressing the arrow back soft-key. • Sync Time Press the Sync Time soft-key to change this display. When in this display you may automatically have the radio set the time.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 28 Headlights with Wipers soft-key, select On or Off followed by pressing the arrow back soft-key. • Auto High Beams Press the Auto High Beams soft-key to change this display. When this feature is selected, the high beam headlights will deactivate automatically under certain conditions.
NOTE: If the vehicle is equipped with Keyless EnterN-Go (Passive Entry) and the EVIC is programmed to Unlock All Doors 1st Press, all doors will unlock no matter which Passive Entry equipped door handle is grasped. If Driver Door 1st Press is programmed, only the driver’s door will unlock when the driver’s door is grasped. With Passive Entry, if Driver Door 1st Press is programmed touching the handle more than once will only result in the driver’s door opening.
KNOWING YOUR VEHICLE press the 0 seconds, 45 seconds, 5 minutes or 10 minutes soft-key followed by pressing the arrow back soft-key. Compass Settings SAFETY STARTING AND DRIVING • Variance Press the Variance soft-key to change this display. Compass Variance is the difference between Magnetic North and Geographic North. To compensate for the differences the variance should be set for the zone where the vehicle is driven, per the zone map.
• Calibration Press the Calibration key to change this setting. This compass is self-calibrating, which eliminates the need to manually reset the compass. When the vehicle is new, the compass may appear erratic and the EVIC will display CAL until the compass is calibrated. You may also calibrate the compass by pressing the ON soft-key and completing one or more 360–degree turns (in an area free from large metal or metallic objects) until the CAL indicator displayed in the EVIC turns off.
KNOWING YOUR VEHICLE SAFETY NOTE: Only one touchscreen area may be selected at a time. (fig. 14) selecting any point on the scale in between the + and – soft-keys followed by pressing the arrow back soft-key. When making a selection, scroll up or down until the preferred setting is highlighted, then press and release the preferred setting until a check-mark appears next to the setting, showing that setting has been selected.
• Touchscreen Beep When in this display you may turn on or shut off the sound heard when a touch screen button (soft-key) is pressed. To change the Touch Screen Beep setting press and release the On or Off soft-key followed by pressing the arrow back soft-key. • Navigation Turn-By-Turn in Cluster When this feature is selected, the turn-by-turn directions will appear in the display as the vehicle approaches a designated turn within a programmed route.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 34 • Parkview Backup Camera Your vehicle may be equipped with the ParkView® Rear Back Up Camera that allows you to see an on-screen image of the rear surroundings of your vehicle whenever the shift lever is put into REVERSE.
• Headlight Dip (Traffic Changeover) Low beam headlights have more control of upward light and direct most of their light downward and either to the right for right hand drive countries or to the left for left hand drive countries to provide safe forward visibility without excessive glare. • Flash Headlights With Lock When this feature is selected, the front and rear turn signals will flash when the doors are locked or unlocked with the RKE transmitter.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 36 Engine Off Options Compass Settings • Easy Exit Seat This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. To make your selection, press the Easy Exit Seats soft-key, select On or Off followed by pressing the arrow back soft-key.
• Perform Compass Calibration Press the Calibration key to change this setting. This compass is self-calibrating, which eliminates the need to manually reset the compass. When the vehicle is new, the compass may appear erratic and the EVIC will display CAL until the compass is calibrated. You may also calibrate the compass by pressing the ON soft-key and completing one or more 360–degree turns (in an area free from large metal or metallic objects) until the CAL indicator displayed in the EVIC turns off.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 38 NOTE: Bass/mid/treble allow the you to simply slide your finger up/down to change the setting as well as press directly on the desired setting. • Speed Adjusted Volume Decreases volume relative to vehicle speed. To change the Speed Adjusted Volume press the Off, 1, 2 or 3 soft-key followed by pressing the arrow back soft-key.
Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the seat switch; the seat will move in the direction of the switch. Release the switch when the desired position is reached. Tilting The Seat Up Or Down The angle of the seat cushion can be adjusted in four directions. Pull upward or push downward on the front or rear of the seat switch; the front or rear of the seat cushion will move in the direction of the switch.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES POWER LUMBAR — IF EQUIPPED The Power Lumbar switch is located on the outboard side of the driver's seat. Push the switch forward to increase the lumbar support. Push the switch rearward to decrease the lumbar support. Pushing upward or downward on the switch will raise or lower the position of the support. (fig.
Touch the “Driver” or “Passenger” seat softkey once to select HI-level heating. Touch the soft-key a second time to select LO-level heating. Touch the soft-key a third time to shut the heating elements OFF. (fig. 19) NOTE: Once a heat setting is selected, heat will be felt within two to five minutes. When the HI-level setting is selected, the heater will provide a boosted heat level during the first four minutes of operation. Then, the heat output will drop to the normal HI-level.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING MANUAL FRONT SEAT ADJUSTMENTS For models equipped with manual seats, the driver and passenger seats can be adjusted forward or rearward by using a bar located by the front of the seat cushion, near the floor. (fig. 20) While sitting in the seat, lift up on the bar located and move the seat forward or rearward. Release the bar once the desired position has been reached.
WARNING! • Adjusting a seat while the vehicle is moving is dangerous.The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust the seat only while the vehicle is parked. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES WARNING! Adjusting a seat while the vehicle is moving is dangerous.The sudden movement of the seat could cause you to lose control.Adjust any seat only while the vehicle is parked. HEAD RESTRAINTS Head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear impact. Head restraints should be adjusted so that the top of the head restraint is located above the top of your ear.
To raise the head restraint, pull upward on the head restraint. To lower the head restraint, press the push button, located at the base of the head restraint, and push downward on the head restraint. (fig. 24) • In the event of deployment of an Active Head Restraint, refer to “Occupant Restraints/Supplemental Active Head Restraints (AHR)/Resetting Active Head Restraints (AHR)” in “Safety” for further information. For comfort, the Active Head Restraints can be tilted forward and backward.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 46 WARNING! • Do not place items over the top of the Active Head Restraint, such as coats, seat covers or portable DVD players.These items may interfere with the operation of the Active Head Restraint in the event of a collision and could result in serious injury or death.
WARNING! Do not allow a passenger to sit in a third row seat without having the head restraint unfolded and locked in place. Failure to follow this warning may result in personal injury to the passenger in the event of a collision. 60/40 SPLIT SECOND-ROW PASSENGER SEATS To provide additional storage area, each second-row passenger seat can be folded flat. This allows for extended cargo space and still maintains some seating room if needed.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS WARNING! To prevent personal injury or damage to objects, keep your head, arms, and objects out of the folding path of the seatback. 4. Gently guide the seatback into the folded position. To Unfold The Seat Raise the seatback and lock it in place. WARNING! Be certain that the seatback is locked securely into position.
WARNING! • Adjusting a seat while the vehicle is moving is dangerous.The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust the seat only while the vehicle is parked. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked.
KNOWING YOUR VEHICLE Stadium Tip 'n Slide™ (Easy Entry/Exit Seat) — Seven Passenger Models This feature allows passengers to easily enter or exit the third-row passenger seats from either side of the vehicle. SAFETY To Move The Second-Row Passenger Seat Forward STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY NOTE: Raise the seatback/armrest before moving the seat to allow for full seat travel. Move the control lever on the upper outboard side of the seatback forward.
WARNING! Be certain that the seatback and seat are locked securely into position. Otherwise, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury. The seatback can also be locked in the reclined position. To do so, pull the latch release-loop located at the top of the seatback upward, allow the seatback to recline, and release the release-loop.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY WARNING! • Be certain that the seatback is locked securely into position. Otherwise, the seat will not provide the proper stability for passengers. An improperly latched seat could cause serious injury. • Do not allow a passenger to sit in a third row seat without having the head restraint unfolded and locked in place.
WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driving with the steering column unlocked could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your vehicle. Failure to follow this warning may result in serious injury or death. MIRRORS INSIDE DAY/NIGHT MIRROR A single ball joint mirror is provided in the vehicle. It is a twist on mirror that has a fixed position.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY AUTOMATIC DIMMING MIRROR — IF EQUIPPED This mirror automatically adjusts for headlight glare from vehicles behind you. This feature will be defaulted on, and only be disabled when the vehicle is moving in reverse. (fig. 38) To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean.
NOTE: A light in the selected button will illuminate indicating the mirror is activated and can be adjusted. POWER FOLDING MIRRORS — IF EQUIPPED The switch for the power folding mirrors is located between the power mirror switches L (left) and R (right). Press the switch once and the mirrors will fold in, pressing the switch a second time will return the mirrors to the normal driving position.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY CLIMATE CONTROLS GENERAL OVERVIEW The air conditioning and heating system is designed to make you comfortable in all types of weather. This system can be operated through either the Automatic Climate Controls on the instrument panel or through the Uconnect Touch™ system display. below the Uconnect Touch™ screen. (fig. 41) (fig. 42) (fig.
Soft-Keys Soft-keys are accessible on the Uconnect Touch™ system screen. (fig. 44) (fig. 45) Button Descriptions (Applies To Both Hard-keys And Soft-keys) 1. A/C Button Press and release to change the current Air Conditioning (A/C) setting; the indicator illuminates when A/C is ON. If equipped with ATC, performing this function will cause the automatic operation to switch into manual mode and the AUTO indicator will turn off. 2.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS equipped with ATC. The speeds can be selected using either hard-heys or soft-keys as follows: Hard-Keys The blower speed increases as you turn the control clockwise from the lowest blower setting. The blower speed decreases as you turn the knob counterclockwise. Soft-Key — Uconnect Touch™ System 4.3 Press the blower soft-key to enter the blower setting screen.
7. Passenger Temperature Control Down Button Provides the passenger with independent temperature control. Push the button for cooler temperature settings. NOTE: Pressing this button while in Sync mode will automatically exit Sync. 8. Climate Control OFF Button Press and release this button to turn the Climate Control ON/OFF. 9. AUTO Operation Button — If Equipped Automatically controls the interior cabin temperature by adjusting airflow distribution and amount.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 60 • Mix Mode Air comes from the floor, defrost and side window demist outlets. This mode works best in cold or snowy conditions. • Defrost Mode Air comes from the windshield and side window demist outlets. Use Defrost mode with maximum temperature settings for best windshield and side window defrosting and defogging.
turn off the Recirculation mode and allow outside air into the vehicle. NOTE: In cold weather, use of Recirculation mode may lead to excessive window fogging. The Recirculation mode is not allowed in Mix, Floor and Defrost modes to improve window clearing operation. Recirculation will be disabled automatically if these modes are selected. Attempting to use Recirculation while in these modes will cause the LED in the control button to blink and then turn off.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING REAR AUTOMATIC TEMPERATURE CONTROL (ATC) — IF EQUIPPED The rear ATC system has floor air outlets at the rear right side of the 3rd Row seats and overhead outlets at each outboard rear seating position. The system provides heated air through the floor outlets or cool, dehumidified air through the headliner outlets. The rear system temperature control is in the Uconnect Touch™ system, located on the instrument panel. (fig. 46) (fig.
• Press the Rear Temperature Lock button on the Uconnect Touch™ screen. This turns off the Rear Temperature Lock icon in the rear temperature knob. • Rotate the Rear Blower, Rear Temperature and the Rear Mode Control knobs to suit your comfort needs. • ATC is selected by adjusting the rear blower knob counterclockwise to AUTO. Once the desired temperature is displayed, the ATC System will automatically achieve and maintain that comfort level.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE on the temperature knob is illuminated and any rear overhead adjustments are ignored. REAR MODE CONTROL Auto Mode The rear system automatically maintains the correct mode and comfort level desired by the rear seat occupants. Headliner Mode Air comes from the outlets in the headliner. Each of these outlets can be individually adjusted to direct the flow of air.
Outside Air Intake A/C Air Filter Make sure the air intake, located directly in front of the The climate control system filters outside air containwindshield, is free of obstructions such as leaves. ing dust, pollen and some odors. Strong odors cannot Leaves collected in the air intake may reduce airflow, be totally filtered out. Refer to “Maintenance Proceand if they enter the plenum, they could plug the water dures” in “Servicing And Care” for filter replacement drains.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY LIGHTS HEADLIGHT SWITCH The headlight switch is located on the left side of the instrument panel. This switch controls the operation of the headlights, parking lights, instrument panel lights, instrument panel light dimming, interior lights and fog lights. (fig. 50) Rotate the headlight switch clockwise to the first detent for parking light and instrument panel light operation.
the headlights within 45 seconds. The delay interval begins when the headlight switch is turned off. NOTE: The lights must be turned off within 45 seconds of turning the ignition OFF to activate this feature. If you turn the headlights, park lights or ignition switch ON again, the system will cancel the delay. If you turn the headlights off before the ignition, they will turn off in the normal manner.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 68 NOTE: The fog lights will operate with the low beam headlights or parking lights on. However, selecting the high beam headlights will turn off the fog lights. MULTIFUNCTION LEVER The multifunction lever controls the operation of the turn signals, headlight beam selection and passing lights.
DOME LIGHT POSITION Rotate the dimmer control completely upward to the second detent to turn on the interior lights. The interior lights will remain on when the dimmer control is in this position. HEADLIGHT LEVELING SYSTEM — IF EQUIPPED This system allows the driver to maintain proper headlight beam position with the road surface regardless of vehicle load. INTERIOR LIGHT DEFEAT (OFF) Rotate the dimmer control to the extreme bottom off position. The interior lights will remain off when the doors are open.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE ILLUMINATED ENTRY The courtesy lights will turn on when you use the Remote Keyless Entry (RKE) transmitter to unlock the doors or open any door or liftgate. This feature also turns on the approach lighting in the outside mirrors (if equipped). Refer to “Mirrors” in “Knowing Your Vehicle” for further information.
There are five delay settings, which allow you to regulate the wipe interval from a minimum of one cycle every second to a maximum of approximately 36 seconds between cycles at vehicle speeds below 16 km/h. At speeds greater than 16 km/h, the delay varies to a maximum of approximately 18 seconds between cycles. WINDSHIELD WIPER OPERATION Rotate the end of the lever upward, to the first detent past the intermittent settings for low-speed wiper operation.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 72 • Turn the windshield wipers OFF when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper control is left in any position other than OFF. • In cold weather, always turn OFF the wiper switch and allow the wipers to return to the park position before turning OFF the engine.
HEADLIGHT WASHERS — IF EQUIPPED The Headlight Washers are recessed into the top of the fascia, centrally located below each headlight. The windshield wiper/washer control lever operates the headlight washers when the ignition switch is in the ON position and the headlights are ON. The lever is located on the left side of the steering column.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY • Turn the rear wiper off when driving through an automatic car wash. Damage to the rear wiper may result if the rear wiper switch is left in the on position. • In cold weather, always turn off the rear wiper switch and allow the rear wiper to return to the park position before turning off the engine.
ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 40 km/h. The Electronic Speed Control buttons are located on the right side of the steering wheel. (fig. 58) NOTE: In order to ensure proper operation, the Electronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at the same time.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 76 TO RESUME SPEED To resume a previously set speed, push the RES (+) button and release. Resume can be used at any speed above 32 km/h. TO ACCELERATE FOR PASSING Press the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed.
OVERHEAD CONSOLE The overhead console contains courtesy/reading lights, storage for sunglasses, an interior observation mirror and an optional power sunroof switch. (fig. 59) SUNGLASSES STORAGE To access the storage compartment, press on the raised bars on the compartment door in the center of the console and release and the door will swing downward. (fig. 61) COURTESY/READING LIGHTS The overhead console has two courtesy lights.
KNOWING YOUR VEHICLE POWER SUNROOF SWITCH — IF EQUIPPED Refer to “Power Sunroof” for further information. HAZARD WARNING FLASHERS The Hazard Warning flasher switch is located in the instrument panel switch bank, above the climate controls. Press the switch to turn on the Hazard Warning flasher. When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. Press the switch a second time to turn off the Hazard Warning flashers.
STORAGE KNOWING YOUR VEHICLE GLOVEBOX STORAGE The glovebox storage compartment is located on the passenger side of the instrument panel. Pull on the release handle to open the glovebox storage compartment. (fig. 63) SAFETY FLOOR CONSOLE STORAGE An open storage area, or cubby bin, is located in the floor console. (fig. 64) STARTING AND DRIVING CENTER CONSOLE STORAGE There is a storage compartment located under the center console armrest. (fig. 65) WARNING LIGHTS AND MESSAGES (fig.
KNOWING YOUR VEHICLE Pull upward on the release handle, located on the front of the lid, to open the storage compartment. (fig. 66) SLIDING ARMREST The center console armrest can also be slid rearward for easy access to the storage area. (fig. 67) SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES WARNING! Do not operate this vehicle with a console compartment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving.
WARNING! Be certain that the seat cushion is locked securely into position before using the seat. Otherwise, the seat will not provide the proper stability for passengers. An improperly latched seat cushion could cause serious injury. SECOND-ROW PASSENGER SEAT TEMPORARY STORAGE BIN This is a temporary storage bin designed for use when the seatback/armrest is down. Be sure to remove all items from this bin before raising the seatback/armrest.
KNOWING YOUR VEHICLE To access the bin, position the floor mat aside (if equipped). Pull the door latch release-loop upward to release the latch and then forward to open the bin door. (fig. 70) SAFETY The liner can be removed for easy cleaning by lifting on the notches as shown. (fig. 71) STARTING AND DRIVING ELECTRICAL POWER OUTLETS A 12 Volt (13 Amp) power outlet located in the center console below the radio. The power outlet has power available when the ignition switch in the ON/RUN or ACC position.
A fourth fused 12 Volt power outlet is located on the left quarter trim panel in the cargo area. This power outlet has power available when the ignition switch is in the ON or ACC position. (fig. 75) KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES (fig. 72) (fig. 74) Front 12 Volt Power Outlet Rear Seat 12 Volt Power Outlet IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS (fig. 73) (fig.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY • Do not exceed the maximum power of 160Watts (13 Amps) at 12Volts.If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. • The power outlet on the bottom of the center console shares the fuse with the power outlet on the back of the console.The combined usage must not exceed 160 Watts (13 Amps) at 12 Volts. • Power outlets are designed for accessory plugs only.
• Many accessories that can be plugged in draw power from the vehicle's battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle's battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.) will degrade the battery even more quickly. Only use these intermittently and with greater caution.
KNOWING YOUR VEHICLE SAFETY When the armrest is folded flat the cupholders are in the back of the Head Restraint. The Head Restraint can be adjusted to better position the cupholders. (fig. 78) For vehicles equipped with third row seating, there are additional cupholders located in the trim panels. STARTING AND DRIVING In addition to cupholders, vehicles may also be equipped with bottle holders. The bottle holders are located on the door trim panels. (fig.
POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console. (fig. 80) WARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. (Continued) (Continued) • In a collision, there is a greater risk of being thrown from a vehicle with an open sunroof.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 88 CLOSING SUNROOF — EXPRESS Press the switch forward and release it within one-half second and the sunroof will close automatically from any position. The sunroof will close fully and stop automatically. This is called “Express Close”. During Express Close operation, any movement of the switch will stop the sunroof.
SUNROOF MAINTENANCE Use only a nonabrasive cleaner and a soft cloth to clean the glass panel. IGNITION OFF OPERATION The power sunroof switches remain active for up to approximately ten minutes after the ignition switch has been turned OFF. Opening either front door will cancel this feature. NOTE: The delay time is programmable using the Uconnect Touch™ system. Refer to “Uconnect Touch™ Settings” for further information.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 90 WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors before you drive as well as when you park and leave the vehicle. • When leaving the vehicle, always remove the Key Fob from the vehicle and lock your vehicle. Unsupervised use of vehicle equipment may cause severe personal injuries or death.
Automatic Unlock Doors On Exit The doors will unlock automatically on vehicles with power door locks if: 1. The Automatic Unlock Doors On Exit feature is enabled. 2. The transmission was in gear and the vehicle speed returned to 0 km/h. 3. The transmission is in NEUTRAL or PARK. 4. The driver door is opened. 5. The doors were not previously unlocked. 6. The vehicle speed is 0 km/h. To change the current setting, refer to “Uconnect Touch™ Settings” in “Knowing Your Vehicle” for further information.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY CHILD-PROTECTION DOOR LOCK SYSTEM — REAR DOORS To provide a safer environment for small children riding in the rear seats, the rear doors are equipped with a Child-Protection Door Lock system. WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged.
To Disengage The Child-Protection Door Lock System 1. Open the rear door. 2. Insert the tip of the emergency key (or alike) into the child lock control and rotate it to the UNLOCK position. (fig. 85) 3. Repeat Steps 1 and 2 for the opposite rear door. NOTE: After disengaging the Child-Protection Door Lock system, always test the door from the inside to make certain it is in the desired position.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY NOTE: If “Unlock All Doors 1st Press” is programmed all doors will unlock when you grab hold of the driver’s front door handle. To select between “Unlock Driver Door 1st Press” and “Unlock All Doors 1st Press”, refer to “Uconnect Touch™ Settings” in “Knowing Your Vehicle” for further information. To Unlock From The Passenger Side: With a valid Passive Entry RKE transmitter within 1.
If one of the vehicle doors is open and the door panel switch is used to lock the vehicle, once all open doors have been closed the vehicle checks the inside and outside of the vehicle for any valid Passive Entry RKE transmitters.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY WINDOWS POWER WINDOWS The window controls on the driver's door trim panel control all of the door windows. (fig. 89) There are single window controls on each passenger door trim panel, which operate the passenger door windows. The window controls will operate when the ignition is in the ON/RUN or ACC position.
To close the window part way, pull the window switch up to the first detent and release it when you want the window to stop. NOTE: • If the window runs into any obstacle during Autoclosure, it will reverse direction and then go back down. Remove the obstacle and use the window switch again to close the window. • Any impact due to rough road conditions may trigger the auto-reverse function unexpectedly during autoclosure.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY WIND BUFFETING Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions. This is a normal occurrence and can be minimized.
NOTE: Because the gas pressure drops with temperature, it may be necessary to assist the props when opening the liftgate in cold weather. WARNING! • Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. These fumes could injure you and your passengers.Keep the liftgate closed when you are operating the vehicle. • If you are required to drive with the liftgate open, make sure that all windows are closed, and the blower switch on the climate control is set at high speed.
CARGO MANAGEMENT SYSTEM KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES FIVE PASSENGER SYSTEM FEATURES • A raised load floor that sits on top of a large built-in storage bin. • A tri-fold door built into the load floor that allows easy access to items in the built-in storage bin. • 60/40 split second-row passenger seats with fold flat feature, which allows for extended cargo space. Refer to “Seats” for further information.
WARNING! The weight and position of cargo and passengers can change the vehicle center of gravity and vehicle handling.To avoid loss of control resulting in personal injury, follow these guidelines for loading your vehicle: • Do not carry loads that exceed the load limits described on the label attached to the left door or left door center pillar. • Always place cargo evenly on the cargo floor. Put heavier objects as low and as far forward as possible.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES To install the cover, position it in the vehicle so that the flat side of the housing faces upward. Then, insert either the left or the right spring-loaded post (located on the ends of the cover housing) into the left attachment point or the right attachment point (shown). (fig. 95) Insert the spring-loaded post on the opposite end of the cover housing into the attachment point on the opposite side of the vehicle.
TO OPEN AND CLOSE THE HOOD KNOWING YOUR VEHICLE Two latches must be released to open the hood. 1. Pull the hood release lever located under the left side of the instrument panel. (fig. 97) 2. Outside of the vehicle, locate the safety latch lever near the center of the grille between the grille and hood opening. Push the safety latch lever to the right and then raise the hood. (fig. 98) SAFETY STARTING AND DRIVING Use the hood prop rod to secure the hood in the open position.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 104 To prevent possible damage: • Before closing hood, make sure the hood prop rod is fully seated into its storage retaining clips. • Do not slam the hood to close it. Use a firm downward push at the center front edge of the hood to ensure that both latches engage. Never drive your vehicle unless the hood is fully closed, with both latches engaged.
• To avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity of 68 kg. Always distribute loads as evenly as possible and secure the load appropriately. • Long loads, which extend over the windshield, such as wood panels or surfboards, or loads with large frontal area should be secured to both the front and rear of the vehicle. • Place a blanket or other protection between the surface of the roof and the load.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 106 (Continued) • Driving a vehicle with the “Brake SystemWarning Light” on is dangerous.A significant decrease in braking performance or vehicle stability during braking may occur. It will take you longer to stop the vehicle or will make your vehicle harder to control.You could have an accident. Have the vehicle checked immediately.
• The ABS motor running (it may continue to run for a short time after the stop), • The clicking sound of solenoid valves, • Brake pedal pulsations, and • A slight drop or fall away of the brake pedal at the end of the stop. These are all normal characteristics of ABS. WARNING! • The ABS contains sophisticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 108 If both the Brake System Warning Light and the ABS Light remain on, the ABS and Electronic Brake Force Distribution (EBD) systems are not functioning. Immediate repair to the ABS system is required. BRAKE ASSIST SYSTEM (BAS) The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers.
WARNING! Many factors, such as vehicle loading, road conditions, and driving conditions, influence the chance that wheel lift or rollover may occur. ERM cannot prevent all wheel lift or rollovers,especially those that involve leaving the roadway or striking objects or other vehicles.The capabilities of an ERM-equipped vehicle must never be exploited in a reckless or dangerous manner, which could jeopardize the user's safety or the safety of others.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY ESC ACTIVATION/MALFUNCTION INDICATOR LIGHT AND ESC OFF INDICATOR LIGHT The “ESC Activation/Malfunction Indicator Light” in the instrument cluster will come on when the ignition switch is turned to the ON position. It should go out with the engine running. If the “ESC Activation/Malfunction Indicator Light” comes on continuously with the engine running, a malfunction has been detected in the ESC system.
NOTE: The TSC is disabled when the ESC system is in the “Partial Off” mode. WARNING! • TSC cannot stop all trailers from swaying. Always use caution when towing a trailer and follow the tongue weight recommendations. Refer to “TrailerTowing” in “Starting and Driving” for further information. • If TSC activates while towing a trailer, stop the vehicle at the nearest safe location and adjust the trailer load to eliminate the trailer sway.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 112 LOOSE FUEL FILLER CAP MESSAGE If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, the word “gASCAP” will display in the odometer. If this occurs, tighten the fuel filler cap until a “clicking” sound is heard and press the TRIP ODOMETER button to turn off the message.
Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible. Damage to the power steering pump may occur. POWER STEERING FLUID CHECK Checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as anticipated.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS TIRE PRESSURE MONITOR SYSTEM (TPMS) The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure. The tire pressure will vary with temperature by about 6.9 kPa for every 6.5°C. This means that when the outside temperature decreases, the tire pressure will decrease.
• The TPMS should not be used as a tire pressure gauge while adjusting your tire pressure. • Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Underinflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING 3. Lots of snow or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPMS sensors. NOTE: 1. The compact spare tire does not have a tire pressure monitoring sensor. Therefore, the TPMS will not monitor the pressure in the compact spare tire. WARNING LIGHTS AND MESSAGES 2.
The TPMS consists of the following components: • Receiver module • Four Tire Pressure Monitoring Sensors • Three Trigger modules (mounted in three of the four wheel-wells) • Various Tire Pressure Monitoring System messages, which display in the Electronic Vehicle Information Center (EVIC) • Tire Pressure Monitoring Telltale Light Should this occur, you should stop as soon as possible and inflate the tires with low pressure (those flashing in the EVIC graphic) to the vehicle’s recommended cold placard press
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES Check TPMS Warning When a system fault is detected, the Tire Pressure Monitoring Telltale Light will flash on and off for 75 seconds and then remain on solid. The system fault will also sound a chime. In addition, the EVIC will display a "CHECK TPM SYSTEM" message for three seconds and then display dashes (- -) in place of the pressure value to indicate which sensor is not being received. (fig.
will display a "CHECK TPM SYSTEM" message for three seconds and then display dashes (- -) in place of the pressure value. Pressure Monitoring Telltale Light, or display the text message in the EVIC. However, the graphic will still display “- -.“ 5. Once you repair or replace the original road tire and reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically.
KNOWING YOUR VEHICLE PARKSENSE® REAR PARK ASSIST — IF EQUIPPED The ParkSense® Rear Park Assist system provides visual and audible indications of the distance between the rear fascia and a detected obstacle when backing SAFETY up, e.g. during a parking maneuver. Refer to “ParkSense® System Usage Precautions” for limitations of this system and recommendations.
The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES (fig. 106) (fig. 104) Fast Tone Rear Park Assist OFF IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS (fig. 105) (fig.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 122 Rear Distance (cm) Audible Alert Chime Display Message Greater than 200 cm None Park Assist On Arcs None WARNING ALERTS 200-100 cm 100-65 cm Single 1/2Second Tone Warning Object Detected 3 Solid (Continuous) Enabling And Disabling ParkSense® ParkSense® can be enabled and disabled using the Uconnect Touch™ System.
If “SERVICE PARK ASSIST SYSTEM” appears in the EVIC, see your authorized dealer. false indication that an obstacle is behind the fascia/ bumper. Cleaning The ParkSense® System Clean the ParkSense® sensors with water, car wash soap and a soft cloth. Do not use rough or hard cloths. Do not scratch or poke the sensors. Otherwise, you could damage the sensors. • Objects such as bicycle carriers, trailer hitches, etc., must not be placed within 30 cm from the rear fascia/ bumper while driving the vehicle.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS WARNING! • Drivers must be careful when backing up even when using the ParkSense® Rear Park Assist system. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before backing up. You are responsible for safety and must continue to pay attention to your surroundings.
WARNING! Drivers must be careful when backing up even when using the ParkView® Rear Back Up Camera.Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, obstructions, or blind spots before backing up.You are responsible for the safety of your surroundings and must continue to pay attention while backing up. Failure to do so can result in serious injury or death. • To avoid vehicle damage, ParkView® should only be used as a parking aid.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 126 SOUND SYSTEMS Refer to your Uconnect Touch™ User Manual. NAVIGATION SYSTEM — IF EQUIPPED Refer to your Navigation User's Manual.
STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel. The left and righthand controls are rocker-type switches with a pushbutton in the center of each switch. Reach behind the steering wheel to access the switches. (fig. 108) RIGHT-HAND SWITCH FUNCTIONS • Press the top of the switch to increase the volume. • Press the bottom of the switch to decrease the volume. • Press the button in the center of the switch to change modes (i.e.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES VIDEO ENTERTAINMENT SYSTEM (VES)™ — IF EQUIPPED The optional Video Entertainment System (VES)™ includes the following components for rear seat entertainment: • A diagonal 9 in (22 cm) Liquid Crystal Display (LCD) screen integrated into the center overhead console. The screen features brightness control for optimum daytime and nighttime viewing.
iPod®/USB/MP3 CONTROL — IF EQUIPPED iPod® This feature allows an or external USB device to be plugged into the USB port. iPod® control supports Mini, 4G, Photo, Nano, 5G iPod® and iPhone® devices. Some iPod® software versions may not fully support the iPod® control features. Please visit Apple’s website for software updates. For further information, refer to the Uconnect Touch™ User’s Manual. CD/DVD DISC MAINTENANCE To keep a CD/DVD in good condition, take the following precautions: 1.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES RADIO OPERATION AND MOBILE PHONES Under certain conditions, the mobile phone being on in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the mobile phone antenna. This condition is not harmful to the radio.
5. To replace the cap, insert it into the filler neck and tighten to the right until at least three clicks are heard. • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. • A poorly fitting gas cap may cause the “Malfunction Indicator Light” to turn on. • To avoid fuel spillage and overfilling,do not“top off ” the fuel tank after filling.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 132 SAFETY OCCUPANT RESTRAINTS Some of the most important safety features in your vehicle are the restraint systems: • Three-point lap and shoulder belts for all seating positions • Advanced Front Air Bags for driver and front passenger • Supplemental Active Head Restraints (AHR) located on top of the front seats (integrated into the head restraint) • Suppleme
Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in an accident. Some of the worst injuries happen when people are thrown from the vehicle. Seat belts reduce the possibility of ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. LAP/SHOULDER BELTS All seating positions in your vehicle are equipped with a combination lap/shoulder belts.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY (Continued) • Care should be taken to avoid contamination of the webbing with polishes, oils and chemicals, and particularly battery acid. Cleaning may be safely carried out using mild soap and water.The belt should be replaced if webbing becomes frayed, contaminated, or damaged. 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” (fig.
WARNING! • A belt that is buckled into the wrong buckle will not protect you properly.The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly.In a sudden stop,you could move too far forward, increasing the possibility of injury.Wear your seat belt snugly. • A belt that is worn under your arm is dangerous.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. WARNING! A frayed or torn belt could rip apart in an accident and leave you with no protection.
SEAT BELTS IN PASSENGER SEATING POSITIONS The seat belts in the passenger seating positions are equipped with an Automatic Locking Retractor (ALR) or a cinching latch plate which are used to secure a child restraint system. For additional information refer to “Installing Child Restraints Using the Vehicle Seat Belt” under the “Child Restraint” section. The chart below defines the type of feature for each seating position.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 138 WARNING! • The belt and retractor assembly must be replaced if the seat belt assembly Automatic Locking Retractor (ALR) feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual. • Failure to replace the belt and retractor assembly could increase the risk of injury in collisions.
NOTE: The Active Head Restraints (AHR) may or may not deploy in the event of a front or side impact. However if during a front impact, a secondary rear impact occurs, the AHR may deploy based on the severity and type of the impact. (fig. 115) All occupants, including the driver, should not operate a vehicle or sit in a vehicle's seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of an accident.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. (fig. 117) (fig. 118) 4. The AHR front soft foam and trim half should lock into the back decorative plastic half. (fig. 119) NOTE: • If you have difficulties or problems resetting the Active Head Restraints, see an authorized dealer. • For safety reasons, have the Active Head Restraints checked by a qualified specialist at an authorized dealer.
ENHANCED SEAT BELT USE REMINDER SYSTEM (BELTALERT®) BeltAlert® is a feature intended to remind the driver and front passenger (if equipped with front passenger BeltAlert®) to fasten their seat belts. This feature is active whenever the ignition is on. If the driver or front seat passenger is unbelted, the Seat Belt Reminder Light will turn on and remain on until both front seat belts are fastened. BeltAlert® triggers within 60 seconds of vehicle speed over 8 km/h.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS Mass Group Group — up to 10 kg Group 0+ — up to 13 kg Group 1 – 9 to 18 kg Group II – 15 to 25 kg Group III — 22 to 36 kg Front Passenger X X X X X Seating Position (or other site) Intermediate Rear Outboard Rear Center Outboard *U N/A **U *U N/A **U *U N/A **U *U N/A **U *U N/A **U Key of letters used in the table above: U = Suitable for “universal” category restrain
WARNING! • “Extreme Hazard! Do not use a rearward-facing child restraint on a seat protected by an air bag in front of it!” Refer to visor and door shut face mounted labels for information. • In a collision, an unrestrained child, even a tiny baby, can become a projectile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are.The child and others could be badly injured.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 144 height limit of their rear-facing convertible child seat. Children should remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height allowed by the child seat. These child seats are also held in the vehicle by the lap/shoulder belt or the ISOFIX child restraint anchorage system.
5. Grasp the latch plate and pull out the seat belt. 6. Slide the latch plate up the webbing as far as necessary to allow the seat belt to go around the child's lap. NOTE: The lap portion of the seat belt should be low on the hips and as snug as possible. 7. Once the seat belt is long enough to fit properly, insert the latch plate into the buckle until you hear a “click.” (fig. 123) 8. To remove the slack from the lap belt, pull upward on the shoulder portion of the seat belt. 9.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 146 WARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision.The child could be badly injured or killed. Follow the manufacturer's directions exactly when installing an infant or child restraint. • A rearward-facing child restraint should only be used in a rear seat.
All three second-row passenger seating positions have lower anchorages that are capable of accommodating ISOFIX-compatible child seats. You should never install ISOFIX-compatible child seats so that two seats share a common lower anchorage. If installing child seats in adjacent seating positions, or if your child restraints are not ISOFIX-compatible, install the restraints using the vehicle's seat belts. (fig. 124) KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING (fig.
KNOWING YOUR VEHICLE Vehicle ISOFIX Positions Chart Mass Group SAFETY Carrycot STARTING AND DRIVING 0 — up to 10 kg WARNING LIGHTS AND MESSAGES 0+ — up to 13 kg IN AN EMERGENCY I – 9 to 18 kg SERVICING AND CARE TECHNICAL SPECIFICATIONS II – 15 to 25 kg III – 22 to 36 kg Size Class F G E E D C D C B B1 A Fixture Front Passenger Rear Outboard Rear Center ISO/L1 ISO/L2 (1) ISO/R1 (1) ISO/R1 ISO/R2 ISO/R3 (1) ISO/R2 ISO/R3 ISO/F2 ISO/F2X ISO/F3 (1) (1) X X X X X X X X X X X X X X X X X X X X X
IL = Suitable for particular ISOFIX child restraint systems (CRS) given in the attached list. These ISOFIX CRS are those of the “specific vehicle”, “restricted” or “semi-universal” catagories. X = ISOFIX position not suitable for ISOFIX child restraint systems in this mass group and / or this size class. * = Seats in front of child restraint seats may need to be adjusted forward to install the child restraint seat. ** = No access to 3rd row seating positions if Carrycot is installed in vehicle.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 150 Many, but not all, restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means of adjusting the tension in the strap.
Installing Child Restraints Using The Vehicle Seat Belt The seat belts in the passenger seating positions are equipped with an Automatic Locking Retractor (ALR) or a cinching latch plate to secure a Child Restraint System (CRS). These types of seat belts are designed to keep the lap portion of the seat belt tight around the child restraint so that it is not necessary to use a locking clip.
To attach a child restraint tether strap: KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY • Route the tether strap to provide the most direct path for the strap between the anchor and the child seat, preferably between the head restraint posts underneath the head restraint. For center seating position, adjust the head restraint to the upward position and route the tether strap between the head restraint posts underneath the head restraint.
SUPPLEMENTAL RESTRAINT SYSTEM (SRS) — AIR BAGS This vehicle has Advanced Front Air Bags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver's Advanced Front Air Bag is mounted in the center of the steering wheel. The passenger's Advanced Front Air Bag is mounted in the instrument panel, above the glove compartment. The words SRS AIRBAG are embossed on the air bag covers. (fig.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 154 • Passenger Advanced Front Air Bag • Supplemental Seat-Mounted Side Air Bags (SAB) • Supplemental Side Air Bag Inflatable Curtains (SABIC) • Front and Side Impact Sensors • Front Seat Belt Pretensioners, Seat Belt Buckle Switch • Supplemental Active Head Restraint for Driver and Front Passenger ADVANCED FRONT AIR BAG FEATURES The Advanced Front Air Bag sys
When the air bag deploys, it opens the seam between the front and side of the seat's trim cover. Each air bag deploys independently; a left side impact deploys the left air bag only and a right-side impact deploys the right air bag only. Supplemental Side Air Bag Inflatable Curtain (SABIC) SABIC air bags may offer side-impact and vehicle rollover protection to front and rear seat outboard occupants in addition to that provided by the body structure.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS WARNING! • Your vehicle is equipped with left and right Supplemental Side Air Bag Inflatable Curtain (SABIC), do not stack luggage or other cargo up high enough to block the location of the SABIC. The area where the SABIC is located should remain free from any obstructions.
If the air bag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided under "If You Need Assistance". WARNING! • Relying on the air bags alone could lead to more severe injuries in a collision. The air bags work with your seat belt to restrain you properly. In some collisions, the air bags won't deploy at all. Always wear your seat belts even though you have air bags.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING The ORC monitors the readiness of the electronic parts of the air bag system whenever the ignition is in the ON/RUN position. If the ignition is in the OFF position, or in the ACC position, the air bag system is not on and the air bags will not inflate. The ORC contains a backup power supply system that may deploy the air bags even if the battery loses power or it becomes disconnected prior to deployment.
Supplemental Seat-Mounted Side Air Bag (SAB) Inflator Units The Supplemental Seat-Mounted Side Air Bags (SAB) are designed to activate only in certain side collisions. The ORC determines if a side collision requires the side air bags to inflate, based on the severity and type of collision. Based on the severity and type of collision, the side air bag inflator on the crash side of the vehicle may be triggered, releasing a quantity of non-toxic gas.
• Unlock the doors automatically. KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 160 If A Deployment Occurs The Advanced Front Air Bags are designed to deflate immediately after deployment. NOTE: Front and/or side air bags will not deploy in all collisions. This does not mean something is wrong with the air bag system.
(Continued) • It is dangerous to try to repair any part of the air bag system yourself. Be sure to tell anyone who works on your vehicle that it has an air bag system. • Do not attempt to modify any part of your air bag system.The air bag may inflate accidentally or may not function properly if modifications are made.Take your vehicle to an authorized dealer for any air bag system service.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 162 • How fast the vehicle was traveling. SAFETY TIPS These data can help provide a better understanding of the circumstances in which crashes and injuries occur. TRANSPORTING PASSENGERS NEVER TRANSPORT PASSENGERS IN THE CARGO AREA.
(Continued) • On seven passenger models, do not allow a passenger to sit in a third row seat with the second row seatback(s) folded flat. In a collision, the passenger could slide underneath the seat belt and be seriously or even fatally injured. EXHAUST GAS WARNING! • Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 164 Air Bag Warning Light The light should turn on and remain on for four to six seconds as a bulb check when the ignition switch is first turned ON. If the light is not lit during starting, or if the light stays on, flickers, or turns on while driving, have the system checked by an authorized dealer.
PERIODIC SAFETY CHECKS YOU SHOULD MAKE OUTSIDE THE VEHICLE Door Latches Check for positive closing, latching, and locking. Tires Examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks. Inspect sidewalls for cuts, cracks and bulges. Check the wheel nuts for tightness. Check the tires (including spare) for proper cold inflation pressure.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 166 STARTING AND DRIVING ENGINE BREAK-IN RECOMMENDATIONS A long break-in period is not required for the engine and drivetrain (transmission and axle) in your vehicle. Drive moderately during the first 500 km. After the initial 100 km, speeds up to 80 or 90 km/h are desirable.
KEYLESS ENTER-N-GO This feature allows the driver to operate the ignition switch with the push of a button, as long as the Remote Keyless Entry (RKE) transmitter is in the passenger compartment. NORMAL STARTING – DIESEL ENGINE Using the ENGINE START/STOP Button 1. Turn the ignition switch to the ON position by pressing the ENGINE START/STOP button twice. 2. Watch the “Wait To Start Indicator Light” in the instrument cluster.
Turbocharger “Cool Down” KNOWING YOUR VEHICLE NOTE: Letting the engine idle after extended operation allows the turbine housing to cool to normal operating temperature.
PARKING BRAKE Before leaving the vehicle, make sure that the parking brake is fully applied. Also, be certain to leave the transmission in REVERSE or first gear. The parking brake lever is located in the center console. To apply the parking brake, pull the lever up as firmly as possible. To release the parking brake, pull the lever up slightly, press the center button, then lower the lever completely. (fig.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY MANUAL TRANSMISSION WARNING! You or others could be injured if you leave the vehicle unattended without having the parking brake fully applied.The parking brake should always be applied when the driver is not in the vehicle, especially on an incline. Fully press the clutch pedal before you shift gears. As you release the clutch pedal, lightly press the accelerator pedal. (fig.
DRIVING ON SLIPPERY SURFACES ACCELERATION Rapid acceleration on snow covered, wet, or other slippery surfaces may cause the driving wheels to pull erratically to the right or left. This phenomenon occurs when there is a difference in the surface traction under the front (driving) wheels. WARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the front wheels. You could lose control of the vehicle and possibly have a collision.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 172 DRIVING THROUGH WATER Driving through water more than a few centimeters deep will require extra caution to ensure safety and prevent damage to your vehicle. FLOWING/RISING WATER WARNING! Do not drive on, or cross, a road or a path where water is flowing and/or rising (as in storm run-off).
WARNING! • Driving through standing water limits your vehicle’s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water. • Driving through standing water limits your vehicle’s braking capabilities, which increases stopping distances. Therefore, after driving through standing water, drive slowly and lightly press on the brake pedal several times to dry the brakes. • Getting water inside your vehicle’s engine can cause it to lock up and stall out, and leave you stranded.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 174 TRAILER TOWING In this section, you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer, carefully review this information to tow your load as efficiently and safely as possible.
WARNING! An improperly adjusted hitch system may reduce handling, stability and braking performance and could result in an accident. Consult with your hitch and trailer manufacturer or a reputable trailer/dealer for additional information. Frontal Area The frontal area is the maximum height multiplied by the maximum width of the front of a trailer.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES • For fixed ball tow bar, attach the clip directly to the designated point. This alternative must be specifically permitted by the trailer manufacturer since the clip may not be sufficiently strong for use in the way. (fig. 135) Without Attachment Points • For detachable ball tow bar, you must follow the recommended manufacturer or supplier procedure. (fig.
TRAILER TOWING WEIGHTS (MAXIMUM TRAILER WEIGHT RATINGS) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ Transmission Frontal Area Max. GTW (Gross Trailer Wt.) (5–Passenger Model 1 100 kg Max. GTW (Gross Trailer Wt.) (7–Passenger Model 1 100 kg Max.Tongue Wt. Max.Tongue Wt. ◊ (5–Passenger ◊ (7–Passenger Model) Model) 2.0L Diesel/ 3.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 178 TOWING REQUIREMENTS To promote proper break-in of your new vehicle drivetrain components the following guidelines are recommended: • Do not tow a trailer at all during the first 805 km the new vehicle is driven.The engine, axle or other parts could be damaged.
Towing Requirements – Tires − Do not attempt to tow a trailer while using a compact spare tire. − Proper tire inflation pressures are essential for the safe and satisfactory operation of your vehicle. Refer to “Tires – General Information” in “Technical Specifications” for proper tire inflation procedures. − Check the trailer tires for proper tire inflation pressures before trailer usage. − Check for signs of tire wear or visible tire damage before towing a trailer.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY NOTE: Do not cut or splice wiring into the vehicles wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. (fig. 138) Pin Number 1 2 3 4 5 6 Function Left Turn Signal Rear Fog Light Ground/Common Return Right Turn Signal Right Rear Position, Side Marker Lights, and Rear Registration Plate Illumination Device.
Pin Number 5 Function Wire Color Right Rear Position, Brown Side Marker Lights, and Rear Registration Plate Illumination Device.b 6 Stoplights Red Black 7 Left Rear Position, Side Marker Lights, and Rear Registration Plate Illumination Device.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING TRAILER HITCH ATTACHING POINTS Your vehicle will require extra equipment to tow a trailer safely and efficiently. The trailer tow hitch must be attached to your vehicle using the provided attaching points on the vehicle's frame. Refer to the following chart to determine the accurate attaching points.
RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE Towing Condition Flat Tow Wheels OFF the Ground NONE Dolly Tow Front Rear On Trailer ALL Manual Transmission • Trans in NEUTRAL • Key in ACC OK NO OK NOTE: Vehicles equipped with manual transmissions may be recreationally towed (flat towed) at any legal highway speed, for any distance, if the manual transmission is in NEUTRAL and the ignition key is in the ACC position.
KNOWING YOUR VEHICLE WARNING LIGHTS AND MESSAGES INSTRUMENT CLUSTER (fig. 141) SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 184 (fig.
INSTRUMENT CLUSTER DESCRIPTIONS 1. Air Bag Warning Light This light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to ON/RUN. If the light is either not on during starting, stays on, or turns on while driving, have the system inspected at an authorized dealer as soon as possible. Refer to “Occupant Restraints” in “Safety” for further information. 2.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY NOTE: • The “ESC Off Indicator Light” and the “ESC Activation/Malfunction Indicator Light” come on momentarily each time the ignition switch is turned to ON/RUN. • Each time the ignition is turned to ON/RUN, the ESC system will be ON, even if it was turned off previously. • The ESC system will make buzzing or clicking sounds when it is active.
vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.) As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly underinflated.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS if the driver's seat belt is unbuckled, a chime will sound. After the bulb check or when driving, if the driver seat belt remains unbuckled, the Seat Belt Warning Light will flash or remain on continuously. Refer to “Occupant Restraints” in “Safety” for further information. 11.
NOTE: This light shows only that the parking brake is applied. It does not show the degree of brake application. 12. Anti-Lock Brake (ABS) Light This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the ignition switch is turned to the ON/RUN position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 190 IN AN EMERGENCY JUMP-STARTING If your vehicle has a discharged battery, it can be jump-started using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. Jump-starting can be dangerous if done improperly so please follow the procedures in this section carefully.
WARNING! • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is ON.You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact.You could be seriously injured. • Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas which is flammable and explosive. Keep open flames or sparks away from the battery. 1.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 192 5. Start the engine in the vehicle that has the booster battery, let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery. Once the engine is started, remove the jumper cables in the reverse sequence: 6.
JACKING AND TIRE CHANGING WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 194 3. Set the parking brake. 4. Place the shift lever in PARK. 5. Turn OFF the ignition. 6. Block both the front and rear of the wheel diagonally opposite of the jacking position. For example, if changing the right front tire, block the left rear wheel. NOTE: Passengers should not remain in the vehicle when the vehicle is being jacked.
Spare Tire Stowage NOTE: Refer to “Spare Tire Removal” for information on assembling the winch tools. 1. Place the spare tire near to the winch cable. Hold the spare upright so that the tire's tread is on the ground and the valve stem is at the top of the wheel facing away from the rear of the vehicle. 2. Tilt the retainer at the end of the winch cable and drop it through the center of the wheel. Then place the spare tire with the cable and retainer underneath the vehicle. (fig.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE (Continued) • Only use the jack in the positions indicated and for lifting this vehicle during a tire change. • If working on or near a roadway, be extremely careful of motor traffic. • To assure that spare tires, flat or inflated, are securely stowed, spares must be stowed with the valve stem facing the ground. (fig.
5. Remove the wheel nuts. For vehicles so equipped, remove the wheel cover from the wheel by hand. Do not pry the wheel cover off. Then pull the wheel off the hub. WARNING! To avoid possible personal injury, handle the wheel covers with care to avoid contact with any sharp edges. 6. Install the spare tire. Be sure to mount the spare tire with the valve stem facing outward. The vehicle could be damaged if the spare tire is mounted incorrectly. (fig.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 198 • Refer to “Compact Spare Tire” and to “Limited-Use Spare” under “Tires — General Information” in “Starting and Operating” for additional warnings, cautions, and information about the spare tire, its use, and operation. 7. Install the wheel nuts with the cone-shaped end of the nut toward the wheel. Lightly tighten the wheel nuts.
WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. (fig. 151) 3. Align the valve notch in the wheel cover with the valve stem on the wheel. Install the cover by hand, snapping the cover over the two lug nuts. Do not use a hammer or excessive force to install the cover. (fig.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 200 WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. 3. Lower the vehicle to the ground by turning the jack handle counterclockwise. 4. Finish tightening the lug nuts.
BULB REPLACEMENT LOW BEAM/HIGH BEAM/FRONT TURN SIGNAL AND FRONT POSITION LAMP 1. Open the hood. NOTE: It may be necessary to remove the air cleaner filter housing and position the Totally Integrated Power Module (TIPM) aside to replace certain lamps in the left headlamp housing. 2. Rotate the applicable bulb and connector assembly 1∕4 turn counterclockwise and remove the assembly from the headlamp housing. (fig. 152) 3. Disconnect the bulb from the harness connector and then connect the replacement bulb.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. 3. Disconnect the electrical harness connector. (fig. 155) 6. Insert bulb into the lamp housing until the index tabs are engaged in the slots of the collar. 7.
4. Firmly grasp the bulb by the two side latches and squeeze them together to unlock the bulb from the back of the lamp housing. 5. Pull the bulb straight out from the keyed opening in the housing 6. Remove the bulb from the connector socket and install the replacement bulb. 7. Align the index tabs of the replacement rear fog lamp bulb/socket assembly with the slots in the collar of the bulb opening on the back of the lamp housing. 8.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES 4. Rotate the applicable bulb's electrical connector 1∕4 turn counterclockwise and remove it from the taillamp housing. 5. Remove the bulb from the connector socket and install the replacement bulb. 6. Install the bulb and connector assembly into the taillamp housing and rotate the connector 1∕4 turn clockwise to lock it in place. 7. Reinstall the taillamp housing and fasteners. 3.
4. Rotate the applicable bulb's electrical connector 1∕4 turn counterclockwise and remove it from the housing. 5. Remove the bulb from the connector socket and install the replacement bulb. 6. Install the bulb and connector assembly into the housing and rotate the connector 1∕4 turn clockwise to lock it in place. 7. Reinstall the taillamp housing and fasteners. LICENSE PLATE LAMP 1. Push the small locking tab sticking out of the end of the lens toward the side of the vehicle and hold it in that position.
KNOWING YOUR VEHICLE SAFETY FUSES INTERIOR FUSES The interior fuse panel is located on the passenger side under the instrument panel.
Cavity F127 F128 F129 Cartridge Mini-Fuse Fuse 20 Amp Yellow 15 Amp Blue 15 Amp Blue F130 15 Amp Blue F131 10 Amp Red F132 F133 10 Amp Red 10 Amp Red Description Trailer Tow – If Equipped Radio Video/DVD – If Equipped Climate Control/Instrument Panel Passenger Assistance/Hands Free System – If Equipped Tire Pressure Module Spare UNDERHOOD FUSES (POWER DISTRIBUTION CENTER) The power distribution center is located in the engine compartment. (fig.
KNOWING YOUR VEHICLE Cavity F106 Cartridge Mini-Fuse Fuse Interior Power Distribution Center Rail Run/Accessory Relays Climate Control System Blower Power Locks 60 Amp Yellow SAFETY F139 STARTING AND DRIVING F140 F141 WARNING LIGHTS AND MESSAGES F142 F143 IN AN EMERGENCY F144 SERVICING AND CARE F145 TECHNICAL SPECIFICATIONS F147 F146 F148 CONTENTS 208 F149 F150 Description 40 Amp Green 30 Amp Pink 40 Amp Green 40 Amp Green 40 Amp Green 40 Amp Green 30 Amp Pink 30 Amp Pink 30 Amp Pink 40
Cavity F166 F167 F168 F169 F170 F172 F173 F174 F175 F176 F177 F178 F179 Cartridge Mini-Fuse Fuse 20 Amp Yellow 30 Amp Green 10 Amp Red 40 Amp Green 15 Amp Blue 20 Amp Yellow 25 Amp Natural 20 Amp Yellow 30 Amp Green 10 Amp Red 20 Amp Yellow 25 Amp Natural 10 Amp Red Description Cavity Spare F181 Powertrain Shutdown Air Conditioner Clutch Emissions – Partial Zero Emissions Vehicle Motor Emissions – Partial Zero Emissions Vehicle Actuators Spare Anti Lock Brake Valves Siren – If Equipped Spare Powertrain
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 210 FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow, it can often be moved by a rocking motion. Turn your steering wheel right and left to clear the area around the front wheels. Then shift back and forth between DRIVE/1st and REVERSE.
TOW EYE Your vehicle is equipped with a tow eye that can be used to rescue your vehicle, should it become stranded off road. (fig. 162) Tow eyes are for emergency use only, to rescue a vehicle stranded off road.Do not use tow eyes for tow truck hookup or highway towing.You could damage your vehicle. Tow straps are recommended when towing the vehicle; chains may cause vehicle damage. FRONT TOW EYE USAGE The front tow eye receptacle is located on the lower right side of the front fascia.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES REAR TOW EYE USAGE The rear tow eye receptacle is located behind a door, located on the left rear bumper fascia. To install the tow eye, open the door using the vehicle key or a small screwdriver, and thread the tow eye into the receptacle. Insert the flat end of the jack handle through the eye and tighten, refer to “Jacking and Tire Changing” for further information.
WARNING! You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator or coolant bottle is hot.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 214 • Do not use sling type equipment when towing. Damage to the fascia will occur. • When securing the vehicle to a flatbed truck, do not attach to front or rear suspension components. Damage to your vehicle may result from improper towing. • Do not push or tow this vehicle with another vehicle as damage to the bumper fascia and transmission may result.
SERVICING AND CARE KNOWING YOUR VEHICLE MAINTENANCE SCHEDULE Required Maintenance Intervals Thousands of kilometers 30 60 90 120 150 180 Months 24 48 72 96 120 144 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • SERVICING AND CARE • • • • • • TECHNICAL SPECIFICATIONS • • • • • • • • • • • • • • • • • • Check tire condition/wear and adjust pressure if required.
Thousands of kilometers 30 60 90 120 150 180 Months 24 48 72 96 120 144 Check battery charge status and possibly recharge. • • • • • • Check engine control system operation (via diagnostic socket). • • • • • • KNOWING YOUR VEHICLE SAFETY Visually inspect the condition of the auxiliary drive belt. STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY • Replace auxiliary drive belts. • Check timing belt conditions.
Regular Checks Every 1,000 km or before long journeys, check and top up the following if necessary: • engine coolant fluid, brake fluid, windshield washer fluid and power steering fluid; • tire pressure and condition; • operation of lighting system (headlights, direction indicators, hazard lights, etc.); • operation of the windshield wiper/washer system, position and wear of windshield/rear window wiper blades; • Check and add, if required, the engine oil level every 3,000 km.
KNOWING YOUR VEHICLE ENGINE COMPARTMENT — 2.0L DIESEL (fig. 165) SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS (fig.
MAINTENANCE PROCEDURES ENGINE OIL The pages that follow contain the required maintenance services determined by the engineers who designed your vehicle. Checking Oil Level – 2.0L Diesel Engine To assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 220 Disposing of Used Engine Oil And Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can present a problem to the environment.
• It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and identified on the battery case. Cable clamps should be tight on the terminal posts and free of corrosion. • If a “fast charger” is used while the battery is in the vehicle,disconnect both vehicle battery cables before connecting the charger to the battery.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES WARNING! Do not remove the A/C air filter while the blower is operating or personal injury may result. The A/C air filter is located in the fresh air inlet behind the glove box. Perform the following steps to replace the filter: 1. Open the glove box and remove all contents. 2.
7. Reinstall the glove box door. Make sure that the hinges are seated fully as you raise the door. Otherwise, the door latch will not align properly. BODY LUBRICATION Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate, tailgate, sliding doors and hood hinges, should be lubricated periodically with a lithium based grease to assure quiet, easy operation and to protect against rust and wear.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY Rear Wiper Removal/Installation – If Equipped 1. Lift the pivot cap on the rear wiper arm upward, this will allow the rear wiper blade to be raised off of the liftgate glass. (fig. 168) NOTE: The rear wiper arm cannot be raised fully upward unless the pivot cap is raised first. 2. Lift the rear wiper arm upward to raise the wiper blade off of the liftgate glass. 3.
rating information can be found on most washer fluid containers. The fluid reservoir will hold nearly 4 Liters of washer fluid when the message “LoWASH” appears in the instrument cluster. WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. EXHAUST SYSTEM The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS To minimize the possibility of catalyst damage: • Do not shut OFF the engine or interrupt the ignition when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. • Do not idle the engine with any ignition coil connectors disconnected for prolonged periods.
(Continued) • Do not use plain water alone or alcohol base engine coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not be compatible with the radiator engine coolant and may plug the radiator. • This vehicle has not been designed for use with Propylene Glycol based coolants. Use of Propylene Glycol based coolants is not recommended. Adding Coolant – 2.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY Coolant Level The radiator normally remains completely full, so there is no need to remove the radiator cap unless checking for coolant freeze point or replacing coolant. Advise your service attendant of this. As long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month.
Clean the top of the master cylinder area before removing the cap. If necessary, add fluid to bring the fluid level up to the requirements described on the brake fluid reservoir. Overfilling of fluid is not recommended because it may cause leaking in the system. Fluid level can be expected to fall as the brake pads wear. Brake fluid level should be checked when pads are replaced. However, low fluid level may be caused by a leak and a checkup may be needed. Use only manufacturer's recommended brake fluid.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 230 Check the fluid level by removing the fill plug. The fluid level should be between the bottom of the fill hole and a point not more that 4.7 mm below the bottom of the hole. Lubricant Selection Use only manufacturers recommended transmission fluid. Do not add any materials (other than leak detection dyes).
• It is important that the drain holes in the lower edges of the doors, rocker panels, and cargo area be kept clear and open. • If you detect any stone chips or scratches in the paint, touch them up immediately. The cost of such repairs is considered the responsibility of the owner. • If your vehicle is damaged due to an accident or similar cause, which destroys the paint and protective coating, have your vehicle repaired as soon as possible.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING leather upholstery with any liquid. Please do not use polishes, oils, cleaning fluids, solvents, detergents, or ammonia-based cleaners to clean your leather upholstery. Application of a leather conditioner is not required to maintain the original condition. electric defroster. Do not use scrapers or other sharp instruments that may scratch the elements. WARNING! Do not use volatile solvents for cleaning purposes.
TIRE ROTATION RECOMMENDATIONS Tires on the front and rear axles of vehicles operate at different loads and perform different steering, driving, and braking functions. For these reasons, they wear at unequal rates. These effects can be reduced by timely rotation of tires. The benefits of rotation are especially worthwhile with aggressive tread designs such as those on all season type tires.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING TECHNICAL SPECIFICATIONS VEHICLE IDENTIFICATION NUMBER The Vehicle Identification Number (VIN) is on the left front corner of the instrument panel and is visible from outside of the vehicle through the windshield. This number also appears stamped on the right front door sill under the sill moulding and printed on the Automobile Information Disclosure Label affixed to a window on your vehicle, the vehicle registration and title. (fig. 170) (fig.
TIRES — GENERAL INFORMATION TIRE PRESSURE Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle. Three primary areas are affected by improper tire pressure: Safety WARNING! • Improperly inflated tires are dangerous and can cause collisions. • Under-inflation increases tire flexing and can result over-heating and in tire failure. • Over-inflation reduces a tire's ability to cushion shock.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY Inflation pressures specified on the placard are always “cold tire inflation pressure.” Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1.6 km after a three hour period. The cold tire inflation pressure must not exceed the maximum inflation pressure molded into the tire sidewall.
vehicle. This spare tire may be used in the tire rotation for your vehicle. If your vehicle has this option refer to an authorized tire dealer for the recommended tire rotation pattern. If your vehicle is not equipped with an original equipment tire and wheel as a spare, a non-matching temporary emergency use spare may be equipped with your vehicle. Temporary use spares are engineered to be used only with your vehicle.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 238 LIMITED-USE SPARE – IF EQUIPPED The limited-use spare tire is for temporary emergency use only. This tire is identified by a label located on the limited-use spare wheel. This label contains the driving limitations for this spare. This tire may look like the original equipped tire on the front or rear axle of your vehicle, but it is not.
WARNING! Tires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure.You could lose control and have a collision resulting in serious injury or death. Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease, and gasoline. REPLACEMENT TIRES The tires on your new vehicle provide a balance of many characteristics.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 240 WARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering,handling,and braking of your vehicle.
FLUID CAPACITIES Fuel (Approximate) Engine Oil with Filter 2.0L Diesel Engine Cooling System * 2.0L Diesel Engine and Single- or Dual-Zone Climate Control System 2.0L Diesel Engine and Three-Zone Climate Control System * Includes heater and coolant recovery bottle filled to MAX level. Metric 77.6 Liters KNOWING YOUR VEHICLE 5.2 Liters SAFETY 7.5 Liters 9.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 242 FLUIDS, LUBRICANTS, AND GENUINE PARTS ENGINE Component Engine Coolant – 2.0L Diesel Engine Engine Oil – 2.0L Diesel Engine Fuel Selection – 2.0L Diesel Engine Fuel Additive – 2.0L Diesel Engine Fluids, Lubricants, and Genuine Parts Exceeds CUNA NC 956-16, ASTM D 3306 specifications. Qualification FIAT 9.
CHASSIS Component Manual Transmission Wheel-Side Constant Velocity Joints Differential-Side Constant Velocity Joints Brake/Clutch Master Cylinder Power Steering Reservoir Windshield/Rear Window Washer Fluid Fluid, Lubricant, or Genuine Part Grade SAE 75W synthetic lubricant that meets Qualification FIAT 9.55550-MZ6 (TUTELA TRANSMISSION GEARFORCE Contractual Technical Reference No. F002.F10). Molybdenum disulphide grease, for use at high temperatures. FIAT 9.55580 certification. NL.GI.
ARRANGEMENTS FOR DEALING WITH THE VEHICLE AT THE END OF ITS LIFE FIAT has been committed for many years to safeguarding the environment through the constant improvement of its production processes and manufacturing products that are increasingly “eco-compatible”.
245
246
CONTENTS About Your Brakes . . . . . . . . . . . . . . . . . . . . 105,169 ABS (Anti-Lock Brake System) . . . . . . . . . . . . . 106,189 Adding Engine Coolant (Antifreeze) . . . . . . . . . . . . 227 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . . 224 Air Cleaner, Engine (Engine Air Cleaner Filter) . . . . . 220 Air Conditioner Maintenance . . . . . . . . . . . . . . . . 221 Air Conditioning Filter . . . . . . . . . . .
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 248 Camera, Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 Capacities, Fluid . . . . . . . . . . . . . . . . . . . . . . . . . 241 Caps, Filler Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Oil (Engine) . . . . . . . . . . . . . . . . . . . . . . . 218,219 Power Steering . . . . . . . . . . . . . . . . . . . . . . .
Dimmer Switch, Headlight . . . . . . . . . . . . . . . . . . . 68 Dipsticks Oil (Engine) . . . . . . . . . . . . . . . . . . . . . . . . . . 219 Power Steering . . . . . . . . . . . . . . . . . . . . . . . . 113 Disabled Vehicle Towing . . . . . . . . . . . . . . . . . . . . 213 Disposal Antifreeze (Engine Coolant) . . . . . . . . . . . . . . . 227 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 250 Air Conditioning . . . . . . . . . . . . . . . . . . . . . 65,221 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Engine Oil Disposal . . . . . . . . . . . . . . . . . . . . . 220 Flash-To-Pass . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Flashers Hazard Warning . . . . . . . . . . . . . . . . . . . . . . . .
On With Wipers . . . . . . . . . . . . . . . . . . . . . . . 66 Passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Time Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Heated Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Heated Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 High Beam Indicator . . .
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 252 Daytime Running . . . . . . . . . . . . . . . . . . . . . . . . 67 Dimmer Switch, Headlight . . . . . . . . . . . . . . . . . 68 Electronic Stability Program (ESP) Indicator . . . . . 110 Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 Fog . . . . . . . . . . . . . . . . . . . . . . . . . . . 67,186,201 Fuses . . . . . . . . . . . .
Mini-Trip Computer . . . . . . . . . . . . . . . . . . . . . . . 23 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53,77 Automatic Dimming . . . . . . . . . . . . . . . . . . . . . 54 Electric Powered . . . . . . . . . . . . . . . . . . . . . . . . 54 Electric Remote . . . . . . . . . . . . . . . . . . . . . . . . 54 Exterior Folding . . . . . . . . . . . . . . . . . . . . . . . . 55 Heated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Outside . . . . . . . . . . . . .
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 254 Radiator Cap (Coolant Pressure Cap) . . . . . . . . . . . 227 Radio (Sound Systems) . . . . . . . . . . . . . . . . . . . . . 126 Radio Operation . . . . . . . . . . . . . . . . . . . . . . . . . 130 Radio Remote Controls . . . . . . . . . . . . . . . . . . . . 127 Rear Air Conditioning . . . . . . . . . . . . . . . . . . . . . . 62 Rear Camera . . . . .
Selection of Coolant (Antifreeze) . . . . . . . . . . . 226,242 Sentry Key (Immobilizer) . . . . . . . . . . . . . . . . . . . . 10 Sentry Key Programming . . . . . . . . . . . . . . . . . . . . 11 Sentry Key Replacement . . . . . . . . . . . . . . . . . . . . 11 Service Engine Soon Light (Malfunction Indicator) . . . 185 Shoulder Belt Upper Anchorage . . . . . . . . . . . . . . 136 Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Side Airbag . . . . . . . . . . . . . . . . . . . . . .
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 256 Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235 Spare Tire . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . .
Windshield Washers . . . . . . . . . . . . . . . . . . . . . 70,72 Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Windshield Wiper Blades . . . . . . . . . . . . . . . . . . . 223 Windshield Wipers . . . . . . . . . . . . . . . . . . . . . . . . 70 Wiper Blade Replacement . . . . . . . . . . . . . . . . . . 223 Wiper, Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Wiper, Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Wipers, Intermittent . . . .
258
WHY CHOOSE GENUINE PARTS As we have conceived, designed and built your vehicle, we really know every little detail and component inside out. At our authorized dealerships, you will find technicians personally trained by us who can offer you quality and professional service for all types of servicing and maintenance. They are always on hand for periodic maintenance, seasonal services and for practical expert advice.
F I A T F R E E M O N ENGLISH The data contained in this publication is intended merely as a guide. FIAT reserves the right to modify the models and versions described in this booklet at any time for technical and commercial reasons. If you have any further questions please consult your FIAT dealer. Printed in recycled paper without chlorine.