F I A T F R E E M O N ENGLISH The data contained in this publication is intended merely as a guide. FIAT reserves the right to modify the models and versions described in this booklet at any time for technical and commercial reasons. If you have any further questions please consult your FIAT dealer. Printed in recycled paper without chlorine.
WHY CHOOSING GENUINE PARTS We really know your car because we invented, designed and built it: we really know every single detail. At Fiat Service authorised workshops you can find technicians directly trained by us, offering quality and professionalism for all service operations. Fiat workshops are always close to you for the regular servicing operations, season checks and practical recommendations by our experts.
HOW TO RECOGNIZE GENUINE PARTS All our Genuine Parts undergo rigorous testing, both in design and build stages, by specialists who check the use of cutting-edge materials and test their reliability. This guarantees performance and safety in the long term for both you and the passengers in your automobile. Always insist on a Genuine Part and check that it has been used.
Dear Customer, Thank you for choosing Fiat and congratulations on your choice of a Fiat Freemont. We have written this handbook to help you get to know all your car and use it in the best possible way. You should read it right through before taking to the road for the first time. You will find information, tips and important warnings regarding the driving of your car to help you get the most from the technological features of your Fiat.
KNOWING YOUR VEHICLE INTRODUCTION Congratulations on selecting your new FIAT vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. Before you start to drive this vehicle, read this Owner's Manual and all the supplements. Be sure you are familiar with all vehicle controls, particularly those used for braking, steering, and transmission shifting. Learn how your vehicle handles on different road surfaces.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 2 IMPORTANT NOTICE ALL MATERIAL CONTAINED IN THIS PUBLICATION IS BASED ON THE LATEST INFORMATION AVAILABLE AT TIME OF PUBLICATION APPROVAL. THE RIGHT IS RESERVED TO PUBLISH REVISIONS AT ANY TIME.
changes to your vehicle that do not comply with the manufacturers specifications. Original parts and accessories and other products approved by the manufacturer, including qualified advice, are available at your authorized dealer. When it comes to service, remember that your authorized dealer knows your vehicle best, has the factorytrained technicians and genuine parts, and is interested in your satisfaction. Copyright © 2011 FIAT Group Automobiles S.p.A.
KNOWING YOUR VEHICLE SAFETY HOW TO USE THIS MANUAL Consult the Table of Contents to determine which section contains the information you desire. Since the specification of your vehicle depends on the items of equipment ordered, certain descriptions and illustrations may differ from your vehicle's equipment. STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS (fig.
VEHICLE MODIFICATIONS/ ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a accident resulting in serious injury or death.
KNOWING YOUR VEHICLE INSTRUMENT PANEL FEATURES (fig. 2) SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE (fig.
INSTRUMENTS (fig. 3) 1. Tachometer This gauge measures engine revolutions per minute (RPM x 1000). Before the pointer reaches the red area, ease up on the accelerator to prevent engine damage. 2. Speedometer Shows the vehicle speed. 3. Fuel Gauge The fuel gauge shows the level of fuel in the tank when ignition switch is in the ON/RUN position. 4. Coolant Temperature Gauge The temperature gauge indicates engine coolant temperature.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 8 The gauge pointer will likely indicate a high temperature when driving in hot weather, up mountain grades, in heavy traffic, or when towing a trailer. If the pointer rises to the “H” mark, safely pull over and stop the vehicle. If the Air Conditioning A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the vehicle.
KEY FOB The Key Fob also contains the Remote Keyless Entry (RKE) transmitter and an emergency key, which stores in the rear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the Key Fob go dead. The emergency key is also for locking the glove box. You can keep the emergency key with you when valet parking.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 10 door will cancel this feature. The time for this feature is programmable. Refer to “Uconnect Touch™ Settings” in “Knowing Your Vehicle” for further information. WARNING! • Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, and remove the key fob from the ignition. When leaving the vehicle, always lock your vehicle.
SENTRY KEY® The Sentry Key® Immobilizer system prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked. The system uses a Key Fob with Remote Keyless Entry (RKE) transmitter, a Keyless Ignition Node (KIN) and a RF receiver to prevent unauthorized vehicle operation. Therefore, only Key Fobs that are programmed to the vehicle can be used to start and operate the vehicle.
KNOWING YOUR VEHICLE NOTE: When having the Sentry Key® Immobilizer system serviced, bring all vehicle Key Fobs with you to the authorized dealer. SAFETY CUSTOMER KEY PROGRAMMING Programming Key Fobs or RKE transmitters may be performed at an authorized dealer.
If the vehicle is equipped with Passive Entry, refer to “Keyless Enter-N-Go (for versions/markets, where provided)” under “Knowing Your Vehicle” for further information. TO LOCK THE DOORS AND LIFTGATE Press and release the LOCK button on the RKE transmitter to lock all doors and liftgate. The turn signal lights will flash to acknowledge the signal.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY 1. Remove the emergency key by sliding the mechanical latch on the back of the RKE transmitter sideways with your thumb and then pull the key out with your other hand. 2. Insert the tip of the emergency key or a #2 flat blade screwdriver into the slot and gently pry the two halves of the RKE transmitter apart. Make sure not to damage the seal during removal. (fig. 7) 3.
VEHICLE SECURITY ALARM (for versions/markets, where provided) The Vehicle Security Alarm (VSA) system monitors the vehicle doors, hood, and liftgate for unauthorized entry and the ignition switch for unauthorized operation. If something triggers the alarm, the system will prevent the vehicle from starting, sound the horn intermittently, flash the headlights and taillights, and flash the Vehicle Security Light in the instrument cluster.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 16 NOTE: • The driver's door key cylinder and the liftgate button on the RKE transmitter cannot arm or disarm the Vehicle Security Alarm. • The Vehicle Security Alarm remains armed during power liftgate entry. Pressing the liftgate button will not disarm the Vehicle Security Alarm.
• For vehicles equipped with Keyless Enter-N-Go, make sure the vehicle ignition system is "OFF". • For vehicles not equipped with Keyless Enter-N-Go, make sure the vehicle ignition system is "OFF" and the key is physically removed from the ignition. 2. Perform one of the following methods to lock the vehicle: • Press LOCK on the interior power door lock switch with the driver and/or passenger door open.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 18 SECURITY SYSTEM MANUAL OVERRIDE The system will not arm if you lock the doors using the manual door lock plunger. STEERING WHEEL LOCK (for versions/markets, where provided) Your vehicle may be equipped with a passive electronic steering wheel lock. This lock prevents steering the vehicle without the ignition key.
ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) The Electronic Vehicle Information Center (EVIC) features a driver-interactive display that is located in the instrument cluster. (fig. 8) This system allows the driver to select a variety of useful information by pressing the switches mounted on the steering wheel.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 20 DOWN Button Press and release the DOWN button to scroll downward through the main menus and sub-menus. SELECT Button Press and release the SELECT button for access to main menus or sub-menus. Press and hold the SELECT button for two seconds to reset features. BACK Button Press the BACK button to scroll back to a previous menu or sub-menu.
• Exhaust System — Regeneration Required Now. Under conditions of exclusive short duration and low speed driving and low speed driving cycles, the engine and exhaust after-treatment system may never reach the conditions required to remove the trapped PM. If this occurs the “Exhaust System Regeneration Required Now” message will be displayed on the EVIC.
KNOWING YOUR VEHICLE • Windshield Washer Fluid Low Indicator This light will turn on to indicate the windshield washer fluid is low. SAFETY EVIC RED TELLTALE LIGHTS This area will show reconfigurable red telltales. These telltales include: STARTING AND DRIVING • Door Ajar This light will turn on to indicate that one or more doors may be ajar.
Further overheating will cause the temperature gauge to pass H, the indicator will continuously flash and a continuous chime will occur until the engine is allowed to cool. If the light turns on while driving, safely pull over and stop the vehicle. If the A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the vehicle. If the temperature reading does not return to normal, turn the engine off immediately and call for service.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY • Average Fuel Economy • Distance To Empty (DTE) • 100L/Km Average Fuel Economy Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will read “RESET” or show dashes for two seconds. Then, the history information will be erased, and the averaging will continue from the last fuel average reading before the reset. (fig.
TRIP INFO Press and release the UP or DOWN button until “Trip Info” displays highlighted in the EVIC and press the SELECT button. Pressing the SELECT button with "Trip Info" highlighted will cause the EVIC display to show Trip A, Trip B, and Elapsed Time all in one display. If you want to reset one of the three functions you use the UP or DOWN buttons to highlight (select) the feature that you want to reset. Pressing the SELECT button will cause the selected feature to reset individually.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 26 MESSAGES In the Main Menu, press and release the UP or DOWN button until “Messages: XX” displays highlighted in the EVIC. If there is more than one message, pressing the SELECT button will display a stored warning message. Press and release the UP and DOWN buttons if there is more than one message to step through the remaining stored messages.
shown on the following pages for each setting (fig. 11) (fig. 12) (fig. 11) 1 — Uconnect Touch™ 4.3 Settings Hard-Key Display • Brightness (for versions/markets, where provided) Press the Brightness soft-key to change this display. When in this display you may select display brightness with the headlights on and the headlights off. Adjust the brightness with the + and – setting soft-keys or by selecting any point on the scale in between the + and – soft-keys followed by pressing the arrow back soft-key.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 28 • Units (for versions/markets, where provided) Press the Units soft-key to change this display. When in this display you may select to have the EVIC, odometer, and navigation system (for versions/markets, where provided) changed between US and Metric units of measure. Press US or Metric followed by pressing the arrow back soft-key.
and Display button followed by pressing the arrow back soft-key. the 0, 30, 60 or 90 soft-key followed by pressing the arrow back soft-key. • Hill Start Assist (for versions/markets, where provided) Press the Hill Start Assist soft-key to change this display. When this feature is selected, the Hill Start Assist (HSA) system is active. Refer to “Electronic Brake Control System” in “Starting And Driving” for system function and operating information.
KNOWING YOUR VEHICLE selection, press the Flash Headlights with Lock softkey, select On or Off followed by pressing the arrow back soft-key. Doors & Locks SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 30 • Auto Unlock on Exit (for versions/markets, where provided) Press the Auto Unlock on Exit soft-key to change this display.
Heated Seats • Auto Heated Seats (for versions/markets, where provided) Press the Auto Heated Seats soft-key to change this display. When this feature is selected the driver's heated seat will automatically turn on when temperatures are below 4.4° C. To make your selection, press the Auto Heated Seats soft-key, select On or Off followed by pressing the arrow back soft-key.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING • Calibration (for versions/markets, where provided) Press the Calibration key to change this setting. This compass is self-calibrating, which eliminates the need to manually reset the compass. When the vehicle is new, the compass may appear erratic and the EVIC will display CAL until the compass is calibrated.
Audio • Equalizer (for versions/markets, where provided) Press the Equalizer soft-key to change this display. When in this display you may adjust the Bass, Mid and Treble settings. Adjust the settings with the + and – setting soft-keys or by selecting any point on the scale in between the + and – soft-keys followed by pressing the arrow back soft-key. NOTE: Bass/mid/treble allow the you to simply slide your finger up/down to change the setting as well as press directly on the desired setting.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES release the Day, Night or Auto soft-key followed by pressing the arrow back soft-key. selecting any point on the scale in between the + and – soft-keys followed by pressing the arrow back soft-key. • Display Brightness with Headlights ON (for versions/markets, where provided) When in this display you may select display brightness with the headlights on and the headlights off.
• Touchscreen Beep (for versions/markets, where provided) When in this display you may turn on or shut off the sound heard when a touch screen button (soft-key) is pressed. To change the Touch Screen Beep setting press and release the On or Off soft-key followed by pressing the arrow back soft-key.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 36 and Display, or turned OFF. To change the Park Assist status press and release the Off, Sound Only or Sounds and Display button followed by pressing the arrow back soft-key.
• Auto Dim High Beams (for versions/markets, where provided) When this feature is selected, the high beam headlights will deactivate automatically under certain conditions. To make your selection, press the Auto High Beams soft-key, select ON or OFF followed by pressing the arrow back soft-key. Refer to “Lights/SmartBeam™ (for versions/markets, where provided)” in “Knowing Your Vehicle” for further information.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 38 only result in the driver’s door opening. If driver door first is selected, once the driver door is opened, the interior door lock/unlock switch can be used to unlock all doors (or use RKE transmitter).
• Perform Compass Calibration (for versions/markets, where provided) Press the Calibration key to change this setting. This compass is self-calibrating, which eliminates the need to manually reset the compass. When the vehicle is new, the compass may appear erratic and the EVIC will display CAL until the compass is calibrated.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE • Equalizer (for versions/markets, where provided) When in this display you may adjust the Bass, Mid and Treble settings. Adjust the settings with the + and – setting soft-keys or by selecting any point on the scale in between the + and – soft-keys followed by pressing the arrow back soft-key.
Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the seat switch; the seat will move in the direction of the switch. Release the switch when the desired position is reached. Tilting The Seat Up Or Down The angle of the seat cushion can be adjusted in four directions. Pull upward or push downward on the front or rear of the seat switch; the front or rear of the seat cushion will move in the direction of the switch.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING HEATED SEATS (for versions/markets, where provided) On some models, the front driver and passenger seats may be equipped with heaters in both the seat cushions and seatbacks. The heated seats are operated using the Uconnect Touch™ System. For Vehicles Equipped With Uconnect Touch™ 4.3: Touch the CLIMATE hard-key (located on the left side of the Uconnect Touch™ display) to enter the climate control screen.
When the HI-level setting is selected, the heater will provide a boosted heat level during the first four minutes of operation. Then, the heat output will drop to the normal HI-level. If the HI-level setting is selected, the system will automatically switch to LO-level after a maximum of 60 minutes of continuous operation. At that time, the display will change from HI to LO, indicating the change. The LO-level setting will turn OFF automatically after a maximum of 45 minutes.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt. RECLINER ADJUSTMENT The recline lever is located on the outboard side of the seat.
WARNING! • Adjusting a seat while the vehicle is moving is dangerous.The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust the seat only while the vehicle is parked. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS WARNING! Adjusting a seat while the vehicle is moving is dangerous.The sudden movement of the seat could cause you to lose control.Adjust any seat only while the vehicle is parked. HEAD RESTRAINTS Head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear impact.
For comfort, the Active Head Restraints can be tilted forward and backward. To tilt the head restraint closer to the back of your head, pull forward on the bottom of the head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head. (fig. 25) (fig. 26) NOTE: • The head restraints should only be removed by qualified technicians, for service purposes only. If either of the head restraints require removal, see your authorized dealer.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY (Continued) • Active Head Restraints may be deployed if they are struck by an object such as a hand, foot or loose cargo. To avoid accidental deployment of the Active Head Restraint ensure that all cargo is secured, as loose cargo could contact the Active Head Restraint during sudden stops. Failure to follow this warning could cause personal injury if the Active Head Restraint is deployed.
WARNING! Do not allow a passenger to sit in a third row seat without having the head restraint unfolded and locked in place. Failure to follow this warning may result in personal injury to the passenger in the event of a collision. 60/40 SPLIT SECOND-ROW PASSENGER SEATS To provide additional storage area, each second-row passenger seat can be folded flat. This allows for extended cargo space and still maintains some seating room if needed.
KNOWING YOUR VEHICLE SAFETY WARNING! To prevent personal injury or damage to objects, keep your head, arms, and objects out of the folding path of the seatback. 4. Gently guide the seatback into the folded position. STARTING AND DRIVING WARNING! Be certain that the seatback is locked securely into position. Otherwise, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.
Recliner Adjustment The recline lever is on the outboard side of the seat. To recline the seatback, lean back, lift the lever, position the seatback as desired, and then release the lever. To return the seatback to its normal upright position, lean back, lift the lever, lean forward, and then release the lever once the seatback is in the upright position. (fig. 30) WARNING! • Adjusting a seat while the vehicle is moving is dangerous.The sudden movement of the seat could cause you to lose control.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING Seatback/Armrest — Second Row Passenger Seat The latch release-loop is located at the top of the seatback/armrest. Pull the release-loop forward to release the latch and then downward to lower the seatback/armrest. (fig. 31) Raise the seatback/armrest and lock it in place when not in use, or when additional seating area is required. WARNING! Keep the latch clean and free of objects and be certain that the seatback/ armrest is locked securely into position.
WARNING! Do not drive the vehicle with the seat in this position, as it is only intended for entering and exiting the third row seats. Failure to follow this warning may result in personal injury. (fig. 32) Tip 'n Slide™ Control Lever To Unfold And Move The Second-Row Passenger Seat Rearward 1. Move the seatback rearward until it locks in place and then continue sliding the seat rearward on its tracks until it locks in place. 2. Push the seat cushion downward to lock it in place. 3.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 50/50 SPLIT THIRD-ROW PASSENGER SEATS WITH FOLD-FLAT FEATURE (Seven Passenger Models) To provide additional storage area, each third-row passenger seatback can be folded flat. This allows for extended cargo space and still maintains some rear seating room if needed.
WARNING! • Be certain that the seatback is locked securely into position. Otherwise, the seat will not provide the proper stability for passengers. An improperly latched seat could cause serious injury. • Do not allow a passenger to sit in a third row seat without having the head restraint unfolded and locked in place. Failure to follow this warning may result in personal injury to the passenger in the event of a collision.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driving with the steering column unlocked could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your vehicle. Failure to follow this warning may result in serious injury or death. MIRRORS INSIDE DAY/NIGHT MIRROR A single ball joint mirror is provided in the vehicle.
AUTOMATIC DIMMING MIRROR (for versions/markets, where provided) This mirror automatically adjusts for headlight glare from vehicles behind you. This feature will be defaulted on, and only be disabled when the vehicle is moving in reverse. (fig. 38) To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES Models With Express Window Feature Press and release the mirror select button marked L (left) or R (right) and then press one of the four arrow buttons to move the mirror in the direction the arrow is pointing. The selection times out after 30 seconds of inactivity in order to guard against accidentally changing a mirror position following an adjustment.
Sun Visor “Slide-On Rod” Feature (for versions/markets, where provided) This feature allows for additional flexibility in positioning the visor to block out the sun. 1. Fold down the sun visor. 2. Unclip the visor from the center clip. 3. Pull the sun visor toward the inside rearview mirror to extend it. CLIMATE CONTROLS GENERAL OVERVIEW The air conditioning and heating system is designed to make you comfortable in all types of weather.
Soft-Keys Soft-keys are accessible on the Uconnect Touch™ system screen. (fig. 44) (fig. 45) KNOWING YOUR VEHICLE Button Descriptions (Applies To Both Hard-keys And Soft-keys) SAFETY 1. A/C Button Press and release to change the current Air Conditioning (A/C) setting; the indicator illuminates when A/C is ON. For versions/markets, where provided with ATC, performing this function will cause the automatic operation to switch into manual mode and the AUTO indicator will turn off.
3. Blower Control Blower control is used to regulate the amount of air forced through the climate system. There are seven blower speeds available. Adjusting the blower will cause automatic mode to switch to manual operation for versions/markets, where provided with ATC. The speeds can be selected using either hard-keys or softkeys as follows: (fig. 44) Uconnect Touch™ System 4.3 Manual Temperature Controls — Soft-Keys (fig. 45) Uconnect Touch™ System 8.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY 4. Front Defrost Button Press and release to change the current airflow setting to Defrost mode. The indicator illuminates when this feature is ON. Performing this function will cause the ATC (for versions/markets, where provided) to switch into manual mode. The blower speed may increase when Defrost mode is selected. If the front defrost mode is turned off, the climate system will return the previous setting. 5.
8. Climate Control OFF Button Press and release this button to turn the Climate Control ON/OFF. 9. AUTO Operation Button (for versions/markets, where provided) Automatically controls the interior cabin temperature by adjusting airflow distribution and amount. Performing this function will cause the ATC to switch between manual mode and automatic modes. Refer to “Automatic Operation” for more information. 10. Driver Temperature Control Down Button Provides the driver with independent temperature control.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 64 • Defrost Mode Air comes from the windshield and side window demist outlets. Use Defrost mode with maximum temperature settings for best windshield and side window defrosting and defogging. When the Defrost mode is selected, the blower level may increase. 13. SYNC Press the Sync soft-key to toggle the Sync feature On/Off.
NOTE: In cold weather, use of Recirculation mode may lead to excessive window fogging. The Recirculation mode is not allowed in Mix, Floor and Defrost modes to improve window clearing operation. Recirculation will be disabled automatically if these modes are selected. Attempting to use Recirculation while in these modes will cause the LED in the control button to blink and then turn off. AUTOMATIC TEMPERATURE CONTROL (ATC) ATC Hard-keys are located in the center of the instrument panel.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING REAR AUTOMATIC TEMPERATURE CONTROL (ATC) (for versions/markets, where provided) The rear ATC system has floor air outlets at the rear right side of the 3rd Row seats and overhead outlets at each outboard rear seating position. The system provides heated air through the floor outlets or cool, dehumidified air through the headliner outlets. The rear system temperature control is in the Uconnect Touch™ system, located on the instrument panel. (fig. 46) (fig.
The rear ATC is located in the headliner, near the center of the vehicle. (fig. 48) • Press the Rear Temperature Lock button on the Uconnect Touch™ screen. This turns off the Rear Temperature Lock icon in the rear temperature knob. • Rotate the Rear Blower, Rear Temperature and the Rear Mode Control knobs to suit your comfort needs. • ATC is selected by adjusting the rear blower knob counterclockwise to AUTO.
KNOWING YOUR VEHICLE SAFETY temperature. The rear temperature settings are displayed in the Uconnect Touch™ system. When rear controls are locked by the Uconnect Touch™ system , the Rear Temperature Lock symbol on the temperature knob is illuminated and any rear overhead adjustments are ignored.
Window Fogging Interior fogging on the windshield can be quickly removed by turning the mode selector to Defrost. The Defrost/Floor mode can be used to maintain a clear windshield and provide sufficient heating. If side window fogging becomes a problem, increase the blower speed. Vehicle windows tend to fog on the inside in mild but rainy or humid weather. NOTE: Recirculation mode without A/C should not be used for long periods, as fogging may occur.
KNOWING YOUR VEHICLE Manual Control Setting Suggestions For Various Weather Conditions (fig. 49) SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS (fig.
LIGHTS HEADLIGHT SWITCH The headlight switch is located on the left side of the instrument panel. This switch controls the operation of the headlights, parking lights, instrument panel lights, instrument panel light dimming, interior lights and fog lights. (fig. 50) Rotate the headlight switch clockwise to the first detent for parking light and instrument panel light operation. Rotate the headlight switch to the second detent for headlight, parking light and instrument panel light operation.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS HEADLIGHT TIME DELAY This feature provides the safety of headlight illumination for up to 90 seconds when leaving your vehicle in an unlit area. NOTE: The Daytime Running Lights can be turned on and off using the Uconnect Touch™ System, refer to “Uconnect Touch™ Settings” in “Knowing Your Vehicle” for further information.
the headlight switch once and the front fog lights come on. Press the switch a second time and the rear fog lights will come on (front fog lights stay on). Press the switch a third time and the rear fog lights turn off (front fog stays on). Press the switch a fourth times and the front fog turns off. For vehicles without front fog, rear fog will activate on the first press. An indicator light in the instrument cluster illuminates when the fog lights are turned on.
KNOWING YOUR VEHICLE DIMMER CONTROLS The dimmer control is part of the headlight switch and is located on the left side of the instrument panel. (fig. 52) INTERIOR LIGHT DEFEAT (OFF) Rotate the dimmer control to the extreme bottom off position. The interior lights will remain off when the doors are open. SAFETY Rotating the left dimmer control upward with the parking lights or headlights on will increase the brightness of the instrument panel lights.
2 All seating positions occupied, plus an evenly distributed load in the luggage compartment. The total weight of passengers and load does not exceed the maximum load capacity of the vehicle. Driver, plus an evenly distributed load in the luggage compartment. The total weight of the driver and load does not exceed the maximum load capacity of the vehicle. Calculations based on a passenger weight of 75 kg. MAP/READING LIGHTS Refer to “Overhead Console” for further information on Map/Reading Lights.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY WINDSHIELD WIPERS AND WASHERS The windshield wiper/washer control lever is located on the left side of the steering column. (fig. 53) The front wipers are operated by rotating a switch, located at the end of the lever. Refer to “Rear Window Features” for further information on using the rear window wiper/washer.
Rotate the end of the lever upward to the second detent past the intermittent settings for high-speed wiper operation. (fig. 55) NOTE: The wipers will automatically return to the “park” position if you turn OFF the ignition switch while they are operating. The wipers will resume operation when you turn the ignition switch back to the ON position. • Turn the windshield wipers OFF when driving through an automatic car wash.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 78 If you activate the washer while the wiper control is in the OFF position, the wipers will operate for two or three wipe cycles and then turn OFF. WARNING! Sudden loss of visibility through the windshield could lead to a collision.You might not see other vehicles or other obstacles.
REAR WINDOW FEATURES REAR WINDOW WIPER/WASHER The rear window wiper/washer control is located on the right side of the steering column. (fig. 56) If the rear wiper is operating when the ignition is turned to the LOCK position, the wiper will automatically return to the “Park” position. When the vehicle is restarted, the wiper will resume function at whichever position the switch is set at. Rotate the switch upward to the first detent position for rear wiper operation.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 80 • Turn the rear wiper off when driving through an automatic car wash. Damage to the rear wiper may result if the rear wiper switch is left in the on position. • In cold weather, always turn off the rear wiper switch and allow the rear wiper to return to the park position before turning off the engine.
ELECTRONIC SPEED CONTROL (for versions/markets, where provided) When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 40 km/h. The Electronic Speed Control buttons are located on the right side of the steering wheel. (fig. 58) NOTE: In order to ensure proper operation, the Electronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at the same time.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 82 vehicle will deactivate Electronic Speed Control without erasing the set speed memory. Pressing the ON/ OFF button or turning the ignition switch OFF erases the set speed memory. TO ACCELERATE FOR PASSING Press the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed.
OVERHEAD CONSOLE The overhead console contains courtesy/reading lights, storage for sunglasses, an interior observation mirror and an optional power sunroof switch. (fig. 59) COURTESY/READING LIGHTS The overhead console has two courtesy lights. The lights turn on when a front door, a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry (RKE) the lights will also turn on when the UNLOCK button on the RKE transmitter is pressed.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES SUNGLASSES STORAGE To access the storage compartment, press on the raised bars on the compartment door in the center of the console and release and the door will swing downward. (fig. 61) INTERIOR OBSERVATION MIRROR The convex interior observation mirror provides the driver and front seat passenger a wide field of view to conveniently view passengers sitting in the rear passenger seats.
HAZARD WARNING FLASHERS The Hazard Warning flasher switch is located in the instrument panel switch bank, above the climate controls. Press the switch to turn on the Hazard Warning flasher. When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. Press the switch a second time to turn off the Hazard Warning flashers. STORAGE GLOVEBOX STORAGE The glovebox storage compartment is located on the passenger side of the instrument panel.
KNOWING YOUR VEHICLE FLOOR CONSOLE STORAGE An open storage area, or cubby bin, is located in the floor console. (fig. 64) SAFETY CENTER CONSOLE STORAGE There is a storage compartment located under the center console armrest. (fig. 65) STARTING AND DRIVING Pull upward on the release handle, located on the front of the lid, to open the storage compartment. (fig. 66) WARNING LIGHTS AND MESSAGES (fig. 65) Center Console IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS (fig.
Sliding Armrest (for automatic transmission only) The center console armrest can also be slid rearward for easy access to the storage area. (fig. 67) WARNING! Do not operate this vehicle with a console compartment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distraction, resulting in death or injury.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE WARNING! Be certain that the seat cushion is locked securely into position before using the seat. Otherwise, the seat will not provide the proper stability for passengers. An improperly latched seat cushion could cause serious injury. SECOND-ROW PASSENGER SEAT TEMPORARY STORAGE BIN This is a temporary storage bin designed for use when the seatback/armrest is down.
ELECTRICAL POWER OUTLETS A 12 Volt (13 Amp) power outlet located in the center console below the radio. The power outlet has power available when the ignition switch in the ON/RUN or ACC position. (fig. 72) This power outlet will also operate a conventional cigar lighter unit. To preserve the heating element, do not hold the lighter in the heating position. KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES (fig.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES A second 12 Volt (13 Amp) power outlet is located inside the center console storage area. Power is available with the ignition switch in the ON/RUN, ACC or LOCK position. (fig. 73) A third fused 12 Volt power outlet is located on the back of the center console. This power outlet has power available when the ignition switch is in the LOCK, ON or ACC position. (fig.
• Do not exceed the maximum power of 160Watts (13 Amps) at 12Volts.If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. • The power outlet on the bottom of the center console shares the fuse with the power outlet on the back of the console.The combined usage must not exceed 160 Watts (13 Amps) at 12 Volts. • Power outlets are designed for accessory plugs only.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE • Many accessories that can be plugged in draw power from the vehicle's battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle's battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.
When the armrest is folded flat the cupholders are in the back of the Head Restraint. The Head Restraint can be adjusted to better position the cupholders. (fig. 78) For vehicles equipped with third row seating, there are additional cupholders located in the trim panels. WARNING! If containers of hot liquid are placed in the bottle holder, they can spill when the door is closed, burning the occupants. Be careful when closing the doors to avoid injury.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES POWER SUNROOF (for versions/markets, where provided) The power sunroof switch is located between the sun visors on the overhead console. (fig. 80) WARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death.
automatically. This is called “Express Close”. During Express Close operation, any movement of the switch will stop the sunroof. CLOSING SUNROOF — MANUAL MODE To close the sunroof, press and hold the switch in the forward position. Any release of the switch will stop the movement and the sunroof will remain in a partially closed condition until the switch is pushed and held forward again.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IGNITION OFF OPERATION The power sunroof switches remain active for up to approximately ten minutes after the ignition switch has been turned OFF. Opening either front door will cancel this feature. NOTE: The delay time is programmable using the Uconnect Touch™ system. Refer to “Uconnect Touch™ Settings” for further information.
WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors before you drive as well as when you park and leave the vehicle. • When leaving the vehicle, always remove the Key Fob from the vehicle and lock your vehicle. Unsupervised use of vehicle equipment may cause severe personal injuries or death. • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 98 2. The transmission was in gear and the vehicle speed returned to 0 km/h. 3. The transmission is in NEUTRAL or PARK. 4. The driver door is opened. 5. The doors were not previously unlocked. 6. The vehicle speed is 0 km/h. 4. Within 30 seconds, press the power door unlock switch to unlock the doors. 5.
WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged. Failure to follow this warning may result in serious injury or death. NOTE: • After engaging the Child-Protection Door Lock system, always test the door from the inside to make certain it is in the desired position. (fig.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING To Disengage The Child-Protection Door Lock System 1. Open the rear door. 2. Insert the tip of the emergency key (or alike) into the child lock control and rotate it to the UNLOCK position. (fig. 85) 3. Repeat Steps 1 and 2 for the opposite rear door. NOTE: After disengaging the Child-Protection Door Lock system, always test the door from the inside to make certain it is in the desired position.
“Unlock Driver Door 1st Press” and “Unlock All Doors 1st Press”, refer to “Uconnect Touch™ Settings” in “Knowing Your Vehicle” for further information. To Unlock From The Passenger Side: With a valid Passive Entry RKE transmitter within 1.5 m of the passenger door handle, grab the front passenger door handle to unlock all four doors and the liftgate automatically.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES have been closed the vehicle checks the inside and outside of the vehicle for any valid Passive Entry RKE transmitters.
WINDOWS POWER WINDOWS The window controls on the driver's door trim panel control all of the door windows. (fig. 89) There are single window controls on each passenger door trim panel, which operate the passenger door windows. The window controls will operate when the ignition is in the ON/RUN or ACC position. NOTE: For vehicles equipped with the Uconnect Touch™, the power window switches will remain active for up to 10 minutes after the ignition is cycled to the OFF position.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS To close the window part way, pull the window switch up to the first detent and release it when you want the window to stop. NOTE: • If the window runs into any obstacle during Autoclosure, it will reverse direction and then go back down. Remove the obstacle and use the window switch again to close the window.
WIND BUFFETING Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (for versions/markets, where provided) in certain open or partially open positions. This is a normal occurrence and can be minimized. If the buffeting occurs with the rear windows open, then open the front and rear windows together to minimize the buffeting.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING! • Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. These fumes could injure you and your passengers.Keep the liftgate closed when you are operating the vehicle. • If you are required to drive with the liftgate open, make sure that all windows are closed, and the blower switch on the climate control is set at high speed. Do not use the recirculation mode.
To operate the flashlight, press the switch once for high, twice for low, and a third time to return to off. (fig. 93) NOTE: Be sure to return the flashlight to its charging station when not in use to ensure it is ready for operation the next time you need it. CARGO MANAGEMENT SYSTEM FIVE PASSENGER SYSTEM FEATURES • A raised load floor that sits on top of a large built-in storage bin. • A tri-fold door built into the load floor that allows easy access to items in the built-in storage bin.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES CARGO TIE-DOWNS WARNING! Cargo tie-downs are not safe anchors for a child seat tether strap.In a sudden stop or collision, a tie-down could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers. Cargo tie-downs are located on both rear trim panels. These tie-downs should be used to secure loads safely when the vehicle is moving. (fig.
RETRACTABLE CARGO AREA COVER (for versions/markets, where provided) — FIVE PASSENGER MODELS the posts into the bottom of the notches and release the handle. (fig. 96) NOTE: The purpose of this cover is for privacy, not to secure loads. It will not prevent cargo from shifting or protect passengers from loose cargo. SAFETY The removable retractable cargo area cover mounts in the cargo area behind the top of the rear seats.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES WARNING! A cargo cover that is unsecured in the vehicle could cause injury in a collision.It could become airborne during a sudden stop and strike someone inside the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compartment. Remove the cover from the vehicle when taken from its mounting. Do not store it in the vehicle. TO OPEN AND CLOSE THE HOOD Two latches must be released to open the hood. 1.
(fig. 98) Underhood Safety Latch To prevent possible damage: • Before closing hood, make sure the hood prop rod is fully seated into its storage retaining clips. • Do not slam the hood to close it. Use a firm downward push at the center front edge of the hood to ensure that both latches engage. Never drive your vehicle unless the hood is fully closed, with both latches engaged. KNOWING YOUR VEHICLE WARNING! Be sure the hood is fully latched before driving your vehicle.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 112 ROOF LUGGAGE RACK (for versions/markets, where provided) The roof rack side rails on your vehicle are NOT designed to carry a load without the addition of crossbars. Metal Crossbars can be purchased from your FIAT dealer to provide a functional roof rack system. External racks do not increase the total load carrying capacity of the vehicle.
BRAKE SYSTEM Your vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems loses normal capability, the remaining system will still function. However, there will be some loss of overall braking effectiveness. This will be evident by increased pedal travel during application and greater pedal force required to slow or stop the vehicle.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 114 WARNING! The ABS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ABS cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning.
You also may experience the following when the brake system goes into Anti-lock: • The ABS motor running (it may continue to run for a short time after the stop), • The clicking sound of solenoid valves, • Brake pedal pulsations, and • A slight drop or fall away of the brake pedal at the end of the stop. These are all normal characteristics of ABS.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 116 to operate normally if the Brake System Warning Light is not on. If the ABS Light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock brakes. If the ABS Light does not come on when the ignition switch is turned to the ON position, have the light repaired as soon as possible.
ELECTRONIC ROLL MITIGATION (ERM) This system anticipates the potential for wheel lift by monitoring the driver’s steering wheel input and the speed of the vehicle. When ERM determines that the rate of change of the steering wheel angle and vehicle's speed are sufficient to potentially cause wheel lift, it then applies the appropriate brake and may also reduce engine power to lessen the chance that wheel lift will occur. ERM will only intervene during very severe or evasive driving maneuvers.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 118 (Continued) • ESC cannot prevent collisions, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. ESC also cannot prevent collisions resulting from loss of vehicle control due to inappropriate driver input for the conditions. Only a safe, attentive, and skillful driver can prevent collisions.
WARNING! When in “Partial Off ” mode, the TCS functionality of ESC, (except for the limited slip feature described in theTCS section), has been disabled and the “ESC Off Indicator Light” will be illuminated.All other stability features of ESC function normally. When in “Partial Off ” mode, the engine power reduction feature ofTCS is disabled, and the enhanced vehicle stability offered by the ESC system is reduced.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 120 individual wheels in an attempt to stop the trailer from swaying. ONBOARD DIAGNOSTIC SYSTEM — OBD II NOTE: The TSC is disabled when the ESC system is in the “Partial Off” mode. Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II.
LOOSE FUEL FILLER CAP MESSAGE If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, the word “gASCAP” will display in the odometer. If this occurs, tighten the fuel filler cap until a “clicking” sound is heard and press the TRIP ODOMETER button to turn off the message. If the problem persists, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the MIL.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 122 Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible. Damage to the power steering pump may occur. POWER STEERING FLUID CHECK Checking the power steering fluid level at a defined service interval is not required.
TIRE PRESSURE MONITOR SYSTEM (TPMS) The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure. The tire pressure will vary with temperature by about 0.069 BAR for every 6.5°C. This means that when the outside temperature decreases, the tire pressure will decrease. Tire pressure should always be set based on cold inflation tire pressure.
KNOWING YOUR VEHICLE NOTE: • The TPMS is not intended to replace normal tire care and maintenance, or to provide warning of a tire failure or condition. SAFETY • The TPMS should not be used as a tire pressure gauge while adjusting your tire pressure. STARTING AND DRIVING • Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Underinflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability.
exists. The Tire Pressure Monitoring Telltale Light will turn off when the fault condition no longer exists. A system fault can occur due to any of the following: 1. Jamming due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the TPMS sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. Lots of snow or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS PREMIUM SYSTEM (for versions/markets, where provided) The Tire Pressure Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressure levels. Sensors, mounted to each wheel as part of the valve stem, transmit tire pressure readings to the receiver module.
also sound a chime. In addition, the EVIC will display a "CHECK TPM SYSTEM" message for three seconds and then display dashes (- -) in place of the pressure value to indicate which sensor is not being received. (fig. 102) If the ignition switch is cycled, this sequence will repeat, providing the system fault still exists.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 128 three seconds and then display dashes (- -) in place of the pressure value. 5. Once you repair or replace the original road tire and reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically.
PARKSENSE® REAR PARK ASSIST (for versions/markets, where provided) The ParkSense® Rear Park Assist system provides visual and audible indications of the distance between the rear fascia and a detected obstacle when backing up, e.g. during a parking maneuver. Refer to “ParkSense® System Usage Precautions” for limitations of this system and recommendations. ParkSense® will retain the last system state (enabled or disabled) from the last ignition cycle when the ignition is changed to the ON/RUN position.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING PARKSENSE® DISPLAY When the vehicle is in REVERSE, the warning display will turn ON indicating the system status. (fig. 103) (fig. 104) The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object, the EVIC display will show fewer arcs and the sound tone will change from slow, to fast, to continuous. (fig. 105) (fig. 106) (fig.
The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 132 ENABLING AND DISABLING PARKSENSE® ParkSense® can be enabled and disabled using the Uconnect Touch™ System. The available choices are: Off, Sound Only, or Sound and Display. Refer to “Uconnect Touch™ Settings” for further information.
• When you move the shift lever to the REVERSE position and ParkSense® is turned off, the EVIC will display the “PARK ASSIST OFF” message for as long as the vehicle is in REVERSE. • Clean the ParkSense® sensors regularly, taking care not to scratch or damage them. The sensors must not be covered with ice, snow, slush, mud, dirt or debris. Failure to do so can result in the system not working properly.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES (Continued) • Before using the ParkSense® Rear Park Assist system, it is strongly recommended that the ball mount and hitch ball assembly is disconnected from the vehicle when the vehicle is not used for towing.
WARNING! Drivers must be careful when backing up even when using the ParkView® Rear Back Up Camera.Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, obstructions, or blind spots before backing up.You are responsible for the safety of your surroundings and must continue to pay attention while backing up. Failure to do so can result in serious injury or death. • To avoid vehicle damage, ParkView® should only be used as a parking aid.
KNOWING YOUR VEHICLE SOUND SYSTEMS Refer to your Uconnect Touch™ User Manual. NAVIGATION SYSTEM (for versions/markets, where provided) Refer to your Uconnect Touch™ User Manual.
STEERING WHEEL AUDIO CONTROLS The remote sound system controls are located on the rear surface of the steering wheel. The left and righthand controls are rocker-type switches with a pushbutton in the center of each switch. Reach behind the steering wheel to access the switches. (fig. 108) RIGHT-HAND SWITCH FUNCTIONS • Press the top of the switch to increase the volume. • Press the bottom of the switch to decrease the volume. • Press the button in the center of the switch to change modes (i.e., AM, FM, etc.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 138 UCONNECT™ MULTIMEDIA VIDEO ENTERTAINMENT SYSTEM (VES)™ (for versions/markets, where provided) Your rear seat Video Entertainment System (VES)™ is designed to give your family years of enjoyment. You can play your favorite CDs or DVDs, listen to audio over the wireless headphones, or plug and play a variety of standard video games or audio devices.
Remote Control Operation Quick Reference Chart This chart provides a quick reference of the remote control button functions for the different radio modes and menu screens. Remote Control Button AM/FM/ MW/LW Power Light Up Arrow Seek Up* Next Down Arrow Prev SAT– Audio Next Channel* Seek Down* Previous Channel* NOTE: • Ensure the remote control channel/screen selector switch is set to the screen or channel to be controlled.
KNOWING YOUR VEHICLE SAFETY Remote Control Button AM/FM/ MW/LW SAT– Audio Right Arrow FF Tune Up* Next Channel* Left Arrow RW Tune Down* Previous Channel* Enter Show Show Numeric Numeric Entry Menu* Entry Menu* STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 140 Standard Screens HDD– DISC/ AUX/AUX1/ Hard DVD AUX2 Disc Drive Next Fast Audio: Fast Channel Forward Forward Video Fast Play: Forward Video Selection Menu: Right Pre
Remote Control Button Back Setup Menu AM/FM/ MW/LW Not Available Not Available Not Available SAT– Audio Not Available Not Available Not Available Standard Screens HDD– DISC/ AUX/AUX1/ Hard DVD AUX2 Disc Drive Not Not Audio: Not Available Available Available Video Not Play: Available Video Previous Menu: Menu Show/ Not Audio: Not Hide Available Available Display Settings Video Show/ Menu Play: Hide Settings Show Channel Select Menu Show Disc Audio: Options Menu Video Play: Menu Screens Mode Sc
KNOWING YOUR VEHICLE SAFETY Remote Control Button AM/FM/ MW/LW SAT– Audio Play/Pause Not Available Not Available Stop Not Available Not Available Mute Slow Not Available Not Available STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 142 Standard Screens HDD– DISC/ AUX/AUX1/ Hard DVD AUX2 Disc Drive Not Pause if Audio: Pause if Available playing, playing/ else resume resume Video Pause if play Play: playing/ resume Video Acti
Remote Control Button Status AM/FM/ MW/LW Not Available SAT– Audio Not Available Mode Prog Up Prog Down Next Preset* Next Preset* Previous Previous Preset* Preset* Standard Screens HDD– DISC/ AUX/AUX1/ Hard DVD AUX2 Disc Drive Slow Not Audio: Not Mode and Available Available Content Info Video Show Play: Mode Info Show Mode Select Menu Not Available Not Available Not Available Not Available Ensure remote control selector switch is set to Screen or Channel to be controlled: 1 OR 2.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES When the selector switch is in the Channel 1 position, the remote controls the functionality of headphone Channel 1 (right side of the screen). When the selector switch is in the Channel 2, position the remote controls the functionality of headphone Channel 2 (left side of the screen). 5. ▸▸ – In radio modes, press to seek the next tunable station.
16. 17. 18. 19. markets, where provided) and the VES™ mode is selected and the disc is stopped, press the SETUP button to access the DVD Setup menu. (see the DVD Setup Menu of this manual.) BACK – When navigating in menu mode, press to return to the previous screen. When navigating a DVDs disc menu, the operation depends on the disc’s contents. ◂◂ – In radio modes, press to seek to the previous tunable station. In disc modes, press and hold to fast rewind through the current audio track or video chapter.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 146 Replacing The Batteries The remote control requires two AAA batteries for operation. To replace the batteries: • Locate the battery compartment on the back of the remote, then slide the battery cover downward. • Replace the batteries, making sure to orient them according to the polarity diagram shown. • Replace the battery compartment cover.
• When both switches are on Channel 2, the Remote is controlling Channel 2 and the headphones are tuned to the audio of the VES™ Channel 2. 2. Press the MODE button on the remote control. 3. If the video screen is displaying a video source (such as a DVD Video), pressing STATUS shows the status on a popup banner at the bottom of the screen. Pressing the MODE button will advance to the next mode. When the mode is in an audio only source (such as FM), the Mode Selection menu appears on screen. 4.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 148 This warranty gives you specific legal rights. You may also have other rights, which vary from jurisdiction to jurisdiction. What Will Unwired® Do? Unwired®, at its option, will repair or replace any defective Product. Unwired® reserves the right to replace any discontinued Product with a comparable model.
image. A popup banner at the bottom of the screen is displayed momentarily over the video image showing any change in status of Channel 2. When Channel 2 is in video mode, the image is displayed on the second rear seat screen as a full screen image. A popup banner at the bottom of the screen is displayed momentarily over the video image showing any change in status of Channel 1.
KNOWING YOUR VEHICLE Information Mode Display (fig. 113) SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 150 (fig. 113) Figure 5: Information Mode Video Screen Display When information mode is active, the current mode setting for both audio channels is displayed.
Mode Selection Menu (fig. 114) Screen 1 is selected using the remote control selector switch, the first press of the remote control’s MODE button causes the Mode Selection menu to appear. KNOWING YOUR VEHICLE Numeric Keypad Menu (fig. 115) SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES (fig. 114) Figure 6: Mode Selection Menu The first press of the MODE button causes the Mode Selection menu to appear on screen (Figure 6). The current mode is always the default selection.
KNOWING YOUR VEHICLE SAFETY 3. To delete the last digit, navigate to the Del button and press the remote control’s ENTER button. 4. After all of the digits are entered, navigate to the Go button and press the remote control’s ENTER button. Display Settings (fig. 117) Disc Menu (fig. 116) STARTING AND DRIVING (fig. 117) WARNING LIGHTS AND MESSAGES IN AN EMERGENCY Figure 10:Video Screen Display Settings (fig.
Disc Features control the remote DVD player's (for versions/markets, where provided) settings of DVD being watched in the remote player. Listening To Audio With The Screen Closed To listen to only audio portion of the channel with the screen closed: • Set the audio to the desired source and channel. • Close the video screen. • To change the current audio mode, press the remote control’s MODE button. This will automatically select the next available audio mode without using the Mode Select menu.
KNOWING YOUR VEHICLE When connecting an external source to the AUX input, be sure to follow the standard color coding for the VES™ jacks: SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 154 1. Video in (yellow) 2. Left audio in (white) 3. Right audio in (red) Using The Auxiliary Audio/Video Input Jacks (AUX) • Lower the screen or press the POWER button on the remote control to turn the screen on.
CD/DVD DISC MAINTENANCE To keep a CD/DVD in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper or tape to the disc; avoid scratching the disc. 4. Do not use solvents such as benzene, thinner, cleaners, or anti-static sprays. 5. Store the disc in its case after playing. 6. Do not expose the disc to direct sunlight. 7.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING ADDING FUEL FUEL FILLER CAP (GAS CAP) The gas cap is located behind the fuel filler door on the left side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap has been designed for use with this vehicle. (fig. 118) NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler door reinforcement.
NOTE: • Tighten the gas cap until you hear a “clicking” sound. This is an indication that the gas cap is tightened properly. The MIL in the instrument cluster may turn on if the gas cap is not secured properly. Make sure that the gas cap is tightened each time the vehicle is refueled. • When the fuel nozzle “clicks” or shuts off, the fuel tank is full.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 158 SAFETY OCCUPANT RESTRAINTS Some of the most important safety features in your vehicle are the restraint systems: • Three-point lap and shoulder belts for all seating positions • Advanced Front Air Bags for driver and front passenger • Supplemental Active Head Restraints (AHR) located on top of the front seats (integrated into the head restraint) (for versio
Buckle up even though you are an excellent driver, even on short trips. Someone on the road may be a poor driver and cause an accident that includes you. This can happen far away from home or on your own street. Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in an accident. Some of the worst injuries happen when people are thrown from the vehicle. Seat belts reduce the possibility of ejection and the risk of injury caused by striking the inside of the vehicle.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS (Continued) • Two people should never be belted into a single seat belt. People belted together can crash into one another in an accident, hurting one another badly. Never use a lap/shoulder belt or a lap belt for more than one person, no matter what their size. • Belts should not be worn with straps twisted.
WARNING! • A belt that is buckled into the wrong buckle will not protect you properly.The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly.In a sudden stop,you could move too far forward, increasing the possibility of injury.Wear your seat belt snugly. • A belt that is worn under your arm is dangerous.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 162 5. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. The retractor will withdraw any slack in the belt. 6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully.
3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the latch plate. 4. Continue to slide the latch plate up until it clears the folded webbing. SEAT BELTS IN PASSENGER SEATING POSITIONS The seat belts in the passenger seating positions are equipped with an Automatic Locking Retractor (ALR) or a cinching latch plate which are used to secure a child restraint system.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 164 WARNING! • The belt and retractor assembly must be replaced if the seat belt assembly Automatic Locking Retractor (ALR) feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual. • Failure to replace the belt and retractor assembly could increase the risk of injury in collisions.
All occupants, including the driver, should not operate a vehicle or sit in a vehicle's seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of an accident. NOTE: For more information on properly adjusting and positioning the head restraint, refer to “Adjusting Active Head Restraints” in “Knowing Your Vehicle”.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. (fig. 125) (fig. 126) 4. The AHR front soft foam and trim half should lock into the back decorative plastic half. (fig. 127) NOTE: • If you have difficulties or problems resetting the Active Head Restraints, see an authorized dealer. • For safety reasons, have the Active Head Restraints checked by a qualified specialist at an authorized dealer.
ACTIVE HOOD SYSTEM (for versions/ markets, where provided) The Active Hood system is intended to enhance pedestrian protection by elevating the vehicle’s hood upon an impact with a pedestrian or other object. The system is automatically activated when the vehicle is moving within a specified vehicle speed range. In order to detect a range of pedestrians, other objects that are impacted may result in an Active Hood deployment.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES The front bumper assembly may affect proper operation of the Active Hood system. The front bumper components should be inspected for damage and replaced if necessary in the event of a frontal impact, even if it occurs at a low rate of speed. NOTE: After any Active Hood deployment, the vehicle should be taken to an authorized dealer immediately. To prevent possible damage, do not slam the rear of the hood to reset it.
(Continued) • Drivers must be aware of pedestrians. Always be sure to check for pedestrians, animals, other vehicles, and obstructions.You are responsible for safety and must continue to pay attention to your surroundings. Failure to do so can result in serious injury or death. The front passenger seat BeltAlert® is not active when the front passenger seat is unoccupied.
KNOWING YOUR VEHICLE SAFETY CHILD RESTRAINTS Everyone in your vehicle needs to be buckled up all the time, including babies and children. Children 12 years or younger should ride properly buckled up in a rear seat, if available. According to crash statistics, children are safer when properly restrained in the rear seats rather than in the front. (fig. 129) STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS (fig.
Mass Group Group — up to 10 kg Group 0+ — up to 13 kg Group 1 – 9 to 18 kg Group II – 15 to 25 kg Group III — 22 to 36 kg Front Passenger X X X X X Seating Position (or other site) Intermediate Rear Outboard Rear Center Outboard *U N/A **U *U N/A **U *U N/A **U *U N/A **U *U N/A **U Key of letters used in the table above: U = Suitable for “universal” category restraints approved for use in this mass group.
KNOWING YOUR VEHICLE SAFETY Vehicle ISOFIX Positions Chart Mass Group Carrycot STARTING AND DRIVING 0 — up to 10 kg WARNING LIGHTS AND MESSAGES 0+ — up to 13 kg IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS I – 9 to 18 kg II – 15 to 25 kg III – 22 to 36 kg Size Class F G E E D C D C B B1 A Fixture ISO/L1 ISO/L2 (1) ISO/R1 (1) ISO/R1 ISO/R2 ISO/R3 (1) ISO/R2 ISO/R3 ISO/F2 ISO/F2X ISO/F3 (1) (1) (1) Front Rear Passenger Outboard X X X X X X X X X X X X X X X X X X X X X X X X X X X
IUF = Suitable for ISOFIX forward child restraints systems of universal category approved for use in the mass group. IL = Suitable for particular ISOFIX child restraint systems (CRS) given in the attached list. These ISOFIX CRS are those of the “specific vehicle”, “restricted” or “semi-universal” catagories. X = ISOFIX position not suitable for ISOFIX child restraint systems in this mass group and / or this size class.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE Children should remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height allowed by the child seat. These child seats are also held in the vehicle by the lap/shoulder belt or the ISOFIX child restraint anchorage system. Refer to “ISOFIX — Child Seat Anchorage System”.
8. To remove the slack from the lap belt, pull upward on the shoulder portion of the seat belt. 9. To release the seat belt, push the red button on the buckle. WARNING! Be certain that the seat cushion is locked securely into position before using the seat. Otherwise, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat cushion could cause serious injury. (fig.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 176 WARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision.The child could be badly injured or killed. Follow the manufacturer's directions exactly when installing an infant or child restraint. • A rearward-facing child restraint should only be used in a rear seat.
All three second-row passenger seating positions have lower anchorages that are capable of accommodating ISOFIX-compatible child seats. You should never install ISOFIX-compatible child seats so that two seats share a common lower anchorage. If installing child seats in adjacent seating positions, or if your child restraints are not ISOFIX-compatible, install the restraints using the vehicle's seat belts. (fig.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES The lower anchorages are round bars located at the rear of the seat cushion where it meets the seatback and are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces. (fig. 134) In addition, there are tether strap anchorages located behind each rear seatback, near to the floor. (fig.
seating position, adjust the head restraint to the upward position and route the tether strap between the head restraint posts underneath the head restraint. Then, attach the hook to the tether anchor located on the back of the seat. Finally, tighten all three straps as you push the child restraint rearward and downward into the seat, removing slack in the straps according to the child restraint manufacturer's instructions.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 180 2. Finally, pull on any excess webbing to tighten the lap portion around the child restraint. Any seat belt system will loosen with time, so check the belt occasionally, and pull it tight if necessary. Installing a Child Restraint with an ALR: 1.
WARNING! • Child Restraint Anchorages are designed to withstand only those loads imposed by correctly-fitted child restraints. Under no circumstances are they to be used for adult seat belts, harnesses or for attaching other items or equipment to the vehicle. • An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 182 The Advanced Front Air Bags have a multistage inflator design. This allows the air bag to have different rates of inflation based on the severity and type of collision. This vehicle may be equipped with a driver and/or front passenger seat belt buckle switch that detects whether the driver or front passenger seat belt is fastened.
WARNING! • No objects should be placed over or near the air bag on the instrument panel, because any such objects could cause harm if the vehicle is in a collision severe enough to cause the air bag to inflate. • Do not put anything on or around the air bag covers or attempt to open them manually. You may damage the air bags and you could be injured because the air bags may no longer be functional.The protective covers for the air bag cushions are designed to open only when the air bags are inflating.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES Supplemental Side Air Bag Inflatable Curtain (SABIC) SABIC air bags may offer side-impact and vehicle rollover protection to front and rear seat outboard occupants in addition to that provided by the body structure. Each air bag features inflated chambers placed adjacent to the head of each outboard occupant that reduce the potential for side-impact head injuries.
(Continued) • Do not use accessory seat covers or place objects between you and the side air bags; the performance could be adversely affected and/or objects could be pushed into you, causing serious injury. Knee Impact Bolsters (for versions/markets, where provided) The Knee Impact Bolsters help protect the knees of the driver and the front passenger, and position front occupants for the best interaction with the Advanced Front Air Bags.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 186 If the air bag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided under "If You Need Assistance". WARNING! • Relying on the air bags alone could lead to more severe injuries in a collision. The air bags work with your seat belt to restrain you properly.
Seat belts are necessary for your protection in all accidents, and also are needed to help keep you in position, away from an inflating air bag. The ORC monitors the readiness of the electronic parts of the air bag system whenever the ignition is in the ON/RUN position. If the ignition is in the OFF position, or in the ACC position, the air bag system is not on and the air bags will not inflate.
KNOWING YOUR VEHICLE The Advanced Front Air Bag gas is vented through the vent holes in the sides of the air bag. In this way, the air bags do not interfere with your control of the vehicle. SAFETY Supplemental Seat-Mounted Side Air Bag (SAB) Inflator Units The Supplemental Seat-Mounted Side Air Bags (SAB) are designed to activate only in certain side collisions.
• Cut off fuel to the engine. • Flash hazard lights as long as the battery has power or until the ignition is cycled off. • Turn on the interior lights, which remain on as long as the battery has power or until the ignition key is removed. • Unlock the doors automatically. If A Deployment Occurs The Advanced Front Air Bags are designed to deflate immediately after deployment. NOTE: Front and/or side air bags will not deploy in all collisions. This does not mean something is wrong with the air bag system.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 190 Maintaining Your Air Bag System WARNING! • Modifications to any part of the air bag system could cause it to fail when you need it. You could be injured if the air bag system is not there to protect you.
• The Air Bag Warning Light remains on after the four to eight-second interval. • The Air Bag Warning Light comes on intermittently or remains on while driving. NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint Controller (ORC) may also be disabled. The air bags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to the label located on the inside of the fuse block cover for the proper air bag fuses.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 192 SAFETY TIPS TRANSPORTING PASSENGERS NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. WARNING! • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the complete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 194 (Continued) • Never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from moving and interfering with the pedals or the ability to control the vehicle. • Never put floor mats or other floor coverings on top of already installed floor mats.
STARTING AND DRIVING ENGINE BREAK-IN RECOMMENDATIONS A long break-in period is not required for the engine and drivetrain (transmission and axle) in your vehicle. Drive moderately during the first 500 km. After the initial 100 km, speeds up to 80 or 90 km/h are desirable. While cruising, brief full-throttle acceleration, within the limits of local traffic laws contributes to a good break-in. Wide-open throttle acceleration in low gear can be detrimental and should be avoided.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 196 (Continued) • Do not leave animals or children inside parked vehicles in hot weather; interior heat buildup may cause serious injury or death. KEYLESS ENTER-N-GO This feature allows the driver to operate the ignition switch with the push of a button, as long as the Remote Keyless Entry (RKE) transmitter is in the passenger compartment.
ENGINE START/STOP Button Functions – With Driver’s Foot OFF The Brake Pedal (In PARK Or NEUTRAL Position) The ENGINE START/STOP button operates similar to an ignition switch. It has four positions, OFF, ACC, RUN and START. To change the ignition switch positions without starting the vehicle and use the accessories follow these steps.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 198 motor will engage automatically, run for 10 seconds, and then disengage. Once this occurs, release the accelerator pedal and the brake pedal, wait 10 to 15 seconds, then repeat the “Normal Starting” procedure. AFTER STARTING The idle speed is controlled automatically and it will decrease as the engine warms up.
before the engine will shut off. The ignition switch position will remain in the ACC position until the vehicle is stopped and the button is pressed twice to the OFF position. Turbocharger “Cool Down” The following chart should be used as a guide in determining the amount of engine idle time required to sufficiently cool down the turbocharger before shut down, depending upon the type of driving and the amount of cargo.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES PARKING BRAKE Before leaving the vehicle, make sure that the parking brake is fully applied. Also, be certain to leave an automatic transmission in PARK, or manual transmission in REVERSE or first gear. Manual Transmission – For Versions/Markets, Where Provided The parking brake lever is located in the center console. To apply the parking brake, pull the lever up as firmly as possible.
will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. • This light only shows that the parking brake is applied. It does not show the degree of brake application. When parking on a hill, it is important to turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES MANUAL TRANSMISSION (for versions/markets, where provided) WARNING! You or others could be injured if you leave the vehicle unattended without having the parking brake fully applied.The parking brake should always be applied when the driver is not in the vehicle, especially on an incline. Fully press the clutch pedal before you shift gears. As you release the clutch pedal, lightly press the accelerator pedal. (fig.
DOWNSHIFTING Proper downshifting will improve fuel economy and prolong engine life. If you skip a gear while downshifting or downshift at too high a vehicle speed,you could damage the engine, transmission, or clutch. To maintain a safe speed and prolong brake life, shift down to second or first when descending a steep grade. When turning a corner, or driving up a steep grade, downshift early so that the engine will not be overburdened.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 204 WARNING! • It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something.
SIX-SPEED AUTOMATIC TRANSMISSION The shift lever position display (located in the instrument panel cluster) indicates the transmission gear range. You must press the brake pedal to move the shift lever out of the PARK position (refer to “Brake/ Transmission Shift Interlock System” in this section). To drive, move the shift lever from PARK or NEUTRAL to the DRIVE position. The electronically-controlled transmission provides a precise shift schedule.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 206 the transmission locking mechanism may make it difficult to move the shift lever out of PARK. As an added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. WARNING! • Never use the PARK position as a substitute for the parking brake.
• Before moving the shift lever out of PARK, you must turn the ignition switch from the LOCK/OFF position to the ON/ RUN position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range, as this can damage the drivetrain.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 208 When frequent transmission shifting occurs (such as when operating the vehicle under heavy loading conditions, in hilly terrain, traveling into strong head winds, or while towing heavy trailers), use the AutoStick® mode (refer to “AutoStick®” in “Starting And Driving” for further information) to select a lower gear.
• the transmission fluid has reached an adequate temperature, • the engine coolant has reached an adequate temperature, and • vehicle speed is sufficiently high. Torque Converter Clutch A feature designed to improve fuel economy has been included in the automatic transmission on your vehicle. A clutch within the torque converter engages automatically at calibrated speeds. This may result in a slightly different feeling or response during normal operation in the upper gears.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 210 DRIVING ON SLIPPERY SURFACES ACCELERATION Rapid acceleration on snow covered, wet, or other slippery surfaces may cause the driving wheels to pull erratically to the right or left. This phenomenon occurs when there is a difference in the surface traction under the front (driving) wheels. WARNING! Rapid acceleration on slippery surfaces is dangerous.
DRIVING THROUGH WATER Driving through water more than a few centimeters deep will require extra caution to ensure safety and prevent damage to your vehicle. FLOWING/RISING WATER WARNING! Do not drive on, or cross, a road or a path where water is flowing and/or rising (as in storm run-off). Flowing water can wear away the road or path's surface and cause your vehicle to sink into deeper water. Furthermore, flowing and/or rising water can carry your vehicle away swiftly.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 212 WARNING! • Driving through standing water limits your vehicle’s traction capabilities. Do not exceed 8 km/h when driving through standing water. • Driving through standing water limits your vehicle’s braking capabilities, which increases stopping distances.
TRAILER TOWING In this section, you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer, carefully review this information to tow your load as efficiently and safely as possible. To maintain warranty coverage, follow the requirements and recommendations in this manual concerning vehicles used for trailer towing.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS WARNING! An improperly adjusted hitch system may reduce handling, stability and braking performance and could result in an accident. Consult with your hitch and trailer manufacturer or a reputable trailer/dealer for additional information. With Attachment Point • For detachable tow bar, pass the cable through the attachment point and clip it back onto itself. (fig.
Without Attachment Points • For detachable ball tow bar, you must follow the recommended manufacturer or supplier procedure. (fig. 147) • For fixed ball tow bar, loop the cable around the neck of the tow ball. If you fit the cable like this, use a single loop only. (fig. 148) KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES (fig. 147) Detachable Ball Neck Loop Method IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS (fig. 146) (fig.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 216 TRAILER TOWING WEIGHTS (MAXIMUM TRAILER WEIGHT RATINGS) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/Transmission Frontal Area Max. GTW (Gross Trailer Wt.) (5 and 7 Passenger Model) 1,100 kg 1,100 kg Max.Tongue Wt. ◊ (5 and 7 Passenger Model) 3.6L/Automatic 3.7 sq m 55 kg 2.0L Diesel/Manual 3.
TOWING REQUIREMENTS To promote proper break-in of your new vehicle drivetrain components the following guidelines are recommended: • Do not tow a trailer at all during the first 805 km the new vehicle is driven.The engine, axle or other parts could be damaged. • Then, during the first 805 km that a trailer is towed, do not drive over 80 km/h and do not make starts at full throttle. This helps the engine and other parts of the vehicle wear in at the heavier loads.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 218 (Continued) • Total weight must be distributed between the tow vehicle and the trailer such that the following four ratings are not exceeded: 1. GVWR 2. GTW 3. GAWR 4. Tongue weight rating for the trailer hitch utilized.
WARNING! • Do not connect trailer brakes to your vehicle's hydraulic brake lines. It can overload your brake system and cause it to fail. You might not have brakes when you need them and could have an accident. • Towing any trailer will increase your stopping distance.When towing, you should allow for additional space between your vehicle and the vehicle in front of you. Failure to do so could result in an accident.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES (fig. 150) Pin Number 1 2 3a 4 5 6 7 IN AN EMERGENCY Function Left Turn Signal Rear Fog Light Ground/Common Return for Contacts (Pins) 1 and 2 and 4 to 8 Right Turn Signal Right Rear Position, Side Marker Lights, and Rear Registration Plate Illumination Device.b Stoplights Left Rear Position, Side Marker Lights, and Rear Registration Plate Illumination Device.
Automatic Transmission (for versions/markets, where provided) The DRIVE range can be selected when towing. However, if frequent shifting occurs while in this range, select a lower gear (using the AutoStick® shift control). NOTE: Using a lower gear while operating the vehicle under heavy operating conditions will improve performance and extend transmission life by reducing excessive shifting and heat build up. This action will also provide better engine braking.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES chart to determine the accurate attaching points. Other equipment, such as trailer sway controls and braking equipment, trailer equalizing (leveling) equipment and low profile mirrors, may also be required or strongly recommended. (fig. 151) Trailer Tow Hitch Attaching Points And Overhang Dimensions A N/A B 366.71 mm C 501.62 mm D 628.69 mm E (maximum overhang) 1051.93 mm F 472.
NOTE: This vehicle may be towed on a flatbed or vehicle trailer provided all four wheels are OFF the ground. Towing this vehicle in violation of the above requirements can cause severe transmission damage. Damage from improper towing is not covered under the New Vehicle Limited Warranty.
KNOWING YOUR VEHICLE WARNING LIGHTS AND MESSAGES INSTRUMENT CLUSTER (fig. 152) SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS (fig.
INSTRUMENT CLUSTER DESCRIPTIONS 1. Air Bag Warning Light This light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to ON/RUN. If the light is either not on during starting, stays on, or turns on while driving, have the system inspected at an authorized dealer as soon as possible. Refer to “Occupant Restraints” in “Safety” for further information. 2.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 226 cycles, and the vehicle has been driven several kilometers at speeds greater than 48 km/h, see your authorized dealer as soon as possible to have the problem diagnosed and corrected. NOTE: • The “ESC Off Indicator Light” and the “ESC Activation/Malfunction Indicator Light” come on momentarily each time the ignition switch is turned to ON/RUN.
8. Park/Headlight ON Indicator (for versions/markets, where provided) This indicator will illuminate when the park lights or headlights are turned on. (Refer to “Lights” in “Knowing Your Vehicle” for further information). 9.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 228 The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style.Aftermarket wheels can cause sensor damage.
If brake failure is indicated, immediate repair is necessary. WARNING! Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle.You could have a collision. Have the vehicle checked immediately. Vehicles equipped with the Anti-Lock Brake System (ABS), are also equipped with Electronic Brake Force Distribution (EBD). In the event of an EBD failure, the Brake Warning Light will turn on along with the ABS Light.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 230 14. Rear Fog Light Indicator (for versions/ markets, where provided) This indicator will illuminate when the rear fog lights are on. (Refer to “Rear Fog Lights” in “Knowing Your Vehicle” for further information). 15.
IN AN EMERGENCY JUMP-STARTING If your vehicle has a discharged battery, it can be jump-started using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. Jump-starting can be dangerous if done improperly so please follow the procedures in this section carefully. PREPARATIONS FOR JUMP-START The battery in your vehicle is located between the left front headlight assembly and the left front wheel splash shield.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 232 WARNING! • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is ON.You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact.You could be seriously injured.
WARNING! Do not connect the cable to the negative post (-) of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. 5. Start the engine in the vehicle that has the booster battery, let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery. Once the engine is started, remove the jumper cables in the reverse sequence: 6.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE JACKING AND TIRE CHANGING WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed.
WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. 2. 3. 4. 5. Turn on the Hazard Warning flashers. Set the parking brake. Place the shift lever in PARK. Turn OFF the ignition. 6. Block both the front and rear of the wheel diagonally opposite of the jacking position. For example, if changing the right front tire, block the left rear wheel.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY The winch mechanism is designed for use with the jack-handle only. Use of an air wrench or other power tools is not recommended and it can damage the winch. 3. Pull the spare tire out from underneath the vehicle and raise it upright so the tire's tread is on the ground. 4. Tilt the retainer at the end of the winch cable and remove it from the center of the wheel. (fig.
(Continued) • Never start or run the engine with the vehicle on a jack. • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the vehicle when it is on a jack. • Only use the jack in the positions indicated and for lifting this vehicle during a tire change. • If working on or near a roadway, be extremely careful of motor traffic. • To assure that spare tires, flat or inflated, are securely stowed, spares must be stowed with the valve stem facing the ground. (fig.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES jack screw clockwise to firmly engage the jack saddle with the lift area of the sill flange. (fig. 159) (fig. 160) 4. Raise the vehicle by turning the jack screw clockwise with the jack handle. Raise the vehicle until the tire just clears the road surface and enough clearance is obtained to install the spare tire. Minimum tire lift provides maximum stability.
Be sure to mount the spare tire with the valve stem facing outward. The vehicle could be damaged if the spare tire is mounted incorrectly. (fig. 161) NOTE: • For vehicles so equipped, do not attempt to install a center cap or wheel cover on the compact spare. • Refer to “Compact Spare Tire” and to “Limited-Use Spare” under “Tires — General Information” in “Starting And Operating” for additional warnings, cautions, and information about the spare tire, its use, and operation. 7.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 240 WARNING! A loose tire or jack, thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided. Have the deflated (flat) tire repaired or replaced immediately. 11. Place the deflated (flat) tire in the cargo area.
3. Align the valve notch in the wheel cover with the valve stem on the wheel. Install the cover by hand, snapping the cover over the two lug nuts. Do not use a hammer or excessive force to install the cover. 4. Install the remaining lug nuts with the cone shaped end of the nut toward the wheel. Lightly tighten the lug nuts. WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES TIREFIT KIT (for versions/markets, where provided) Small punctures up to 6 mm in the tire tread can be sealed with TIREFIT. Foreign objects (e.g., screws or nails) should not be removed from the tire. TIREFIT can be used in outside temperatures down to approximately -20°C. This kit will provide a temporary tire seal, allowing you to drive your vehicle up to 160 km with a maximum speed of 88 km/h.
Selecting Air Mode Turn the Mode Select Knob (5) to this position for air pump operation only. Use the Black Air Pump Hose (7) when selecting this mode. Selecting Sealant Mode Turn the Mode Select Knob (5) to this position to inject the TIREFIT Sealant and to inflate the tire. Use the Sealant Hose (clear hose) (6) when selecting this mode. Using The Power Button Push and release the Power Button (4) once to turn On the TIREFIT kit. Push and release the Power Button (4) again to turn Off the TIREFIT kit.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 244 WARNING! • Do not attempt to seal a tire on the side of the vehicle closest to traffic. Pull far enough off the road to avoid the danger of being hit when using the TIREFIT kit. • Do not use TIREFIT or drive the vehicle under the following circumstances: − If the puncture in the tire tread is approximately 6 mm or larger.
vehicle as necessary to place the valve stem in this position before proceeding. 3. Place the transmission in PARK (auto transmission) or in Gear (manual transmission) and turn Off the ignition. 4. Set the parking brake. (B) Setting Up To Use TIREFIT: 1. Turn the Mode Select Knob (5) to the Sealant Mode position. 2. Uncoil the Sealant Hose (6) and then remove the cap from the fitting at the end of the hose. 3. Place the TIREFIT kit flat on the ground next to the deflated tire. 4.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 246 If the sealant (white fluid) does flow through the Sealant Hose (6): 1. Continue to operate the pump until sealant is no longer flowing through hose (typically takes 30 70 seconds). As the sealant flows through the Sealant Hose (6), the Pressure Gauge (3) can read as high as 5 Bar.
WARNING! TIREFIT is not a permanent flat tire repair. Have the tire inspected and repaired or replaced after using TIREFIT. Do not exceed 88 km/h until the tire is repaired or replaced. Failure to follow this warning can result in injuries that are serious or fatal to you, your passengers, and others around you. (E) After Driving: Pull over to a safe location. Refer to “Whenever You Stop to Use TIREFIT” before continuing. 1. Turn the Mode Select Knob (5) to the Air Mode position. 2.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 248 4. Clean any remaining sealant from the TIREFIT housing. 5. Position the new Sealant Bottle (1) in the housing so that the Sealant Hose (6) aligns with the hose slot in the front of the housing. Press the bottle into the housing. An audible click will be heard indicating the bottle is locked into place. 6.
BULB REPLACEMENT LOW BEAM/HIGH BEAM/FRONT TURN SIGNAL AND FRONT POSITION LAMP 1. Open the hood. NOTE: It may be necessary to remove the air cleaner filter housing and position the Totally Integrated Power Module (TIPM) aside to replace certain lamps in the left headlamp housing. 2. Rotate the applicable bulb and connector assembly 1∕4 turn counterclockwise and remove the assembly from the headlamp housing. (fig. 165) 3. Disconnect the bulb from the harness connector and then connect the replacement bulb.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES 5. Align the index tabs of the replacement front fog lamp bulb with the slots in the collar of the bulb opening on the back of the front fog lamp housing. Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. 6.
7. Align the index tabs of the replacement rear fog lamp bulb/socket assembly with the slots in the collar of the bulb opening on the back of the lamp housing. 8. Insert bulb into the lamp housing until the index tabs are engaged in the slots of the collar. 9. Firmly and evenly push the bulb straight into the lamp housing until both side latches lock firmly into place. 10. Reinstall the fog lamp housing. SIDE REPEATER LAMP The side repeater lamps are located in both front fender panels. 1.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY 2. Remove the two fasteners from the inboard side of the taillamp housing. (fig. 170) 3. Carefully insert a trim stick (plastic flat-blade tool) between the body panel and the outboard side of the taillamp housing with one hand and grasp the flange on the inboard side of the taillamp housing with the other hand. Use the trim stick and hand pressure together to disengage the taillamp housing from the vehicle. 4.
6. Install the bulb and connector assembly into the housing and rotate the connector 1∕4 turn clockwise to lock it in place. 7. Reinstall the taillamp housing and fasteners. LICENSE PLATE LAMP 1. Push the small locking tab sticking out of the end of the lens toward the side of the vehicle and hold it in that position. 2. Insert a small flat-blade tool between the end of the lens with the locking tab and the surrounding housing and then pivot the tool to separate the lens from the housing. 3.
KNOWING YOUR VEHICLE FUSES Cavity INTERIOR FUSES The interior fuse panel is located on the passenger side under the instrument panel.
Cavity F122 F123 F124 F125 F126 Cartridge Fuse MiniFuse 25 Amp Natural 25 Amp Natural 10 Amp Red 10 Amp Red 10 Amp Red F127 20 Amp Yellow F128 15 Amp Blue F129 15 Amp Blue F130 15 Amp Blue F131 10 Amp Red Description Driver Door Module Passenger Door Module Mirrors Steering Column Control Module Audio Amplifier Trailer Tow – For Versions/Markets, Where Provided Radio Video/DVD – For Versions/Markets, Where Provided Climate Control/Instrument Panel Passenger Assistance/Hands Free System – For Ve
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES UNDERHOOD FUSES (POWER DISTRIBUTION CENTER) The power distribution center is located in the engine compartment. (fig.
Cavity F148 F149 Cartridge Fuse 40 Amp Green 30 Amp Pink F152 F153 Starter Solenoid 30 Amp Pink 25 Amp Natural 20 Amp Yellow F156 10 Amp Red F157 10 Amp Red F158 Description Radiator Fan Motor 25 Amp Natural F150 F151 MiniFuse 10 Amp Red Powertrain Control Modules Headlamp Washer Motor – For Versions/Markets, Where Provided Diesel Fuel Heater – For Versions/ Markets, Where Provided Fuel Pump Brake/Electronic Stability Control Module Transfer Case Module – For Versions/Markets, Where Provid
KNOWING YOUR VEHICLE Cavity Cartridge Fuse F169 40 Amp Green SAFETY F170 STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY F172 F173 F174 F175 F176 SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 258 MiniFuse 15 Amp Blue 20 Amp Yellow 25 Amp Natural 20 Amp Yellow 30 Amp Green 10 Amp Red F177 20 Amp Yellow F178 25 Amp Natural F179 10 Amp Red Description Emissions – Partial Zero Emissions Vehicle Motor Emissions – Partial Zero Emissions Vehicle Actuators Spare Anti Lock B
FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow, it can often be moved by a rocking motion. Turn your steering wheel right and left to clear the area around the front wheels. Then shift back and forth between DRIVE and REVERSE (with automatic transmission) or 1st gear and REVERSE (with manual transmission). Using the least accelerator pedal pressure to maintain the rocking motion without spinning the wheels is most effective.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES TOW EYE Your vehicle is equipped with a tow eye that can be used to rescue your vehicle, should it become stranded off road. (fig. 174) Tow eyes are for emergency use only, to rescue a vehicle stranded off road.Do not use tow eyes for tow truck hookup or highway towing.You could damage your vehicle. Tow straps are recommended when towing the vehicle; chains may cause vehicle damage.
REAR TOW EYE USAGE The rear tow eye receptacle is located behind a door, located on the left rear bumper fascia. KNOWING YOUR VEHICLE To install the tow eye, open the door using the vehicle key or a small screwdriver, and thread the tow eye into the receptacle. SAFETY Insert the flat end of the jack handle through the eye and tighten, refer to “Jacking and Tire Changing” for further information. The tow hook must be fully seated to the attaching bracket through the lower front fascia as shown.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 262 TOWING A DISABLED VEHICLE Towing Condition Wheels OFF The Ground Flat Tow NONE Wheel Lift Or Dolly Tow Flatbed MANUAL TRANSMISSION • Trans in NEUTRAL • Ignition key in ACC Rear Front NO OK ALL BEST METHOD Proper towing or lifting equipment is required to prevent damage to your vehicle.
MANUAL TRANSMISSION The manufacturer recommends towing your vehicle with all four wheels OFF the ground using a flatbed. Your vehicle may also be towed in a forward direction, with all four wheels on the ground, the shift lever in the NEUTRAL position, and the ignition key in the ACC position. If the transmission is not operative, the vehicle must be towed with the front wheels OFF the ground (using a flatbed truck, towing dolly, or wheel lift equipment with the front wheels raised).
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 264 SERVICING AND CARE MAINTENANCE SCHEDULE MAINTENANCE SCHEDULE – GASOLINE ENGINE Required Maintenance Intervals Refer to the Maintenance Schedules on the following pages for the required maintenance intervals. Thousands Of Kilometers 24 48 72 96 120 144 168 192 Months Flush and replace the engine coolant (or at 60 months).
Thousands Of Kilometers 24 48 72 96 120 144 168 192 Months Check condition and wear of front disc brake pads and operation of pad wear indicator. Check condition and wear of rear disc brake pads and operation of pad wear indicator. Check and, if necessary, top up fluid levels (brakes/hydraulic clutch, windshield washer, battery, engine coolant, etc.). Visually inspect the condition of accessory drive belt/s.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 266 (*) Change the automatic transmission fluid and filter(s) at 96 000 km or 48 months if using your vehicle for any of the following: city driving, short (less than 7-8 km) and repeated journeys, or frequent trailer or caravan towing.
MAINTENANCE SCHEDULE — DIESEL ENGINE KNOWING YOUR VEHICLE Required Maintenance Intervals Refer to the Maintenance Schedules on the following pages for the required maintenance intervals. Thousands Of Kilometers 30 60 90 120 150 180 Months 24 48 72 96 120 144 • • • • • • Check tire condition/wear and adjust pressure if required. Check lighting system operation (headlights, direction indicators, hazard lights, passenger compartment lights, instrument panel warning lights, etc.).
Thousands Of Kilometers 30 60 90 120 150 180 Months 24 48 72 96 120 144 Check exhaust fumes/emissions. • • • • • • Check battery charge status and possibly recharge. • • • • • • Check engine control system operation (via diagnostic socket). • • • • • • KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY Visually inspect the condition of the auxiliary drive belt. • • Replace auxiliary drive belts.
** If the car is used for less than 10 000 km per year, it is necessary to replace engine oil and cartridge every 12 months. *** The actual interval for replacement of engine oil and cartridge depends by vehicle usage conditions and is shown through a gauge or a message (if available) on the dashboard or at least every 24 months. Failure to perform the required maintenance items may result in damage to the vehicle.
KNOWING YOUR VEHICLE ENGINE COMPARTMENT — 3.6L (fig. 177) SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 270 (fig.
ENGINE COMPARTMENT — 2.0L DIESEL (fig. 178) KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS (fig.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 272 MAINTENANCE PROCEDURES ENGINE OIL The pages that follow contain the required maintenance services determined by the engineers who designed your vehicle. Checking Oil Level – Gasoline Engine To assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop.
Checking Oil Level – Diesel Engine To assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. The engine oil filler cap also shows the recommended engine oil viscosity for your vehicle. For information on engine oil filler cap location, refer to “Engine Compartment” in “Servicing And Care” for further information.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 274 ENGINE AIR CLEANER FILTER Refer to the “Maintenance Schedule” for the proper maintenance intervals. WARNING! The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.) unless such removal is necessary for repair or maintenance.
• It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and identified on the battery case. Cable clamps should be tight on the terminal posts and free of corrosion. • If a “fast charger” is used while the battery is in the vehicle,disconnect both vehicle battery cables before connecting the charger to the battery.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS A/C AIR FILTER (for versions/markets, where provided) Refer to the “Maintenance Schedule” for the proper maintenance intervals. WARNING! Do not remove the A/C air filter while the blower is operating or personal injury may result. The A/C air filter is located in the fresh air inlet behind the glove box. Perform the following steps to replace the filter: 1.
The A/C air filter is identified with an arrow to indicate airflow direction through the filter. Failure to install the filter properly will result in the need to replace it more often. WIPER BLADES Clean the rubber edges of the wiper blades and the windshield and rear window periodically with a sponge or soft cloth and a mild nonabrasive cleaner. This will remove accumulations of salt, waxes, or road film, and help reduce streaking and smearing. 7. Reinstall the glove box door.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES Rear Wiper Removal/Installation (for versions/markets, where provided) 1. Lift the pivot cap on the rear wiper arm upward, this will allow the rear wiper blade to be raised off of the liftgate glass. (fig. 181) 4. Install the wiper blade pivot pin into the wiper blade holder at the end of the wiper arm, and firmly press the wiper blade until it snaps into place. 5. Lower the wiper blade and snap the pivot cap into place.
When refilling the washer fluid reservoir, apply some washer fluid to a cloth or towel and wipe the wiper blades clean. This will help blade performance. Refer to “Electronic Vehicle Information Center (EVIC)” in “Knowing Your Vehicle” for further information. To prevent freeze-up of your windshield washer system in cold weather, select a solution or mixture that meets or exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 280 NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. WARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system.
Cooling System – Drain, Flush,And Refill Refer to the “Maintenance Schedule” for the proper maintenance intervals. If the solution is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals. Properly dispose of the old engine coolant (antifreeze) solution. Selection Of Coolant – Gasoline Engine Use only the manufacturer's recommended coolant.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 282 five years or 168 000 km before replacement. To prevent reducing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle. • The manufacturer recommends using 50% mixture of demineralized water and PARAFLU UP* that meets FIAT Qualification 9.55523 Antifreeze/ Coolant or equivalent.
(Continued) • Do not use a pressure cap other than the one specified for your vehicle. Personal injury or engine damage may result. ing from the front of the engine compartment. This is normally a result of moisture from rain, snow, or high humidity accumulating on the radiator and being vaporized when the thermostat opens, allowing hot coolant to enter the radiator. Disposal Of Used Coolant Used ethylene glycol-based engine coolant is a regulated substance requiring proper disposal.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES BRAKE SYSTEM In order to assure brake system performance, all brake system components should be inspected periodically. Refer to the “Maintenance Schedule” for the proper maintenance intervals. WARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage.
(Continued) • To avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container. Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lower boiling point. This may cause it to boil unexpectedly during hard or prolonged braking, resulting in sudden brake failure.This could result in a accident.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE Fluid Level Check – Six-Speed Automatic Routine fluid level checks are not required, therefore the transmission has no dipstick. Your authorized dealer can check your transmission fluid level using a special service dipstick. If you notice fluid leakage or transmission malfunction, visit your authorized dealer immediately to have the transmission fluid level checked.
POWER TRANSFER UNIT (PTU) – AWD MODELS ONLY tions will have an adverse effect on paint, metal trim, and underbody protection. Lubricant Selection Use only the manufacturer's recommended fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Technical Specifications” for further information. The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion resistance built into your vehicle.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 288 Do not use abrasive or strong cleaning materials such as steel wool or scouring powder that will scratch metal and painted surfaces. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month.
Interior Care Instrument Panel Cover The instrument panel cover has a low glare surface, which minimizes reflections in the windshield. Do not use protectants or other products, which may cause undesirable reflections. Use soap and warm water to restore the low glare surface. Cleaning Interior Trim Interior trim should be cleaned starting with a damp cloth. Do not use harsh cleaners. Cleaning Leather Upholstery Your leather upholstery can be best preserved by regular cleaning with a damp soft cloth.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 290 1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe clean with a clean damp rag. 2. Dry with a soft cloth. Seat Belt Maintenance Do not bleach, dye, or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric.
TECHNICAL SPECIFICATIONS VEHICLE IDENTIFICATION NUMBER The Vehicle Identification Number (VIN) is on the left front corner of the instrument panel and is visible from outside of the vehicle through the windshield. This number also appears stamped on the right front door sill under the sill moulding and printed on the Automobile Information Disclosure Label affixed to a window on your vehicle, the vehicle registration and title. (fig. 183) (fig.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 292 Safety WARNING! • Improperly inflated tires are dangerous and can cause collisions. • Under-inflation increases tire flexing and can result over-heating and in tire failure. • Over-inflation reduces a tire's ability to cushion shock. Objects on the road and chuckholes can cause damage that result in tire failure.
Check tire pressures more often if subject to a wide range of outdoor temperatures, as tire pressures vary with temperature changes. Tire pressures change by approximately 0.07 BAR per 7°C of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in the winter. Example: If garage temperature = 20°C and the outside temperature = 0°C then the cold tire inflation pressure should be increased by 0.21 BAR, which equals 0.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 294 for your vehicle. If your vehicle has this option refer to an authorized tire dealer for the recommended tire rotation pattern. If your vehicle is not equipped with an original equipment tire and wheel as a spare, a non-matching temporary emergency use spare may be equipped with your vehicle.
FULL SIZE SPARE (for versions/markets, where provided) The full size spare is for temporary emergency use only. This tire may look like the original equipped tire on the front or rear axle of your vehicle, but it is not. This spare tire may have limited tread life. When the tread is worn to the tread wear indicators, the temporary use full size spare tire needs to be replaced.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause tire damage or failure. A tire could explode and injure someone. Do not spin your vehicle's wheels faster than 48 km/h or for more than 30 seconds continuously when you are stuck, and do not let anyone near a spinning wheel, no matter what the speed.
REPLACEMENT TIRES The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure. The manufacturer strongly recommends that you use tires equivalent to the originals in size, quality and performance when replacement is needed (refer to the paragraph on “Tread Wear Indicators”). Refer to the “Tire and Loading Information” placard for the size designation of your tire.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 298 FUEL REQUIREMENTS — GASOLINE ENGINE All engines are designed to meet all emissions regulations and provide excellent fuel economy and performance when using high quality unleaded gasoline with a minimum research octane rating of 91. The use of premium gasoline is not recommended, as it will not provide any benefit over regular gasoline in these engines.
Use of fuel with Ethanol content higher than 10% may result in engine malfunction, starting and operating difficulties, and materials degradation.These adverse effects could result in permanent damage to your vehicle. Clean Air Gasoline Many gasolines are now being blended to contribute to cleaner air, especially in those areas where air pollution levels are high. These new blends provide a cleaner burning fuel and some are referred to as “reformulated gasoline.
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 300 (Continued) • Guard against carbon monoxide with proper maintenance.Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repaired promptly. Until repaired, drive with all side windows fully open.
FLUID CAPACITIES Fuel (Approximate) Engine Oil with Filter 3.6L Engine 2.0L Diesel Engine Cooling System * 3.6L Engine and Single- or Dual-Zone Climate Control System 3.6L Engine and Three-Zone Climate Control System 2.0L Diesel Engine and Single- or Dual-Zone Climate Control System 2.0L Diesel Engine and Three-Zone Climate Control System * Includes heater and coolant recovery bottle filled to MAX level. Metric 77.6 Liters 5.6 Liters 5.2 Liters 12.4 Liters 13.7 Liters 9.1 Liters 9.
KNOWING YOUR VEHICLE SAFETY FLUIDS, LUBRICANTS, AND GENUINE PARTS ENGINE Component Engine Coolant Engine Oil – 3.6L Engine STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 302 Engine Oil – 2.0L Diesel Engine Spark Plugs – 3.6L Engine Fuel Selection – 3.6L Engine Fuel Selection – 2.0L Diesel Engine Fluids, Lubricants, and Genuine Parts 50% mixture of demineralized water and PARAFLU UP* that meets FIAT Qualification 9.
CHASSIS Component Automatic Transmission (for versions/markets, where provided) Manual Transmission (for versions/markets, where provided) Wheel-Side Constant Velocity Joints Differential-Side Constant Velocity Joints Brake/Clutch Master Cylinder Power Steering Reservoir Windshield/Rear Window Washer Fluid Fluid, Lubricant, or Genuine Part TUTELA TRANSMISSION FORCE4 Totally synthetic lubricant that meets FIAT Classification 9.55550- AV4 Grade SAE 75W synthetic lubricant that meets Qualification FIAT 9.
ARRANGEMENTS FOR DEALING WITH THE VEHICLE AT THE END OF ITS LIFE FIAT has been committed for many years to safeguarding the environment through the constant improvement of its production processes and manufacturing products that are increasingly “eco-compatible”.
305
306
CONTENTS About Your Brakes . . . . . . . . . . . . . . . . . . . . 113,200 ABS (Anti-Lock Brake System) . . . . . . . . . . 113,114,229 Adding Engine Coolant (Antifreeze) . . . . . . . . . 281,282 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . . 278 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 299 Air Cleaner, Engine (Engine Air Cleaner Filter) . . . . . 274 Air Conditioner Maintenance . . . . . . .
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 308 Brake Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303 Brake System . . . . . . . . . . . . . . . . . . . . . . . . 113,284 Anti-Lock (ABS) . . . . . . . . . . . . . . . . . . . . 113,114 Fluid Check . . . . . . . . . . . . . . . . . . . . . . . 284,303 Master Cylinder . . . . . . . . . . . . . . . . . . . . . . . 284 Parking . . . . . . .
Disposal of Used Coolant . . . . . . . . . . . . . . . . . 283 Drain, Flush, and Refill . . . . . . . . . . . . . . . . . . . 281 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . 283 Points to Remember . . . . . . . . . . . . . . . . . . . . 283 Pressure Cap . . . . . . . . . . . . . . . . . . . . . . . . . 282 Radiator Cap . . . . . . . . . . . . . . . . . . . . . . . . . 282 Selection of Coolant (Antifreeze) . . . . . . 281,301,302 Temperature Gauge . . . . . . . . . . . . . . . . . . . .
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 310 Exhaust Gas Caution . . . . . . . . . . . . . . . . . 106,192 Fails to Start . . . . . . . . . . . . . . . . . . . . . . . . . . 197 Flooded, Starting . . . . . . . . . . . . . . . . . . . . . . . 197 Fuel Requirements . . . . . . . . . . . . . . . . . . . . . . 298 Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . . 231 Oil . . . . . . . . . .
Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Octane Rating . . . . . . . . . . . . . . . . . . . . . . 298,302 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . 298 Saver Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 302 Tank Capacity . . . . . . . . . . . . . . . . . . . . . . . . . 301 Fuel Optimizer . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Fuel Saver . . . . . . . . .
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 312 Instrument Panel and Controls . . . . . . . . . . . . . . . . . 6 Instrument Panel Cover . . . . . . . . . . . . . . . . . . . . 289 Instrument Panel Lens Cleaning . . . . . . . . . . . . . . . 289 Interior Appearance Care . . . . . . . . . . . . . . . . . . . 289 Interior Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . 254 Interior Lights . . .
Illuminated Entry . . . . . . . . . . . . . . . . . . . . . . . . 75 Instrument Cluster . . . . . . . . . . . . . . . . . . . 71,225 Intensity Control . . . . . . . . . . . . . . . . . . . . . . . . 74 Interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253 Lights On Reminder . . . . . . . . . . . . . . . . . . . . . . 72 Low Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7,21 Low Tire . . . . . . . . . . . .
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 314 Vanity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Mode Fuel Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Modifications/Alterations, Vehicle . . . . . . . . . . . . . . . 5 Monitor, Tire Pressure System . . . . . . . . . . . . . . . . 123 Multi-Function Control Lever . . . . . . . . . . . . . . . . .
Rear Drive Assembly . . . . . . . . . . . . . . . . . . . . . . 286 Rear Fog Lights . . . . . . . . . . . . . . . . . . . . . . . . . . 230 Rear Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Rear Park Sense System . . . . . . . . . . . . . . . . . . . . 129 Rear Seat, Folding . . . . . . . . . . . . . . . . . . . . . . . 49,54 Rear Window Defroster . . . . . . . . . . . . . . . . . . . . 80 Rear Window Features . . . . . . . . . . . . . . . . . . . . . 79 Rear Wiper/Washer . . . . . . .
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 316 Sentry Key Programming . . . . . . . . . . . . . . . . . . . . 12 Sentry Key Replacement . . . . . . . . . . . . . . . . . . . . 11 Service Engine Soon Light (Malfunction Indicator) . . . 225 Shoulder Belt Upper Anchorage . . . . . . . . . . . . . . 162 Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . . . . 159 Side Airbag . . . . . . . . . . .
Pressure Monitor System (TPMS) Radial . . . . . . . . . . . . . . . . . . Replacement . . . . . . . . . . . . . . Rotation . . . . . . . . . . . . . . . . Safety . . . . . . . . . . . . . . . . . . Spare Tire . . . . . . . . . . . . . . . Spinning . . . . . . . . . . . . . . . . . Trailer Towing . . . . . . . . . . . . . Tread Wear Indicators . . . . . . . To Open Hood . . . . . . . . . . . . . . Tongue Weight/Trailer Weight . . . . Towing . . . . . . . . . . . . . . . . . . . Disabled Vehicle . . . . . . .
KNOWING YOUR VEHICLE SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICING AND CARE TECHNICAL SPECIFICATIONS CONTENTS 318 Washers, Windshield . . . . . . . . . . . . . . . . . . 76,77,278 Washing Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . 287 Water Driving Through . . . . . . . . . . . . . . . . . . . . . . . 211 Wheel and Wheel Trim . . . . . . . . . . . . . . . . . . . . 288 Wheel and Wheel Trim Care . . . . . . . . . . . . . . . . 288 Wind Buffeting . . . . .
Notes
Notes
Notes
Notes
Notes
Notes Fiat Group Automobiles S.p.A. - Parts & Services - Technical Services - Service Engineering Largo Senatore G. Agnelli, 3 - 10040 Volvera - Torino (Italia) Print n. 603.81.
WHY CHOOSING GENUINE PARTS We really know your car because we invented, designed and built it: we really know every single detail. At Fiat Service authorised workshops you can find technicians directly trained by us, offering quality and professionalism for all service operations. Fiat workshops are always close to you for the regular servicing operations, season checks and practical recommendations by our experts.
F I A T F R E E M O N ENGLISH The data contained in this publication is intended merely as a guide. FIAT reserves the right to modify the models and versions described in this booklet at any time for technical and commercial reasons. If you have any further questions please consult your FIAT dealer. Printed in recycled paper without chlorine.