Instruction Manual

ManualsBrandsFIAT ManualsCarsIdea

143

CAR

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX

DASHBOARD

AND CONTROLS

SAFETY

DEVICES

CORRECT USE

OF THE CAR

WARNING

LIGHTS AND

MESSAGES

IN AN

EMERGENCY

fig. 14

F0H0164m

fig. 15

F0H0165m

fig. 16

F0H0166m

REFITTING THE STANDARD

WHEEL

Following the procedure described previ-

ously, raise the car and remove the spare

wheel.

For versions with steel rim

Proceed as follows:

❒

Make sure the contact surfaces be-

tween standard wheel and hub are

clean so that the fastening bolts will

not come loose;

❒

Fit the standard wheel by inserting the

first bolt in the hole closest to the in-

flation valve;

❒

Fit the wheel cap making the groove

(on the wheel cap) coincide with the

inflation valve and fit the other three

bolts;

❒

Using the wrench provided, tighten

the fastening bolts;

❒

Lower the car and remove the jack;

❒

Using the wrench provided, fully

tighten the bolts in the sequence

shown previously for the spare

wheel;

IMPORTANT Incorrect fitting may cause

the wheel cap to come off when the car is

travelling.

133-160 idea GB 1 ed 10-07-2008 8:30 Pagina 143