COP PUNTO POP GB:PUNTO UM GB 11-10-2011 13:54 Pagina 1 F I A T P U N T O ENGLISH The data contained in this publication is intended merely as a guide. FIAT reserves the right to modify the models and versions described in this booklet at any time for technical and commercial reasons. If you have any further questions please consult your FIAT dealer. Printed in recycled paper without chlorine.
COP PUNTO POP GB:PUNTO UM GB 11-10-2011 13:54 Pagina 2 WHY CHOOSING GENUINE PARTS We really know your car because we invented, designed and built it: we really know every single detail. At Fiat Service authorised workshops you can find technicians directly trained by us, offering quality and professionalism for all service operations. Fiat workshops are always close to you for the regular servicing operations, season checks and practical recommendations by our experts.
001-032 PUNTO POP 1ed EN.
001-032 PUNTO POP 1ed EN.qxd 3-10-2011 11:43 Pagina II HOW TO RECOGNISE GENUINE PARTS To recognise a Genuine Part, check that the component bears our brands, always clearly visible on Genuine Parts, from the braking system to windscreen wipers, from shock absorbers to air cleaner. All Genuine Parts undergo strict controls, both during design and manufacturing stages, by specialists using vanguard materials, to test the component reliability.
001-032 PUNTO POP 1ed EN.qxd 3-10-2011 11:43 Pagina 1 Dear Customer, Thank you for selecting Fiat and congratulations on your choice of a Fiat Punto. We have written this handbook to help you get to know all the features of your car and use it in the best possible way. You should read it right through before taking to the road for the first time. You will find information, tips and important warnings regarding the driving of your car to help you get the most from the technological features of your Fiat.
001-032 PUNTO POP 1ed EN.qxd 3-10-2011 11:43 Pagina 2 READ THIS CAREFULLY! REFUELLING K Petrol engines: refuel only with unleaded petrol with an octane rating (RON) of no less than 95 conforming to the European specification EN228. Diesel engines: refuel only with diesel fuel conforming to the European specification EN590. The use of other products or mixtures may damage the engine beyond repair and consequently invalidate the warranty, depending on the damage caused.
001-032 PUNTO POP 1ed EN.qxd 3-10-2011 11:43 Pagina 3 ELECTRICAL ACCESSORIES If, after buying the car, you decide to add electrical accessories (with the risk of gradually draining the battery), visit a Fiat Dealership. They can calculate the overall electrical requirement and check that the car’s electrical system can support the required load. CODE card Keep it in a safe place, not in the car. You should have the electronic code from the CODE card with you at all times.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 001-032 PUNTO POP 1ed EN.qxd 4 3-10-2011 11:43 Pagina 4 CONTROLS AND DEVICES DASHBOARD ...................................................................... SYMBOLS ............................................................................... THE FIAT CODE SYSTEM ................................................. THE KEYS ................................
001-032 PUNTO POP 1ed EN.qxd 3-10-2011 11:43 Pagina 5 CONTROLS AND DEVICES DASHBOARD 1. Adjustable side air vents – 2. Fixed side air vents – 3. Left-hand lever: exterior lights control – 4. Instrument panel – 5. Righthand lever: front and rear windscreen wiper controls, trip computer – 6. Controls on dashboard – 7. Adjustable central air vents – 8. Fixed upper air vent – 9. Front airbag, passenger side – 10. Glove compartment – 11. Sound system (for versions/markets where provided) – 12.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 001-032 PUNTO POP 1ed EN.qxd 6 3-10-2011 11:43 Pagina 6 SYMBOLS THE FIAT CODE SYSTEM Special coloured labels have been attached near or actually on some of the components of your Fiat Punto. These labels bear symbols that remind you of the precautions to be taken as regards that particular component.
If the code has not been recognised correctly, the warning light Y turns on accompanied by the related message on the display. ❒ If the warning light Y stays on, contact a Fiat Dealership. The electronic components inside the key may be damaged if the key is subjected to sharp knocks. CONTROLS AND DEVICES SAFETY ❒ If the warning light Y turns on, this means that the system is running a selftest (for example for a voltage drop).
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 001-032 PUNTO POP 1ed EN.qxd 8 3-10-2011 11:43 Pagina 8 THE KEYS CODE CARD fig. 3 (for versions/markets, where provided) The car is delivered with two copies of the ignition key and with the CODE card which bears the following: A the electronic code; B the mechanical key code to be given to the Fiat Dealership when ordering duplicate keys.
10-10-2011 10:24 Pagina 9 WARNING LIGHTS AND MESSAGES Once doors are locked, if one or more doors or the boot are not closed correctly, the LED and direction indicators start flashing quickly. REPLACING THE BATTERY OF THE KEY WITH REMOTE CONTROL fig.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 001-032 PUNTO POP 1ed EN.qxd 10 3-10-2011 11:43 Pagina 10 Requesting additional remote controls ALARM The system acknowledges up to 8 remote controls. Should a new remote control be necessary, contact a Fiat Dealership, taking with you the CODE card, a personal identity document and the car’s ownership documents.
Dead Lock activation (*) Unlocking the boot Opening windows (*) Closing windows (*) Turn key anticlockwise (driver’s side) Turn key clockwise (driver’s side) – – – – Turn key anticlockwise (driver’s side) Turn key clockwise (driver’s side) – – – – Press briefly button Ë Press briefly button Á Press twice button Á Press briefly button R Hold down button Ë for more than two seconds) Hold down button Á for more than two seconds) Direction indicators flashing (only for key with remote cont
3-10-2011 11:43 STEERING LOCK The key can be turned to 3 different positions fig. 9: Engagement STARTING AND DRIVING SERVICE AND CARE IN AN EMERGENCY The ignition device is fitted with an electronic safety system that, in the event the engine fails to start, turns back the ignition key to STOP before repeating the starting operation. INDEX TECHNICAL SPECIFICATIONS When the key is in position STOP, remove it and turn the steering wheel until it locks.
A Speedometer B Fuel level gauge with reserve warning light C Engine coolant temperature gauge and excessive temperature warning light D Rev counter WARNING LIGHTS AND MESSAGES E Digital display F0M0535m fig.
3-10-2011 11:43 Pagina 14 INSTRUMENTS Instrument background colour and type may vary according to the version. INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 001-032 PUNTO POP 1ed EN.qxd 14 fig. 12 F0M0405m fig. 13 F0M0406m SPEEDOMETER fig. 12 REV COUNTER fig. 13 This shows the speed of the vehicle. The rev counter shows the number of engine revolutions per minute.
FUEL LEVEL GAUGE fig. 14 This shows the amount of fuel left in the tank. E tank empty. F full tank. The reserve warning light A turns on to indicate that approximately 7 litres of fuel are left in the tank. Do not travel with the fuel tank almost empty: the gaps in fuel delivery could damage the catalyst. See the description in the “Refuelling” paragraph. IMPORTANT The needle will point to E and warning light A will blink to indicate a fault in the system.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 001-032 PUNTO POP 1ed EN.qxd 16 3-10-2011 11:43 Pagina 16 DIGITAL DISPLAY STANDARD SCREEN fig. 16 The standard screen shows the following information: A Headlamp alignment position (only with dipped headlamps on). B Time (always displayed, even with key extracted and front doors closed) fig.
– press briefly the MENU ESC button to store the new setting and go back to the previous menu option. Selecting “Set Clock” – briefly press the MENU ESC button to select the first value to change (hours); – press the + and – buttons (with single presses) to select the new setting; – briefly press the MENU ESC button to store the new setting and go to the next setup menu option (minutes); – after setting the values with the same procedure, go back to the previous menu item. The setup menu page is timed.
3-10-2011 CONTROLS AND DEVICES 001-032 PUNTO POP 1ed EN.qxd 11:43 Pagina 18 STARTING AND DRIVING SAFETY On the standard screen, briefly press MENU ESC to start browsing. Press + or – to browse within the menu. NB For safety reasons, only the short menu may be accessed while the car is moving (“SPEEd” setting). Stop the car to access the full menu.
– press + or – to activate (On) or deactivate (Off) the speed limit; – if the function is on, press + or – to select the required speed limit and then press MENU ESC to confirm; NB The speed may be set in the range from 30 to 200 km/h, or from 20 to 125 mph according to the previously chosen unit (see “Setting the distance unit (Unit)” below). The setting will increase/decrease by five units each time +/– is pressed. Hold down +/– to increase/decrease the setting rapidly.
– press + or – to select the required distance unit. IN AN EMERGENCY SERVICE AND CARE INDEX TECHNICAL SPECIFICATIONS 20 – briefly press MENU ESC to return to the menu screen or hold the button down to return to the standard screen without saving.
11:43 Pagina 21 CONTROLS AND DEVICES MULTIFUNCTION DISPLAY (for versions/markets, where provided) NB When one of the front doors is opened, the display turns on and shows for a few seconds the time and distance covered. + To scroll the displayed menu and the related options upwards or to increase the displayed value. MENU Press briefly to display the menu ESC and/or go to the next screen or confirm your choice. Hold down to go back to the standard screen.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 001-032 PUNTO POP 1ed EN.qxd 22 3-10-2011 11:43 SETUP MENU fig. 20 The menu comprises a series of functions arranged in a circle which can be selected through the + and – buttons to access the different operations and settings described in the following paragraphs. A submenu is provided for some items (clock and unit setting).
– SET TIME To set the desired speed limit, proceed as follows: – SET DATE – briefly press MENU ESC – the display will show the wording (Speed Buzz); – FIRST PAGE (for versions/markets where provided) – SEE RADIO – AUTOCLOSE – UNITS OF MEASUREMENT – LANGUAGE – WARNING VOLUME – BUTTON VOLUME – SERVICE – AIRBAG/PASSENGER BAG – DAYTIME RUNNING LIGHTS (for versions/markets where provided) – EXIT MENU – press + or – to select speed limit activation (On) or deactivation (Off); – if the function is on, press +
3-10-2011 11:43 SAFETY – press the MENU ESC button briefly: the display will show “On” or “Off” flashing depending on the previous setting; – briefly press the MENU ESC button to go back to the menu screen or hold the button down to go back to the standard screen without saving. INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY This function activates/deactivates the corner lights.
To make your choice, proceed as follows: – briefly press MENU ESC – “Initial page” will appear on the display; – briefly press MENU ESC once again to show the display options “Date” and “Engine info”; – press + or – to select the information you wish to see on the main page of the display; – briefly press MENU ESC to return to the menu screen or hold the button down to return to the standard screen without saving.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 001-032 PUNTO POP 1ed EN.qxd 26 3-10-2011 11:43 Audio information (See sound system) With this function the display shows information relevant to the sound system.
– press + or – to make your choice; When you have made the adjustment, briefly press MENU ESC to go back to the sub-menu screen or hold the button down to go back to the main menu without saving. – hold down MENU ESC again to go back to the standard screen or main menu, depending on where you are in the menu.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 001-032 PUNTO POP 1ed EN.qxd 28 3-10-2011 11:43 Adjusting the button volume (Button Vol.) This function may be used to adjust (over 8 levels) the volume of the noise made when the MENU ESC, + and – buttons are pressed.
F0M1011g ❒ briefly press MENU ESC to confirm setting and go back to the menu screen or hold the button down to go back to the standard screen without saving.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 001-032 PUNTO POP 1ed EN.qxd 30 3-10-2011 11:43 TRIP COMPUTER Introduction The “Trip computer” is used to display information on car operation when the key is turned to MAR. This function allows you to define two separate trips called “Trip A” and “Trip B” for monitoring the car’s “complete journey” in a reciprocally independent manner.
IMPORTANT The reset operation when “Trip B” details are being displayed resets only the information associated with this function. CONTROLS AND DEVICES With ignition at MAR, press and hold the TRIP button for over 2 seconds to reset. To quit the Trip function: keep MENU ESC pressed for over 2 seconds. SAFETY Trip Exit STARTING AND DRIVING IMPORTANT The reset operation when “Trip A” details are being displayed resets only the information associated with this function.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 001-032 PUNTO POP 1ed EN.qxd 32 3-10-2011 11:44 Pagina 32 FRONTSEATS WARNING All adjustments must be made with the car stationary. fig. 22 The fabric upholstery of your car is designed to withstand normal wear and tear for a long time. Some precautions are needed though.
F0M0058m Seat heating fig. 24 (for versions/markets, where provided) With the key turned to MAR, press button F to switch the function on/off. When the function is enabled, the LED on the button turns on. IMPORTANT Front seat heating control is linked to a thermostat, automatically deactivating heating when the preset temperature is reached. SAFETY STARTING AND DRIVING fig. 24 WARNING LIGHTS AND MESSAGES To fold the rear seats, refer to the “Extending the boot” paragraph in this section.
30-09-2011 10:17 To adjust head restraints, proceed as follows: INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES SAFETY FRONT HEAD RESTRAINTS fig. 25 On certain versions the head restraints are adjustable in height and they lock automatically in the required position. 34 Pagina 34 HEAD RESTRAINTS STARTING AND DRIVING CONTROLS AND DEVICES 033-069 PUNTO POP 1ed EN ❒ upwards adjustment: lift the head restraint until it locks. fig. 25 F0M0025m fig.
The mirror is fitted with a safety device that causes its release in the event of a violent impact with the passenger. To carry out the adjustment, proceed as follows: ❒ release lever A-fig. 27 by pushing it forwards (position 1); ❒ adjust the steering wheel; ❒ lock lever A by pulling it towards the steering wheel (position 2). fig. 27 F0M0610m WARNING Any adjustment of the steering wheel position must be carried out only with the car stationary and the engine turned off.
033-069 PUNTO POP 1ed EN 30-09-2011 10:17 Pagina 36 CONTROLS AND DEVICES Folding SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY When required (for example when the shape causes difficulty in narrow spaces), it is possible to fold the mirrors by moving them from position 1-fig. 30 to position 2. fig. 28 F0M0028m fig. 29 F0M0030m The mirror can be adjusted to two different positions (normal or antiglare) by using lever A.
30-09-2011 10:17 Pagina 37 HEATING AND VENTILATION SYSTEM 1. Upper fixed vent – 2. Adjustable central vents – 3. Fixed side vents – 4. Adjustable side vents – 5. Lower vents for front seats 6. Lower vents for rear seats INDEX fig.
30-09-2011 10:17 Pagina 38 fig. 32 F0M0033m fig. 33 F0M0034m INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 033-069 PUNTO POP 1ed EN 38 F0M0035m fig. 34 ADJUSTABLE SIDE AND CENTRAL VENTS fig. 32-33 CONTROLS fig. 34 A Fixed vent for side windows. B Adjustable side vents. Knob A regulates the air temperature (mixing hot and cold air) C Adjustable central vents.
© for heating when the outside temper- ature is very low: to direct as much air as possible to the feet; ® to warm the feet and, at the same time, demist the windscreen; - to quickly de-mist the windscreen.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 033-069 PUNTO POP 1ed EN 40 30-09-2011 10:17 FRONT FAST DEMISTING/ DEFROSTING (WINDSCREEN AND SIDE WINDOWS) Proceed as follows: ❒ turn knob A to red section; ❒ turn air internal recirculation off by pressing button D (button LED off); ❒ turn knob C to -; ❒ turn knob B to 4 - (max. fan speed).
CONTROLS fig. 36 Knob A regulates the air temperature (mixing hot and cold air) Red section = hot air Blue section = cold air Knob B activates/adjusts the fan p 0 = fan off 1-2-3 = ventilation speed 4 - = max. fan speed CONTROLS AND DEVICES (for versions/markets, where provided) SAFETY Do not use the air internal recirculation function on rainy/cold days as it would considerably increase the possibility of the windows misting up.
033-069 PUNTO POP 1ed EN 30-09-2011 10:17 Pagina 42 SAFETY CONTROLS AND DEVICES Button D turns air recirculation on/off Press the button (button LED on) to turn the air internal recirculation on. Press the button again (button LED off) to turn the air internal recirculation off.
❒ turn knob C to ¶; ❒ turn knob B to the required speed. ❒ turn knob A to the blue section; ❒ turn air internal recirculation off by pressing button D (button LED off); ❒ turn air internal recirculation on by pressing button D (button LED on); ❒ turn knob C to ¶; ❒ press button E to turn the climate control system on; the LED on button E will come on; ❒ turn knob B to 4 - (max. fan speed). ❒ turn knob B to reduce the fan speed.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 033-069 PUNTO POP 1ed EN 44 30-09-2011 10:17 Pagina 44 PASSENGER COMPARTMENT HEATING RAPID PASSENGER COMPARTMENT HEATING Proceed as follows: For the rapid heating of the passenger compartment, proceed as follows: ❒ turn knob A to red section; ❒ turn knob C to the required symbol; ❒ turn knob B to the required speed.
CONTROLS AND DEVICES SAFETY In the event of considerable external moisture and/or rain and/or large differences in temperature inside and outside the passenger compartment, perform the following preventive window demisting procedure: ❒ turn air internal recirculation off by pressing button D so the button LED goes out; ❒ turn knob C to - or to ® if the windows do not demist; ❒ turn knob B to 2nd speed.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 033-069 PUNTO POP 1ed EN 46 30-09-2011 10:17 INTERNAL AIR INTERNAL RECIRCULATION ACTIVATION Press • so that the button LED is on. It is advisable to switch the internal air internal recirculation on while standing in queues or in tunnels to prevent the introduction of polluted air.
The external lights can be switched on only when the key is turned to MAR. The warning light 1 on the instrument panel will come on. The instrument panel and the various controls on the dashboard will be lit up when the exterior lights are switched on. To turn the main beams off, pull the stalk towards the steering wheel again (dipped beams will come back on). DAYTIME RUNNING LIGHTS (D.R.L.) fig.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 033-069 PUNTO POP 1ed EN 48 30-09-2011 10:17 Pagina 48 DIRECTION INDICATORS When the stalk is moved, the light 3 on the instrument panel will light up and the corresponding message will appear in the display (see “Warning lights and messages”) as long as the function is on.
This can work only when the key is turned to MAR. The twist switch on the right stalk can be moved to four different positions: O windscreen wiper off; ≤ intermittent operation; ≥ continuous slow operation; ¥ continuous fast operation. Move the stalk to position A (temporary) to limit operation to the time for which the stalk is held in this position. When released, the stalk returns to its default position, automatically stopping the wiper. fig.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 033-069 PUNTO POP 1ed EN 50 30-09-2011 10:17 REAR WINDOW WASHER/WIPER fig. 41 This can work only when the key is turned to MAR. The function stops when the stalk is released.
Pagina 51 CONTROLS AND DEVICES CEILING COURTESY LIGHTS Switch A-fig. 44 turns these lights on/off. With switch A-fig. 44 in a central position, lights C and D will turn on/off when opening/closing the front doors. With switch A-fig. 44 pressed on the left side, lights C and D will always stay off. With switch A-fig. 44 pressed on the right side, lights C and D will always stay on. The lights switch on/off progressively. fig. 43 F0M0067m Switch B-fig.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 033-069 PUNTO POP 1ed EN 52 30-09-2011 10:17 Pagina 52 CAUTION Before getting out of the car, make sure both switches are in the central position; when the doors are closed, the lights switch off to prevent the battery from running down.
Pagina 53 CONTROLS AND DEVICES CONTROLS HAZARD WARNING LIGHTS fig. 45 The use of hazard lights is governed by the highway code of the country you are in. Keep to the rules. Emergency braking During emergency braking, the hazard warning lights come on automatically and lights Î and ¥ on the panel come on at the same time. The function switches off automatically when the nature of the braking changes. This function complies with the relevant legal regulations currently in force. fig.
30-09-2011 10:17 Pagina 54 INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 033-069 PUNTO POP 1ed EN 54 fig. 47 F0M0071m fig. 48 F0M0617m fig. 49 F0M0036m REAR FOG LAMPS fig. 47 PARKING LIGHTS HEATED REAR WINDOW fig. 49 Press button 4 to turn these lights on with the dipped beam headlights or the front fog lights (for versions/markets, where provided) switched on.
❒ cut-off of fuel supply with consequent switching off of the engine; ❒ automatic door unlocking; fig. 50 F0M0618m DOOR LOCKING fig. 50 To lock all doors at the same time, press button A, located on the central console control panel, regardless of the position of the ignition key. ❒ switching on of all interior lights. When the system has been triggered, the message “Fuel cut off, see handbook” is displayed.
30-09-2011 10:17 The following procedure should be carried out to restore the correct operation of the vehicle: ❒ turn the ignition key to MAR; ❒ activate the right-hand indicator; ❒ deactivate the right-hand indicator; ❒ activate the left-hand indicator; ❒ deactivate the left-hand indicator; ❒ activate the right-hand indicator; ❒ deactivate the right-hand indicator; ❒ activate the left-hand indicator; ❒ deactivate the left-hand indicator; ❒ turn the key to STOP.
30-09-2011 10:17 Pagina 57 F0M0245m FRONT ARMREST WITH GLOVE COMPARTMENT (for versions/markets, where provided) Certain versions are fitted with an armrest A-fig. 67 between the front seats. To use it as an armrest, push it down as shown in fig. 57. fig. 55 F0M0080m Glove compartment B-fig. 54 is located in the middle of the dashboard. Glove compartment B can be removed to install a sound system. CENTRAL CONSOLE GLOVE COMPARTMENT Compartment A-fig.
30-09-2011 10:17 Pagina 58 fig. 59 F0M0082m IN AN EMERGENCY SERVICE AND CARE INDEX TECHNICAL SPECIFICATIONS 58 fig. 61 F0M0083m CARD HOLDER – CD HOLDER fig. 61 WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 033-069 PUNTO POP 1ed EN The central console features slots for telephone cards CDs, magnetic cards or motorway toll tickets. fig. 62 F0M0084m CIGARETTE LIGHTER fig. 62 This is located on the central console in front of the handbrake.
30-09-2011 10:17 Pagina 59 fig. 66 F0M0249m fig. 66a F0U0530m SUN VISORS fig. 65 WARNING LIGHTS AND MESSAGES These are located at the sides of the rear view mirror. They may be positioned at the front and to the side. A mirror can be applied to the back of the driver-side sun visor: fig. 64 F0M0116m ASHTRAY fig. 63-64 The ashtray is a removable plastic box that can be fitted into the cup/can holders on the central console.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 033-069 PUNTO POP 1ed EN 60 30-09-2011 10:17 Pagina 60 DOORS CENTRAL DOOR LOCKING/ UNLOCKING SYSTEM LOCKING FROM THE OUTSIDE With the doors closed, press button Á on the remote control fig. 70 or insert the key into the lock of the door on the driver’s side and turn it clockwise. Locking is signalled by the LED on button A-fig. 72 coming on.
IMPORTANT With central locking on, pulling the internal handle of one of the front doors will unlock that door. Individual doors can be unlocked by pulling the internal handle of one of the rear doors. If a power supply is not present (blown fuse, battery disconnected, etc.) it is, however, possible to lock the doors manually.
30-09-2011 10:17 CONTROLS AND DEVICES 033-069 PUNTO POP 1ed EN WARNING Always use this device when transporting children. SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICE AND CARE INDEX TECHNICAL SPECIFICATIONS 62 Pagina 62 fig. 73 F0M0411m CHILD LOCK (5-door versions) fig. 73 WARNING After engaging the child lock on both rear doors, check for proper engagement by trying to open a rear door with the internal handle.
A opening/closing of the left front window; B opening/closing the right front window. fig. 75 F0M0136m Continuous automatic operation The car has an automatic setting to raise and lower the driver-side front window. IMPORTANT In the event that the anticrushing function is activated 5 times in only 1 minute, the system will automatically enter the “recovery” mode (self-protection). This condition is apparent from the window closing in stages. SAFETY Two switches fig.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 033-069 PUNTO POP 1ed EN 64 30-09-2011 10:17 On such occasions, it is necessary to carry out the system restore procedure, acting as follows: ❒ open the windows; or ❒ turn the ignition key to STOP and then to MAR. If no malfunction is present, the window returns to its normal operation automatically.
Pagina 65 WARNING When travelling, do not put any object on the parcel shelf because they can injure passengers in the event of an accident or sudden braking. SAFETY fig. 79 F0M0094m fig. 78 F0M0425m fig. 80 F0M0095m STARTING AND DRIVING F0M0654m WARNING LIGHTS AND MESSAGES WARNING When using the boot, never exceed the maximum admissible loads (see section “Technical specifications”).
30-09-2011 10:17 Pagina 66 INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 033-069 PUNTO POP 1ed EN 66 fig. 81 F0M0096m fig. 82 F0M0097m ❒ tilt the rear seats fully forward (see paragraph “Extending the boot” in this section); Tilting the whole rear seat forwards gives maximum loading volume.
30-09-2011 10:17 Pagina 67 REMOVING THE PARCEL SHELF Raise the backrests and push them back until hearing the locking click of both retainers. To remove the parcel shelf in order to extend the boot: release the upper ends A-fig. 86 by removing the eyelets from the pins, unhook and swivel the parcel shelf in its seat and then release both pins fig. 87 from the side holes. Once removed, the parcel shelf can be positioned between the back of the front seats and the folded cushion of the rear seat fig. 88.
CONTROLS AND DEVICES 033-069 PUNTO POP 1ed EN 30-09-2011 10:17 Pagina 68 BONNET OPENING INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY Proceed as follows: 68 ❒ pull the lever fig. 89 in the direction of the arrow; ❒ pull catch A-fig. 90 as shown in the diagram; ❒ lift the bonnet and at the same time release the support prop from its locking device D-fig. 91, then insert the end C-fig. 92 into hole E on the bonnet. fig.
CONTROLS AND DEVICES ROOF RACK/SKI RACK 3-door versions F0M0102m 5-door versions The front hooks are located at points A-fig. 93. WARNING If the supporting rod is not positioned correctly, the bonnet may fall violently. WARNING Perform these operations only when the car is stationary. The rear hooks are set at points B and are marked by a groove on the upper part of the door frame. WARNING After travelling for a short distance, check that the fastening screws are correctly tightened.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 070-090 PUNTO POP 1ed EN 70 30-09-2011 10:18 Pagina 70 HEADLIGHTS Headlight alignment adjustment fig. 94 LIGHT BEAM DIRECTION To adjust, press buttons Ò and Ó on the control panel. The correct direction of the headlights is essential for the comfort and safety of the driver and other road users.
HEADLIGHT BEAM ADJUSTMENT ABROAD fig. 95-96 The dipped headlights are adjusted to work in the country where the vehicle was originally purchased. In countries where vehicles are driven on the other side of the road, the beams are aligned by applying a specially designed adhesive film in order not to dazzle the vehicles travelling in the opposite direction. Such film is provided by Lineaccessori Fiat and is available at Fiat Dealerships. F0M0657m SERVICE AND CARE IN AN EMERGENCY fig.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 070-090 PUNTO POP 1ed EN 72 30-09-2011 10:18 ABS SYSTEM If you have never driven a vehicle with ABS before, it is advisable to perform a few tests on slippery ground, naturally in conditions of safety and respecting the highway code of the country where you are driving. Read the following information carefully.
WARNING If only the x warning light on the instrument panel lights up (together with a message in the multifunction display, for versions/markets, where provided) stop the vehicle immediately and contact the nearest Fiat Dealership. Fluid leaking from the hydraulic system will compromise the operation of the braking system, whether it is of the conventional type or with ABS. This is an electronic system that controls car stability in the event of tyre grip loss, helping to maintain directional control.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 070-090 PUNTO POP 1ed EN 74 30-09-2011 10:18 SYSTEM ACTIVATION The ESP system is automatically activated when the car is started and cannot be de-activated. FAILURE INDICATIONS Pagina 74 WARNING Do not take unnecessary risks, even if your vehicle is fitted with an ESP system.
❒ if the skidding involves only one driving wheel, the ASR system cuts in by automatically braking the wheel that is sliding. The ASR system is particularly helpful in the following circumstances: ❒ skidding of the inner wheel when cornering due to the effect of dynamic load changes or excessive acceleration; ❒ too much power transmitted to the wheels in relation to the conditions of the road surface; ❒ acceleration on slippery, snowy or icy surfaces; ❒ loss of grip on a wet surface (aquaplaning).
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 070-090 PUNTO POP 1ed EN 76 30-09-2011 10:18 WARNING Do not take unnecessary risks, even if your vehicle is fitted with this system. Your driving style must always be suited to the road conditions, visibility and traffic. The driver is always responsible for road safety.
fig. 98 F0M0621m ACTIVATION/DEACTIVATION (CITY function) To activate/deactivate the function, press the button on the dashboard. Activation is indicated by: ❒ the word CITY on the instrument panel (for versions with multifunction display); ❒ the word CITY lit up on the button after it has been pressed fig. 98. SAFETY STARTING AND DRIVING For the Sport version, this function guarantees improved driving comfort because the accelerator pedal is better calibrated for gradual acceleration/deceleration.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 070-090 PUNTO POP 1ed EN 78 30-09-2011 10:18 FAILURE INDICATIONS Any failure of the electric power steering system is indicated by instrument panel warning light g coming on together with a message on the multifunction display (for versions/markets, where provided) (see section “Warning lights and messages”).
FOREWORD Press the clutch pedal to allow the engine to be restarted. The Start&Stop device automatically stops the engine each time the vehicle is stationary and starts it again when the driver wants to move off. With Dualogic gearbox (for versions/markets, where provided) This improves the efficiency of the vehicle by reducing fuel consumption, the emission of harmful gases and noise pollution. The system is activated each time the car is started.
070-090 PUNTO POP 1ed EN 11-10-2011 13:37 Pagina 80 CONTROLS AND DEVICES ❒ reverse gear engaged (for example, during parking manoeuvres); INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY ❒ automatic climate control, if a comfortable temperature has not yet been reached or MAX – DEF function enabled; 80 ❒ during the first period of use, to initialize the system. fig. 100 F0M0506m fig.
❒ battery not sufficiently charged; ❒ windscreen wipers working at maximum speed; ❒ extreme braking system pressure, e.g. following the brake pedal being pressed repeatedly; ❒ car moving around, for example when driving on hilly roads; ❒ stopping the engine through the Start&Stop system for more than about three minutes. ❒ automatic climate control system for establishing a comfortable temperature or enabling the MAX – DEF function.
30-09-2011 10:18 CONTROLS AND DEVICES 070-090 PUNTO POP 1ed EN WARNING When replacing the battery, always go to a Fiat Dealership. Replace the battery using a new one of the same type (HEAVY DUTY) and having the same specifications. SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICE AND CARE INDEX TECHNICAL SPECIFICATIONS 82 Pagina 82 fig. 103 F0M0623m fig. 104 F0M0658m CAR INACTIVITY fig. 103 EMERGENCY STARTING fig.
F0M0511m WARNING For cars with a robotised transmission, if the engine cuts out automatically on a gradient, it is advisable to restart the engine by moving the gear lever towards (+) or (-) without releasing the brake pedal.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 070-090 PUNTO POP 1ed EN 84 30-09-2011 10:18 GEAR SHIFT INDICATOR SYSTEM (for versions/markets, where provided) The “GSI” system (Gear Shift Indicator) advises the driver to change gear via a signal on the instrument panel (see fig. 108). Through the GSI, where provided, the driver is advised that changing gear will reduce fuel consumption.
SOUND SYSTEM WARNING For connection to the preset cables, contact a Fiat Dealership to prevent any problem that could impair car safety. (for versions/markets, where provided) Sound system installation The sound system must be installed in the place occupied by the central storage compartment because this is where you will find the preset cables. To extract the compartment, press in the points shown in the diagram fig. 109 corresponding to the retainer systems.
30-09-2011 10:18 SAFETY SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES Install the navigation system by inserting the dedicated support bracket into the housing shown in fig. 110. INDEX TECHNICAL SPECIFICATIONS ACCESSORIES PURCHASED BY THE OWNER (for versions/markets, where provided) On cars equipped with the Blue&Me™ system, there may be (on request) capacity to install the satellite navigation system, which is available from Lineaccessori Fiat.
Fiat Auto S.p.A. authorises the installation of transceiving devices provided that they are installed by a specialised centre according to rules of good engineering practice in compliance with the manufacturer’s instructions. IMPORTANT Traffic police may not allow the car on the road if devices have been installed which modify the features of the car. This may also cause invalidation of warranty in relation to faults caused by the change or either directly or indirectly related to it. Fiat Auto S.p.A.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 070-090 PUNTO POP 1ed EN 88 30-09-2011 10:18 Pagina 88 REFUELLING THE CAR DIESEL ENGINES PETROL ENGINES Use only unleaded petrol. If the outside temperature is very low, the diesel thickens due to the formation of paraffin clots and could clog the diesel fuel filter.
❒ Lambda sensors; fig. 111 ❒ fuel evaporation prevention system. F0M0138m FUEL TANK CAP fig. 111 Filling the tank To carry out refuelling, open lid A and unscrew cap B; the cap is fitted with a device C which fastens it to the lid so it cannot be mislaid. To fill the tank completely, top up twice after the first click of the trigger. Further top ups could cause faults in the fuel supply system.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 070-090 PUNTO POP 1ed EN 90 30-09-2011 10:18 WARNING The diesel particulate filter (DPF) (for versions/markets, where provided) reaches high temperatures during normal operation. Do not park the vehicle on grass, dry leaves, pine needles or other flammable material: fire hazard.
93 PRETENSIONERS ................................................................ 94 CARRYING CHILDREN SAFELY ..................................... 97 PRESETTING FOR MOUNTING THE “UNIVERSAL ISOFIX” CHILD RESTRAINT SYSTEM ..... 101 FRONT AIRBAGS ................................................................ 103 SIDE AIRBAGS ...................................................................... 105 SAFETY SBR SYSTEM ..........................................................................
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 091-108 PUNTO POP 1ed EN 92 16-08-2011 14:11 Pagina 92 SEAT BELTS USING THE SEAT BELTS fig. 1 The belt should be worn keeping the torso straight and rested against the seat back. To fasten the seat belts, hold the tongue A and insert it into the buckle B, until hearing the locking click.
IMPORTANT The back rest is correctly locked into place when the red band next to the backrest release handles fig. 4 disappears. This red band indicates that the backrest is not secured. When returning the backrest to its normal position, make sure it is correctly fastened and you hear the lock click. IMPORTANT After putting the seats back to their normal position, restore the seat belt position to make them ready for use.
16-08-2011 14:11 PRETENSIONERS STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IMPORTANT To obtain the highest degree of protection from the action of the pretensioning device, wear the seat belt tight to the chest and pelvis. A slight amount of smoke may be detected during operation of the pretensioners. This smoke is not harmful and does not indicate a fire. The pretensioner does not require any maintenance or lubrication.
16-08-2011 14:11 Pagina 95 F0M0045m Of course, mothers-to-be must position the lower part of the belt very low down so that it passes over the pelvis and under the abdomen fig. 5. WARNING The belt must not be twisted. The upper part must cross the shoulder and the chest diagonally. The lower part must adhere to the hips fig. 6, not to the abdomen. Do not use devices (clips, etc.) to hold the seat belt away from your body.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 091-108 PUNTO POP 1ed EN 96 16-08-2011 14:11 WARNING For maximum safety, keep the back of your seat upright, lean back into it and make sure the seat belt fits closely across your chest and hips.
This prescription is compulsory in all EU countries pursuant to Directive 2003/20/EC. Compared with an adult, a child’s head is larger and heavier in proportion to his/her body and the child’s muscular and bone structures are not fully developed. For this reason, they require restraint systems which are different from those used by adults to protect them in the event of an accident.
16-08-2011 14:11 Pagina 98 fig. 8 F0M0046m Babies up to 13 kg must be carried facing backwards on a cradle seat, which, by supporting the head, does not induce stress on the neck in the event of sharp deceleration. The cradle is held in place by the car seat belts fig. 8 and in turn it must restrain the child with its own belts.
CONTROLS AND DEVICES SAFETY fig. 11 F0M0049m GROUP 2 GROUP 3 Starting from 15 kg to 25 kg in weight, children may be restrained directly by the car belts fig. 10. The only function of the seat is to position the child correctly in relation to the belts, so that the diagonal part adheres to the chest and not to the neck and that the horizontal part fits over the child’s hips and not the abdomen. For children between 22 kg and 36 kg, there are boosters allowing the seatbelt to fit correctly.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 091-108 PUNTO POP 1ed EN 100 16-08-2011 14:11 Pagina 100 SUITABILITY OF PASSENGER SEATS FOR CHILD SEAT USE The car complies with the new European Directive 2000/3/EC which governs the arrangement possibilities for child seats on the various seats of the car as shown in the following table: Weight range Front passenger Rear passenger Central rear passen
CONTROLS AND DEVICES “UNIVERSAL ISOFIX” CHILD RESTRAINT ASSEMBLY SETUP Remember that, in the case of Universal Isofix child seats, you can use all those seats bearing the marking ECE R44/03 Universal Isofix. STARTING AND DRIVING WARNING LIGHTS AND MESSAGES Due to its different attachment system, the Universal Isofix child seat must be anchored to the special low metal rings Afig. 13, located between the backrest and rear cushion.
091-108 PUNTO POP 1ed EN 16-08-2011 14:11 CONTROLS AND DEVICES PASSENGER SEAT COMPLIANCE FOR USING UNIVERSAL ISOFIX CHILD SEATS SAFETY The table below shows the different installation possibilities of Universal Isofix restraint systems on the seats fitted with Isofix fasteners, in accordance with European standard ECE 16. Weight group fig.
Non-activation in other types of crash (side-on collisions, rear shunts, roll-overs, etc.) is therefore not a sign of system malfunction. An electronic control unit causes the bag to inflate in the event of a head-on crash. The bag will inflate instantaneously, placing itself between the front occupant’s body and the structures which could cause injury. It will deflate immediately afterwards.
16-08-2011 14:11 Pagina 104 INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 091-108 PUNTO POP 1ed EN 104 fig. 15 F0M0627m fig. 16 F0M0053m FRONT AIRBAG ON DRIVER’S SIDE fig. 15 FRONT AIRBAG ON PASSENGER’S SIDE fig. 16 This consists of an instant-inflating bag contained in a special compartment in the centre of the steering wheel.
WARNING To manually deactivate the passenger’s front and side chest/pelvis airbags (for versions/markets, where provided), refer to paragraphs “Digital display” and “Multifunction display” in the section “Dashboard and controls”. Side airbags (for versions/markets, where provided) protect car occupants from side-on crashes of medium/high severity by placing the bag between the occupant and the internal parts of the side structure of the car.
091-108 PUNTO POP 1ed EN 16-08-2011 14:11 CONTROLS AND DEVICES IMPORTANT The front airbags and/or side bags may be deployed if the car is subject to heavy knocks involving the underbody area, such as violent shocks against steps, kerbs or low obstacles, the car falling into big holes or hollows in the road. SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICE AND CARE INDEX TECHNICAL SPECIFICATIONS 106 Pagina 106 fig. 18 F0M0141m SIDE WINDOW BAGS - HEAD PROTECTION fig.
WARNING Do not cover the backrest of front and rear seats with trims or covers that are not suitable to be used with side bags. WARNING If the key is turned to MAR, even if the engine is switched off, airbags may be deployed when the car is stationary and hit by another vehicle. For this reason, children must never occupy the front seat, even if the car is not moving.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 091-108 PUNTO POP 1ed EN 108 16-08-2011 14:11 WARNING Always drive with your hands on the steering wheel rim so that the airbag can inflate freely if needed. Do not drive with your body bent forward. Keep your back straight against the backrest.
S TA R T I N G A N D D R I V I N G STARTING THE ENGINE ................................................. 110 CONTROLS AND DEVICES Pagina 109 CAR INACTIVITY ............................................................... 120 STARTING AND DRIVING SNOW CHAINS .................................................................. 119 WARNING LIGHTS AND MESSAGES SNOW TYRES ...................................................................... 119 IN AN EMERGENCY SAVING FUEL .................................
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 109-120 PUNTO POP 1ed EN 110 16-08-2011 11:35 STARTING THE ENGINE The car is fitted with an electronic engine lock device: if the engine fails to start, see the paragraph on “The Fiat CODE system” in the “Dashboard and controls” section. Pagina 110 When the engine is switched off, never leave the key in the ignition switch to prevent draining the battery.
❒ put the gear lever into neutral; ❒ turn the ignition key to MAR: the warning lights m and Y on the instrument panel will turn on; ❒ wait for the warning lights Y and m to turn off. The hotter the engine is, the quicker this will happen; ❒ press the clutch pedal all the way down without touching the accelerator; ❒ turn the ignition key to AVV as soon as the warning light m turns off. Waiting too long will waste the work done by the heater plugs. Release the key as soon as the engine starts.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 109-120 PUNTO POP 1ed EN 112 16-08-2011 11:35 WARMING UP THE ENGINE AFTER IT HAS JUST STARTED (petrol and diesel versions) Proceed as follows: ❒ drive off slowly at medium revs, and accelerate smoothly; ❒ do not demand maximum performance for the first few kilometres. Wait until the engine coolant gauge starts moving.
❒ hold button A down and lower the lever. The x warning light on the instrument panel will go out. ❒ engage a gear (first gear if the vehicle is parked uphill or reverse if it is facing downhill) and leave the wheels turned. If the car is parked on a steep slope, it is also advisable to block the wheels with a wedge or stone. Do not leave the key in the ignition switch as this drains the battery. Always remove the key when you leave the car. WARNING Never leave children unattended in the car.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 109-120 PUNTO POP 1ed EN 114 16-08-2011 11:35 Pagina 114 USING THE MANUAL GEARBOX WARNING Depress the clutch pedal fully to change gear correctly. There should be no obstacles on the floor underneath the pedals; make sure that mats are always flat and do not interfere with the pedals.
GENERAL CONSIDERATIONS Electrical devices Car maintenance Have checks and adjustments carried out in accordance with the “Scheduled Service Plan”. Tyres Check the tyre pressure at least once every 4 weeks: if the pressure is too low, consumption levels increase as resistance to rolling is higher. Unnecessary loads Do not travel with an overloaded boot. The weight of the car (especially when driving in town) and its arrangement greatly affect fuel consumption and stability.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 109-120 PUNTO POP 1ed EN 116 16-08-2011 11:35 Top speed Fuel consumption considerably increases as speed increases. Keep your speed as even as possible, avoiding unnecessary braking and acceleration, which cause excessive fuel consumption and increased emissions.
WARNING Never modify the braking system of the car to control the trailer brake. The trailer braking system must be fully independent from the hydraulic system of the car. For any version the towing device used must be right for the towable weight of the car on which it is to be installed.
109-120 PUNTO POP 1ed EN 16-08-2011 11:35 Pagina 118 CONTROLS AND DEVICES Assembly diagram fig. 3 The tow hook structure must be fastened at the points marked by Ø using a total of 6 M10 screws. Laden Existing hole Existing screw WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY The internal back plates should be at least 6 mm thick.
For the type, pressures and specifications of the snow tyre to be used, follow carefully the instructions given in the “Wheels” paragraph of the “Technical specifications” section. The performance of these tyres is considerably reduced when the tread depth is less than 4 mm. If this is the case, replace them. Due to their specific features, the performance of snow tyres is much lower than that of standard tyres in normal conditions or on long motorway stretches.
16-08-2011 11:35 CAR INACTIVITY If the car is to be left inactive for longer than a month, the following precautions should be observed: ❒ park the car in covered, dry and, if possible, well-ventilated premises; ❒ engage a gear; ❒ check that the handbrake is engaged; ❒ disconnect the clip for the negative battery terminal and check battery charge. Repeat this check once every three months during storage.
128 LOW BRAKE FLUID LEVEL .............................................. 122 FIAT CODE CAR PROTECTION SYSTEM FAULT .... 129 HANDBRAKE ON .............................................................. 122 EXTERIOR LIGHTS FAULT .............................................. 129 AIRBAG FAULT ................................................................... 123 REAR FOG LAMPS .............................................................. 129 OVERHEATED ENGINE COOLANT ............................
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 121-132 PUNTO POP 1ed EN 122 16-08-2011 11:40 WARNING LIGHTS AND MESSAGES Pagina 122 x LOW BRAKE FLUID LEVEL (red) HANDBRAKE ON (red) GENERAL WARNINGS Warning lights are accompanied by a specific message and/or sound when applicable.
A specific message is displayed on certain versions. WARNING A problem with the warning light ¬ (light off) is indicated by the warning light “, which indicates the front passenger airbag is deactivated, flashing for more than the usual four seconds. The warning light turns on when the engine is overheated. If the warning light comes on, proceed as follows: ❒ when driving normally: stop the car, switch off the engine and check that the water level in the reservoir is not below the MIN mark.
16-08-2011 11:40 v LOW ENGINE OIL PRESSURE (red) EXHAUSTED ENGINE OIL (only Multijet versions with DPF - red) When the ignition key is turned to MAR (ON), the warning light switches on and should go out as soon as the engine is started. IMPORTANT On particularly demanding journeys, it is advisable to keep the engine on and slightly accelerated for a few minutes before switching it off. A specific message is displayed on certain versions.
the v warning light turns on and flashes along with the message on the display (if applied) when the system detects that the engine oil is exhausted. The flashing of the warning light should not be considered as a fault, rather simply informs the driver that oil needs to be changed after a standard period of car utilisation. If the oil is not changed, when reaching a second deterioration threshold, also the warning light U switches on in the instrument panel and the engine operation is limited at 3000 rpm.
U 16-08-2011 11:40 INJECTION SYSTEM FAULT (Multijet versions - amber) EOBD SYSTEM FAULT (petrol versions - amber) STARTING AND DRIVING If the warning light stays on or comes on when travelling, it means there is a fault in the injection system which could cause loss of performance, poor handling and high fuel consumption levels. A specific message is displayed on certain versions.
WARNING Warning light “ indicates a failure of warning light ¬. This condition is indicated by intermittent blinking of warning light “ for longer than 4 seconds. In this case, warning light ¬may not be indicating that there is a fault in the restraint systems. Before driving off, contact a Fiat Dealership to have the system checked immediately. The warning light comes on when the system is either not working properly or not available.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 121-132 PUNTO POP 1ed EN 128 m 16-08-2011 11:40 GLOW PLUG HEATING (Multijet versions - amber) GLOW PLUG HEATING FAULT (Multijet versions - amber) Glow plug heating The warning light comes on when the key is turned to MAR. It goes out as soon as the glow plugs have reached the preset temperature. Start the engine as soon as the warning light goes out.
– sidelights – brake lights – rear fog lights – direction indicators – number plate lights – daytime running lights (DRL) (for versions/markets, where provided) The failure relating to these lights could be: one or more blown bulbs, a blown protection fuse or a break in the electrical connection. Engine oil pressure sensor fault The warning light turns on when a failure is detected in the engine oil pressure sensor. Go to a Fiat Dealership to have the fault fixed as soon as possible.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 121-132 PUNTO POP 1ed EN 130 16-08-2011 11:40 DPF (Particulate Filter) h CLEANING IN PROGRESS (only Multijet versions with DPF - amber) When the ignition key is moved to MAR position, the warnintg light turns on but should go off after a few seconds.
The light comes on when the sidelights or dipped beams are turned on. The word “CITY” appears on the display when the “Dualdrive” electric power steering system is activated by pressing the relevant control button. Press the button again to make the “CITY” disappear. Follow Me Home The light comes on when this device is active (see “Follow Me Home” in the “Dashboard and controls” section). The display will show a specific message.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 121-132 PUNTO POP 1ed EN 132 16-08-2011 11:40 POSSIBLE ICE ON ROAD (versions with multifunction display) This starts flashing when the outside temperature reaches or falls below 3 °C to warn the driver of the possible presence of ice on the road.
134 CHANGING A TYRE ......................................................... 135 QUICK TYRE REPAIR KIT FIX&GO AUTOMATIC ... 140 CHANGING A BULB ......................................................... 145 CHANGING AN EXTERIOR BULB ................................ 147 CHANGING AN INTERIOR BULB ................................ 152 CHANGING A FUSE .......................................................... 153 RECHARGING THE BATTERY ....................................... 161 RAISING THE CAR ..
SAFETY CONTROLS AND DEVICES 133-164 PUNTO POP 1ed EN 30-09-2011 10:20 Pagina 134 STARTING THE ENGINE IMPORTANT Do not directly connect the negative terminals of the two batteries: sparks could ignite explosive gas released from the battery. If the auxiliary battery is installed on another car, prevent accidental contact between metallic parts of the two cars. EMERGENCY START-UP If the instrument panel warning light Y stays on permanently, contact a Fiat Dealership immediately.
IMPORTANT Remember that the brake booster and the power steering system are not active until the engine is started, so you will need to apply much more force to the brake pedal or steering wheel. Wheel changing and correct use of the jack and spare wheel call for some precautions, as listed below. WARNING Use your hazard lights, warning triangle, etc to show that your car is stationary.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 133-164 PUNTO POP 1ed EN 136 30-09-2011 10:20 WARNING The jack may be used to replace wheels only on the car which it equips or other cars of the same model. Never use the jack for other purposes, such as lifting other models. Never use the jack to carry out repairs under the car. Incorrect positioning of the jack may cause the car to fall.
30-09-2011 10:20 Pagina 137 ❒ warn anybody nearby that the car is about to be lifted. They must stay clear and not touch the car until it is back on the ground; ❒ fit the handle L-fig. 4 to operate the jack and lift the car until the wheel is several centimetres off the ground; WARNING LIGHTS AND MESSAGES ❒ operate device F-fig. 4 to extend the jack until the top of the jack G-fig. 4 fits correctly into jacking point H-fig. 4; F0M0191m IN AN EMERGENCY fig.
133-164 PUNTO POP 1ed EN 30-09-2011 10:20 Pagina 138 CONTROLS AND DEVICES REFITTING A STANDARD WHEEL INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY Following the procedure described previously, raise the car and remove the spare wheel. 138 fig. 5 F0M0192m ❒ for versions with hub caps, remove the cap after unscrewing the 3 fastening bolts and finally unscrew the fourth bolt L-fig.
Proceed as follows: ❒ make sure the contact surfaces between standard wheel and hub are clean so that the fastening bolts will not come loose; ❒ place the wheel onto the hub and tighten the bolts using the wrench provided; ❒ stow the spare wheel in the space provided in the boot; ❒ fit the standard wheel by inserting the first bolt two threads into the hole closest to the inflation valve; ❒ fit the hub cap by aligning the crescent hole with the bolt you have fitted, then insert the other 3 bolts; ❒ usin
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 133-164 PUNTO POP 1ed EN 140 30-09-2011 10:20 Pagina 140 QUICK TYRE REPAIR KIT FIX&GO automatic The Fix&Go automatic quick tyre repair kit is located in the boot. The kit fig. 7 includes: ❒ a cylinder A , containing sealant, which is fitted with: – filling tube B; – an adhesive label C with the message “max.
The sealant fluid has an expiry date. WARNING Do not operate the compressor for longer than 20 minutes at a time. Risk of overheating. The quick repair kit is not suitable for definitive repairs, so the tyres repaired may be used only temporarily. CONTROLS AND DEVICES SAFETY The sealing fluid of the quick tyre repair kit is effective with external temperatures of between −20 °C and +50 °C.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 133-164 PUNTO POP 1ed EN 142 30-09-2011 10:20 WARNING The cylinder contains ethylene glycol. It contains latex, which may cause an allergic reaction. Harmful if swallowed. Irritates the eyes. There could be a reaction in case of inhalation or contact. Avoid contact with your eyes, skin and clothes.
fig. 11 F0M0203m ❒ make sure that switch D-fig. 10 of the compressor is in position 0 (off), start the engine, plug into the nearest socket E-fig. 11 and activate the compressor by turning switch D-fig. 10 to position I (on). Inflate the tyre to the pressure specified in the “Inflation pressure” paragraph in the “Technical specifications” section. ❒ if after 5 minutes you cannot reach at least 1.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 133-164 PUNTO POP 1ed EN 144 30-09-2011 10:20 Pagina 144 ❒ if you get a pressure reading of at least 1.8 bar, restore the proper pressure (with engine running and handbrake on) and restart; ❒ drive with the utmost care to the nearest Fiat Dealership. fig. 13 WARNING Remember to inform the workshop that the tyre has been treated with a quick repair kit.
CONTROLS AND DEVICES SAFETY ❒ When a light is not working, check that the corresponding fuse is intact before changing the bulb. For the location of fuses, refer to the “Changing a fuse” paragraph in this section; STARTING AND DRIVING GENERAL INSTRUCTIONS WARNING Modifications or repairs to the electrical system (ECUs) that are not carried out properly or do not take the system’s technical specifications into account can cause malfunctions leading to the risk of fire.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 133-164 PUNTO POP 1ed EN 146 30-09-2011 10:20 Pagina 146 Bulbs Figure ref.
Pagina 147 CONTROLS AND DEVICES CHANGING AN EXTERIOR BULB fig. 16 F0M0630m fig. 17 F0M0631m The bulbs are arranged inside the light cluster as follows: SIDELIGHTS fig. 17 A sidelights ❒ remove the rubber cap by pulling the flap; B daytime running lights C direction indicators D main beam/dipped beam headlights. IMPORTANT You can replace the front direction indicator, main beam and dipped beam headlight bulbs through the access flap (see “Direction indicators” in this section).
30-09-2011 10:20 Pagina 148 INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 133-164 PUNTO POP 1ed EN 148 fig. 18 F0M0632m fig. 19/a F0M0633m fig. 19/b F0M0634m DAYTIME RUNNING LIGHTS (DRL) MAIN/DIPPED BEAM HEADLIGHTS fig. 19 DIRECTION INDICATORS To change the bulb, proceed as follows: To change the bulb, proceed as follows: Front fig. 20 ❒ turn the bulb holder A-fig.
30-09-2011 10:20 Pagina 149 ❒ refit the bulb holder cover C-fig. 21 by turning it clockwise and locking it properly; ❒ close the lid B-fig. 20 then tighten the catch A. fig. 23 F0M0637m ❒ refit the bulb holder C into the lens by turning it clockwise; fig. 24 F0M0638m ❒ refit the unit making sure the internal catch B clicks into place. FRONT FOG LIGHTS (for versions/markets where provided) Side fig.
30-09-2011 CONTROLS AND DEVICES 133-164 PUNTO POP 1ed EN 10:20 Pagina 150 IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY A fig. 25 F0M0639m ❒ remove the bulb A-fig. 25 by rotating it counter-clockwise and disconnect the electrical connector. REAR LIGHT CLUSTERS The rear light clusters contain taillight, brake light and direction indicator bulbs. The bulbs are arranged inside the light cluster fig.
30-09-2011 10:20 Pagina 151 THIRD BRAKE LIGHT fig. 29 Contact a Fiat Dealership to have bulbs for the rear fog lights A replaced. To change the bulb proceed as follows: ❒ open the boot; ❒ remove the rubber caps; ❒ press in the catches and remove the lens unit C; ❒ disconnect the electric connector; ❒ press in the tabs D and remove the bulb holder; ❒ remove the snap-fitted bulb and replace it. REVERSE LIGHTS fig. 28 Contact a Fiat Dealership to have bulbs for the reverse lights B replaced.
TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 133-164 PUNTO POP 1ed EN 30-09-2011 10:20 Pagina 152 CHANGING AN INTERIOR BULB For the type of bulb and relevant power rating, see “Changing a bulb”. FRONT CEILING LIGHT (for versions/markets, where provided) Proceed as follows to replace the bulbs: fig. 30 F0M0214m fig. 32 F0M0213m fig. 31 F0M0235m fig.
CHANGING A FUSE WARNING If a general protection fuse (MEGA-FUSE, MIDI-FUSE, MAXI-FUSE) is activated, contact a Fiat Dealership. GENERAL INFORMATION Never replace a damaged fuse with metal wires or other recycled material. WARNING Remove the key from the ignition and switch off or disconnect all devices before replacing a fuse. C fuse with damaged filament fig. 34. WARNING If the same fuse blows again, contact a Fiat Dealership.
30-09-2011 10:20 The fuses are grouped in three control units: on the dashboard, in the engine compartment and in the left-hand side of the boot. INDEX 7 6 5 4 3 2 1 14 13 12 11 10 9 8 Dashboard fusebox fig. 36 To access the dashboard fusebox, loosen the screws A-fig. 35 and remove the cover. fig.
133-164 PUNTO POP 1ed EN 30-09-2011 10:20 Pagina 155 CONTROLS AND DEVICES Engine compartment fusebox fig. 38 F0M0417m SERVICE AND CARE fig. 38 TECHNICAL SPECIFICATIONS F0M0416m INDEX fig. 37 IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY To access the fusebox located next to the battery, remove the protective cover fig. 37.
30-09-2011 10:20 Pagina 156 Boot fusebox fig. 40 To access the fusebox located in the left side of the boot, open the appropriate flap (as shown in fig. 39). INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 133-164 PUNTO POP 1ed EN 156 fig. 40 fig.
Pagina 157 AMPS Right dipped beam headlight 1 (*) 7,5 Left dipped beam headlight 8 (*) 7,5 Headlamp alignment corrector 8 5 INT/A supply for switch coils on engine fusebox and switch coils on body computer control unit 13 5 2 (*) 5 Supply and battery for EOBD diagnostic plug, alarm, sound system, Blue&Me control unit 5 10 INT supply for instrument panel, switch on brake pedal (N.O.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 133-164 PUNTO POP 1ed EN 158 30-09-2011 10:20 Pagina 158 Engine compartment fusebox fig.
30 15 Methane system management solenoid valves 84 7,5 Socket (ready for use) 85 – Passenger compartment socket, cigarette lighter 86 15 Battery charge status sensor 87 5 De-mister on driver-side wing mirror, de-mister on passenger-side wing mirror 88 7,5 SAFETY Left fog light, right fog light STARTING AND DRIVING AMPS WARNING LIGHTS AND MESSAGES FUSE IN AN EMERGENCY DEVICES CONTROLS AND DEVICES Pagina 159 SERVICE AND CARE 10:20 TECHNICAL SPECIFICATIONS 30-09-2011 INDEX 133-1
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 133-164 PUNTO POP 1ed EN 160 30-09-2011 10:20 Pagina 160 Boot fusebox fig.
CONTROLS AND DEVICES SAFETY STARTING AND DRIVING We recommend recharging the battery slowly for approximately 24 hours at low amperage. Rapid charging with high currents could damage the battery. To charge the battery, proceed as follows: disconnect the negative terminal B-fig.
30-09-2011 10:20 ❒ press the button A-fig.
RAISING THE CAR TOWING THE CAR If the car needs to be lifted, go to a Fiat Dealership which is equipped with the arm hoist or workshop lift. The tow ring provided with the car is housed in the tool box under the carpet in the boot. The car should be lifted side-on only, by putting the ends of the arms or the workshop lifting device in the areas shown in the diagram. FASTENING THE TOW RING fig.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 133-164 PUNTO POP 1ed EN 164 30-09-2011 10:20 WARNING Do not start the engine while the car is being towed. WARNING Clean the threaded housing carefully before fastening the ring. Make sure that the ring is securely fastened before towing the car.
167 REGULAR CHECKS ............................................................ 171 DEMANDING USE OF THE CAR ................................... 171 CHECKING LEVELS ............................................................ 172 AIR FILTER ............................................................................ 177 POLLEN FILTER ................................................................... 177 BATTERY ...............................................................................
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 165-184 PUNTO POP 1ed EN 166 30-09-2011 10:21 SCHEDULED SERVICING Correct maintenance is essential for ensuring long car life under the best conditions.
60 90 120 150 180 Check tyre condition/wear and adjust pressure if required Check operation of lighting system (headlamps, direction indicators, hazard warning lights, boot, passenger compartment, glove box, instrument panel warning lights, etc.) Check operation of windscreen washer system and adjust nozzles if necessary.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 165-184 PUNTO POP 1ed EN 168 30-09-2011 10:21 Pagina 168 Thousands of kilometres Check engine management system operation (via diagnostic socket) 30 60 90 120 150 180 ● ● ● ● ● ● ● ● Replace accessory drive belt/s ● Replace toothed timing belt (*) ● ● Replace spark plugs (petrol versions) ● ● ● Replace fuel filter (diesel versions)
105 140 175 Check tyre condition/wear and adjust pressure if required ● ● ● ● ● Check operation of lighting system (headlamps, direction indicators, hazard warning lights, boot, passenger compartment, glove box, instrument panel warning lights, etc.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 165-184 PUNTO POP 1ed EN 170 30-09-2011 10:21 Pagina 170 Thousands of kilometres 35 Replace fuel filter Replace air filter cartridge 70 105 ● ● ● 140 175 ● ● ● ● Change engine oil and replace oil filter (*) Change brake fluid (or every 24 months) Change pollen filter (or every 15 months) ● ● ● ● ● ● ● (*) The engine oil and the filter mus
❒ windscreen washer level; ❒ tyre pressure and conditions. ❒ operation of lights (headlights, direction indicators, hazard lights, etc.); ❒ operation of the windscreen wiper/ washer system, position and wear of the windscreen and rear window wiper blades; Every 3,000 km, check and top up, if required, the engine oil level.
13-10-2011 14:27 Pagina 172 CHECKING LEVELS WARNING Never smoke while working in the engine compartment: inflammable gases and vapours may be present, constituting a fire risk. When topping up, take care not to confuse the various types of fluids: they are not interchangeable and could seriously damage the car. fig. 1 - 1.2 (Euro 4) and 1.4 8V versions F0M0649m fig. 1a - 1.2 (Euro 5) versions F0M0650m 1. Engine coolant 2. Battery 3. Windscreen washer fluid 4. Brake fluid 5.
165-184 PUNTO POP 1ed EN 30-09-2011 10:21 Pagina 173 CONTROLS AND DEVICES 1. Engine oil 2. Engine coolant 3. Windscreen washer fluid SAFETY 4. Brake fluid 5. Battery F0M0651m fig. 2a - 1.3 Multijet version (Euro 5) F0M0652m IN AN EMERGENCY fig. 2 - 1.3 Multijet version (Euro 4) WARNING LIGHTS AND MESSAGES STARTING AND DRIVING 6. Diesel filter 1. Engine coolant 2. Battery SERVICE AND CARE 3. Windscreen washer fluid 4. Brake fluid 5. Engine oil INDEX TECHNICAL SPECIFICATIONS 6.
165-184 PUNTO POP 1ed EN 30-09-2011 10:21 Pagina 174 CONTROLS AND DEVICES ENGINE OIL CONSUMPTION The maximum engine oil consumption is usually 400 grams every 1,000 km. INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY During the initial period of usage for the vehicle, the engine is bedding in therefore the engine oil consumption may settle down only after the first 5,000-6,000 km. 174 fig. 3 – 1.2 and 1.
WARNING Be very careful working in the engine compartment when the engine is hot: you may get burned. Remember that the fan may start up if the engine is hot: this could injure you. Make sure that scarves, ties and other loose fitting garments do not get caught up in moving parts. If the level is low, slowly pour a mixture of 50% demineralised water and 50% PARAFLUUP (made by PETRONAS LUBRICANTS) through the filler neck A until the level reaches MAX.
30-09-2011 10:21 CONTROLS AND DEVICES 165-184 PUNTO POP 1ed EN WARNING Some commercial additives for windscreen washing are flammable. The engine compartment contains hot parts which could cause a fire if they come into contact with these additives. SAFETY STARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCY SERVICE AND CARE INDEX TECHNICAL SPECIFICATIONS 176 Pagina 176 fig. 6 F0M0154m WINDSCREEN/REAR WINDOW WASHER FLUID fig. 6 To top up, remove the cap A.
POLLEN FILTER CHECKING THE CHARGE AND THE ELECTROLYTE LEVEL Have the pollen filter replaced by a Fiat Dealership. Inspection operations must be carried out only by specialised personnel, following the prescriptions contained in this Owner Handbook. Any top-up operations must be carried out only by specialised personnel at a Fiat Dealership. WARNING The battery fluid is poisonous and corrosive. Avoid contact with the skin and eyes.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 165-184 PUNTO POP 1ed EN 178 30-09-2011 10:21 Incorrect assembly of electric and electronic devices may cause severe damage to your car. Go to a Fiat Dealership if you want to install accessories (antitheft device, mobile phone, etc.): they will suggest the most suitable devices and advise you if a higher-capacity battery needs to be installed.
Incorrect pressure causes abnormal tyre wear fig. 8: IMPORTANT NOTES A normal pressure: tread evenly worn. B low pressure: tread particularly worn at the edges. C high pressure: tread particularly worn in the centre. The tyres must be replaced when the tread is less than 1.6 mm thick. In all cases, follow the laws in force in the country where you are driving. F0M0160m ❒ Where possible, avoid braking suddenly, wheel-spinning and crashing into curbs, potholes or other obstacles.
30-09-2011 10:21 WARNING If the pressure is too low, the tyre will overheat and could be seriously damaged. INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 165-184 PUNTO POP 1ed EN 180 WARNING Avoid switching the tyres from the right side of the vehicle to the left side and vice versa.
30-09-2011 10:21 Pagina 181 F0M0163m Replacing the windscreen wiper blades fig. 9 Changing the rear window wiper blade fig. 10 SPRAY NOZZLES How to remove the blade: Proceed as follows: Windscreen washer fig. 11 ❒ raise the windscreen wiper arm A; ❒ raise the cover A and remove the arm from the car by slackening the nut B that fastens it to the pivot pin; If the jet is not coming out, firstly check that there is fluid in the reservoir (see “Checking levels” in this section).
30-09-2011 10:21 CONTROLS AND DEVICES 165-184 PUNTO POP 1ed EN Pagina 182 BODYWORK ❒ spraying protective plastic materials in the most exposed areas: underdoor, inner mudguard parts, edges, etc.; PROTECTION FROM ATMOSPHERIC AGENTS ❒ using “open” boxed sections to prevent condensation and pockets of moisture from triggering rust inside.
❒ wash the body using a low-pressure jet of water; IMPORTANT Bird droppings should be washed off immediately and thoroughly as the acid they contain is particularly aggressive. ❒ use a sponge to wipe a slightly soapy solution over the bodywork, frequently rinsing the sponge; ❒ rinse with plenty of water and dry with a jet of air or a chamois leather. Take particular care when drying the less visible parts, such as the door, bonnet and headlight frames, where water can stagnate more easily.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 165-184 PUNTO POP 1ed EN 184 30-09-2011 10:21 INTERIOR Check regularly that water is not trapped under the mats (due to drops from shoes, umbrellas, etc.), as this could cause the sheet metal to rust. WARNING Never use flammable products, such as petroleum ether or modified petrol, to clean the inside the car.
188 ENGINE .................................................................................. 189 FUEL SUPPLY ........................................................................ 190 TRANSMISSION .................................................................. 190 BRAKES .................................................................................. 191 SUSPENSIONS ...................................................................... 191 STEERING SYSTEM .................................
3-10-2011 11:50 Pagina 186 IDENTIFICATION DATA H Maximum weight on rear axle. I We recommend taking note of the identification codes. The following identification codes are printed and shown on the plates: M Number for spare parts. N Correct smoke opacity index (for diesel engines). ❒ Vehicle identification number (VIN) plate. ❒ Chassis marking. ❒ Bodywork paint identification plate. fig. 1 F0M0368m VIN PLATE fig.
3-10-2011 11:50 Pagina 187 ENGINE MARKING A Paint manufacturer. B Colour name. C Fiat colour code. D Colour code for touch-ups or respraying. It is printed on the passenger compartment floor, near or under the front passenger seat. ❒ car model (ZFA 199000); ❒ chassis number. WARNING LIGHTS AND MESSAGES CHASSIS MARKING fig.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 185-208 PUNTO POP 1ed EN 188 3-10-2011 11:50 Pagina 188 ENGINE CODES – BODYWORK VERSIONS Version Engine type code Engine type body version code 3 doors / 5 seats 5 doors / 5 seats 1.2 (Euro 4) 199A4000 199AXA1A 00H 199BXA1A 01E 1.2 (Euro 5) 169A4000 199AXZ1A 50G 199BXZ1A 51G 1.2 (Euro 5 - Start&Stop) 169A4000 199AXZ1A 50C 199BXZ1A 51C 1.
1.3 Multijet 75HP 1.3 Multijet 85HP 199A4000 169A4000 350A1000 199A7000 (●) 199A9000(▲) 199A2000 (■) 199B4000 Otto Otto Otto Diesel Diesel 4 in line 4 in line 4 in line 4 in line 4 in line 70.8 × 78.86 70.8 x 78.86 72 × 84 69.6 × 82 69.6 x 82 1242 1242 1368 1248 1248 11.1:1 11.1:1 11.1:1 16.8:1(▲) 17.6:1 (■) 16.8:1 kW HP rpm 48 65 5500 51 69 5500 57 / 55 (●) 77 / 75 (●) 6000 55 75 4000 62 85 3500 Nm kgm rpm 102 10.4 3000 102 10.4 3000 115 11.7 3250 190 19.
3-10-2011 11:50 Pagina 190 FUEL SUPPLY Fuel supply STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 185-208 PUNTO POP 1ed EN 1.2 - 1.4 1.3 Multijet Multipoint electronic injection “Common Rail” Multijet direct injection IN AN EMERGENCY WARNING LIGHTS AND MESSAGES WARNING Modifications or repairs to the fuel supply system that are not carried out properly or do not take the system’s technical specifications into account can cause malfunctions leading to the risk of fire.
Pagina 191 CONTROLS AND DEVICES BRAKES 1.2 - 1.4 - 1.3 Multijet Service brakes: – front disc (self-ventilating for versions/markets, where provided) – rear drum Parking brake controlled by hand lever, acting on rear brakes 1.4 - 1.3 Multijet Independent wheel McPherson-type with anti-roll bar Independent wheel McPherson-type Front Rear torsion beam with interconnected wheels STEERING SYSTEM 1.2 - 1.4 - 1.
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 185-208 PUNTO POP 1ed EN 192 3-10-2011 11:50 Pagina 192 WHEELS Maximum speed index Q = up to 160 km/h. RIMS AND TYRES R = up to 170 km/h. Pressed steel or alloy rims. Tubeless radial carcass tyres. All approved tyres are listed in the Log Book. S = up to 180 km/h.
81 = 462 kg Example: 6J × 15 ET43 71 = 345 kg 82 = 475 kg 6 = rim width in inches 1. 72 = 355 kg 83 = 487 kg J 73 = 365 kg 84 = 500 kg = rim drop centre outline (side projection where the tyre bead rests) 2. 74 = 375 kg 85 = 515 kg 15 75 = 387 kg 86 = 530 kg 76 = 400 kg 87 = 545 kg = rim nominal diameter in inches (corresponds to diameter of the tyre to be fitted) 3 = Ø.
Version 3-10-2011 11:50 Pagina 194 Rims (*) Tyres provided snow Spare wheel (ç) Rim (*) Tyre 1.2 - 1.4 1.3 Multijet 75HP 6J X 15'' - ET 43 6J X 15'' - ET 43 (▲) 175/65 R15 84T 185/65 R15 88T 175/65 R15 84T (M+S) 185/65 R15 88T (M+S) 1.3 Multijet 85HP 6J X 15'' - ET 43 (▲) 185/65 R15 88T 185/65 R15 88T (M+S) 1.
Pagina 195 1.4 1.3 Multijet 75HP 1.3 Multijet 85HP 155 156 165 165 172 STARTING AND DRIVING 1.2 (Euro 5) - 1.2 ECO WARNING LIGHTS AND MESSAGES 1.2 (Euro 4) IN AN EMERGENCY Maximum speeds after initial car use, in km/h.
185-208 PUNTO POP 1ed EN 3-10-2011 11:50 Pagina 196 CONTROLS AND DEVICES DIMENSIONS SAFETY Dimensions are expressed in mm and refer to the vehicle fitted with its original tyres. Height is measured with the vehicle unladen. STARTING AND DRIVING Boot capacity Capacity with vehicle unladen (VDA standards): ........................ 275 dm3 IN AN EMERGENCY WARNING LIGHTS AND MESSAGES Capacity with rear seat and backrest folded over: .................
Pagina 197 3 doors 5 seats 5 doors 5 seats Unladen weight (with all fluids, fuel tank filled to 90% and without optional equipment): 1015 1030 1025 1040 Payload (*) including the driver: 560 560 560 560 Maximum permitted loads (**) – front axle: – rear axle: – total: 850 850 1575 850 850 1590 850 850 1585 850 850 1600 900/500(●) 400 900/500(●) 400 1000 400 1000 400 Maximum load on roof: 50 50 50 50 Maximum load on the ball joint (braked trailer): 60 60 60 60 Towable loads: –
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 185-208 PUNTO POP 1ed EN 198 3-10-2011 11:50 Pagina 198 1.3 Multijet 75HP 1.
1.3 Multijet 85HP Recommended fuels and original lubricants Unleaded petrol with no less than 95 R.O.N. (EN228 Specification) Fuel tank: including a reserve of: litres litres 45 5÷7 45 5÷7 – – – – Fuel tank: including a reserve of: litres litres – – – – 45 5÷7 45 5÷7 Engine cooling system: litres 5.3 5.3 7.4 (Euro 4) 6.7 (Euro 5) 6.7 Engine sump: Engine sump and filter: litres litres 2.4 2.6 2.4 2.6 – – – – Engine sump: Engine sump and filter: litres litres – – – – 3.0 3.2 3.
3-10-2011 11:50 Pagina 200 FLUIDS AND LUBRICANTS SPECIFICATIONS AND RECOMMENDED PRODUCTS Quality specifications of fluids and lubricants for correct car operation Original fluids and lubricants Replacement interval Lubricants for petrol engines SAE 5W-40 ACEA C3 grade synthetic base lubricant. FIAT 9.55535-S2 certification. SELENIA K P.E. Contractual Technical Reference N° F603.C07 As per the Scheduled Servicing Plan Lubricants for diesel engines SAE 5W-30 grade synthetic base lubricant. FIAT 9.
Mechanical gearbox and differential (petrol and 1.3 Multijet 75HP versions) SAE 75W grade synthetic base lubricant. FIAT 9.55550-MZ6 certification TUTELA TRANSMISSION GEARFORCE Contractual Technical Reference N° F702.G07 Mechanical gearbox and differential (1.3 Multijet 85HP versions) Molybdenum disulphide grease, for use at high temperatures. FIAT 9.55580 certification. NL.GI. 1-2 consistency TUTELA ALL STAR Contractual Technical Reference N° F702.
WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 185-208 PUNTO POP 1ed EN 3-10-2011 11:50 Pagina 202 FUEL CONSUMPTION The fuel consumption figures given in the table below are determined on the basis of the homologation tests set down by specific European Directives.
1.2 (Euro 4) 135 1.2 (Euro 5) 126 1.2 (Euro 5 - Start&Stop) 123 1.2 (ECO) 119 1.4 (Euro 4) 139 1.4 (Euro 5) 132 1.3 Multijet 75HP (Euro 4) 119 1.3 Multijet 75HP (Euro 5) 112 1.3 Multijet 75HP (Euro 5 - Start&Stop) 108 1.3 Multijet 85HP (Euro 5) 90 SAFETY CO2 Emissions according to the current European directive (g/km) STARTING AND DRIVING Versions WARNING LIGHTS AND MESSAGES The CO2 emission figures in the table below refer to combined fuel consumption.
3-10-2011 11:50 Pagina 204 ARRANGEMENTS FOR DEALING WITH THE VEHICLE AT THE END OF ITS LIFE Fiat has been committed for many years to safeguarding the environment through the constant improvement of its production processes and manufacturing products that are increasingly “eco-compatible”.
185-208 PUNTO POP 1ed EN 3-10-2011 11:50 Pagina 205 ® In the heart of your engine. ® Always ask your mechanic for Pagine_ITA.
185-208 PUNTO POP 1ed EN 3-10-2011 11:50 Pagina 206 Oil change? The experts recommend Selenia The engine of your car is factory filled with Selenia. This is an engine oil range which satisfies the most advanced international specifications. Its superior technical characteristics allow Selenia to guarantee the highest performance and protection of your engine.
185-208 PUNTO POP 1ed EN 3-10-2011 11:50 Pagina 207 NOTES
185-208 PUNTO POP 1ed EN 3-10-2011 11:50 Pagina 208
– Heavy use of the vehicle ........ 171 – Planned maintenance programme .......................167-149 – Regular checks.......................... 171 – Scheduled servicing ................ 166 Battery – battery recharging .................. 161 – inspecting the charge ............. 177 – jump starting ............................ 134 – replacement ............................. 177 Body – maintenance ............................. 182 – version codes .......................... 188 Brake fluid level .........
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 209-214 PUNTO POP 1ed EN 210 3-10-2011 11:53 Emergency rear door locking device ............................................ 62 Engine .............................................. 189 – features ..................................... 189 – identification code .................. 188 – marking ..................................... 187 Engine compartments ...
Paintwork ...................................... 182 Parking lights .................................. 54 Particulate filter ............................. 90 Passenger compartment air vents ........................................ 38 Passenger compartment ventilation .................................... 37 Performance ................................. 195 Pollen filter ..................................... 177 Power steering........................... 54-77 Power window ...............................
INDEX TECHNICAL SPECIFICATIONS SERVICE AND CARE IN AN EMERGENCY WARNING LIGHTS AND MESSAGES STARTING AND DRIVING SAFETY CONTROLS AND DEVICES 209-214 PUNTO POP 1ed EN 212 10-10-2011 10:28 – warming up the engine once started ....................................... 114 Starting up and driving ................. 109 Start&Stop system ......................... 79 Steering lock .................................. 12 Steering system .............................. 191 Steering wheel adjustment .........
209-214 PUNTO POP 1ed EN 3-10-2011 11:53 Pagina 213 RIGHT HAND DRIVE VERSION RIGHT HAND DRIVE VERSION The presence and the position of the instruments and warning lights may vary according to the versions. F0M0426m fig. 1 1. Side adjustable air vents - 2. Side fixed air vents - 3. Right steering column stalk: windscreen, rear window wiper and trip computer controls - 4. Instrument panel - 5. Left steering column stalk: external lights - 6. Dashboard controls - 7. Central adjustable air vents - 8.
209-214 PUNTO POP 1ed EN 3-10-2011 11:53 Pagina 214 INSTRUMENT PANEL A Speedometer (speed indicator) B Fuel level gauge with reserve warning light C Engine coolant temperature gauge and excessive temperature warning light D Rev counter RIGHT HAND DRIVE VERSION E Digital display fig.
COP PUNTO POP GB:PUNTO UM GB 11-10-2011 13:54 Pagina 1 F I A T P U N T O ENGLISH The data contained in this publication is intended merely as a guide. FIAT reserves the right to modify the models and versions described in this booklet at any time for technical and commercial reasons. If you have any further questions please consult your FIAT dealer. Printed in recycled paper without chlorine.