User Manual

SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
73
FAN SPEED ADJUSTMENT
Press button
p to adjust the fan speed.
The 12 selectable speeds are shown by the lighting up
of the bars on the climate control system display:
❒ max fan speed = all bars lit
❒ min fan speed = one bar lit.
The fan can be cut off (all bars off) only if the climate
control compressor has been switched off pressing
button
ò
.
To restore automatic fan speed control, after a manual
adjustment, press button AUTO.
AIR TEMPERATURE ADJUSTMENT KNOBS
Turning knobs (L) or (F) clockwise or counter-
clockwise, respectively highers or lowers the air
temperature on driver’s side (knob L) or passenger’s
side (knob F). The temperatures set are shown on
the display.
Turning knobs clockwise or counter-clockwise until
they reach the extreme selections HI or LO, the
maximum heating or cooling functions are respectively
engaged.
HI function (maximum heating power)
This is turned on setting on the display a temperature
above 32°C and can be activated independently from
the driver’s or passenger’s side or both; this setting
brings the system to the “monozone” mode, the
display will show HI.
This function can be engaged when requiring to heat
the passenger compartment as quickly as possible. All
manual settings are however possible with this
function on.
HI function takes air distribution to
Z and fan speed as
set by the system.
IMPORTANT This function is inadvisable with the
engine cold to prevent admitting air that is not warm
enough to the passenger compartment.
To switch the system off, simply turn the ring of knob
(L) or (F) of the temperature set value below 32°C;
the display shows 32°C.
Pressing the AUTO key the display will show a
temperature of 32°C and returns to an operating
condition with automatic temperature adjustment.