Installation Instructions

Packing List : Model SF-1W LTD II L1
Description
Qty.
1
Wall hanger bracket
Side filler panels, (1) L (1) R
1/4” lead screw anchors
Fasten wall mounting bracket
to concrete or cement block wall
construction by following the
same procedure for wood stud
walls discussed earlier.
Drill holes with a masonry bit
and use lead alloy screw
anchors with 1/4” lag screws
and flat washers.
A3 Faucet Adapter Kit
For top supply connection
faucets. (Optional)
A15 Overflow
Tube Kit
(Optional)
Apply teflon tape to drain
boss threads before
installation.
DETAIL OF FAUCET, SUPPLY LINES
WASTE LINES, AND TRIM ASSEMBLIES
1
2
Carton Includes:
1/4” lag bolts
5/16” flat washers
1
2
1
Stopper
Tail Piece
Illustrated installation manual
Packing List : Models SF-1F P-1 FL-7 FL-1 FLTD II
Description
Qty.
1
Molded laundry tub
Painted steel legs
Tinnerman clip
Carrige bolt
1/4” - 20 Hex nut
Stopper
4
4
4
Tail Piece
Illustrated installation manual
4
1
Packing List : TUFF TUB TO GO
Description
Qty.
1
Painted steel legs
Tinnerman clip
Carrige bolt
1/4” - 20 Hex nut
Stopper
4
4
4
1
Screw bag (for legs)
1
1
Illustrated installation manual
4
1
A-1 Faucet
P-Trap
Water Supply Lines
2
1
Packing tray (RMS999)
1
PRINTED IN USA Form No. 02P-1 Rev. 1/02.
R
R
A CRANE PLUMBING COMPANY
1or 2
Molded laundry tub
Molded laundry tub
OPTIONAL EQUIPMENT
A-1 Faucet
Water Supply
Laundry Tub
Tail Piece Washer
P-Trap
1
2
3
4
5
TUFF TUB TO GO
A l l h a r d w a r e
need ed for the
complete laundry
tub installation.
3or 4
3or 4
3or 4
1or 2
1or 2
Installer must
provide teflon
tape.
Rough-in water
s u p p li es a n d
waste line must
be provided at
the installation
area.
1
A6 Laundry Tub
Cover. (Optional)
TAIL PIECE / STOPPER
ASSEMBLY
Typical Tail Piece / Stopper
Assembly
Installation is the same for double
or single basin laundry tubs.
Apply teflon tape to
threads before supply
connection.
1
Stopper
2
3
4
5
Washer
1or 2
Washer
1or 2
Washer
1or 2
3
1 Laundry Tub
2 Tail Piece Washer
3 Tail Piece
IMPORTANT NOTICE: The Gaskets / Washers supplied with the drain assembly should provide adequate water
seal. If additional protection is desired, use ONLY Teflon Tape. Use of Plumbers Putty may adversely affect the
structural integrity of the Drain Assembly and will void the warranty.