Manual

195
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
BOOT LIGHT
To change the bulb, proceed as follows:
❒ open the tailgate;
❒ remove the bulb A-fig. 52 levering in
the points shown by the arrow.
❒ open the protection B-fig. 53 and re-
place the snap-fitted bulb;
❒ re-close the protective cover B on the
lens;
fig. 52
F0C0221m
fig. 53
F0C0097m
fig. 54
F0C0206m
❒ refit the light unit A-fig. 52 inserting
it in its correct position firstly on one
end and then on the other until it clicks
into place.
PUDDLE / DOOR LIGHTS fig. 54
To change the bulb, proceed as follows:
❒ open the door and remove the trans-
parent cover A levering in the point
shown by the arrow;
❒ open the protection B and replace the
snap-fitted bulb;
❒ re-close the protective cover B on the
transparent cover A.