User's Manual

26
ADVANCED PARAMETERS
23. Double click option - set the brightness level to MAX
Available settings: 0 - double click disabled
1 - double click enabled
Default setting: 1 Parameter size: 1 [byte]
24. Command frames sent in 2nd and 3rd association groups (S1
associations)
Parameter determines, which actions will not result in sending frames
to association groups.
Available settings: 0 - all actions send to association groups
1 - do not send when switching ON (single click)
2 - do not send when switching OFF (single click)
4 - do not send when changing dimming level
(holding and releasing)
8 - do not send on double click
16 - send 0xFF value on double click
Default setting: 0 Parameter size: 1 [byte]
25. Command frames sent in 4th and 5th association groups (S2
associations)
Parameter determines, which actions will not result in sending frames
to association groups.
Available settings: 0 - all actions send to association groups
1 - do not send when switching ON (single click)
2 - do not send when switching OFF (single click)
4 - do not send when changing dimming level
(holding and releasing)
8 - do not send on double click
16 - send 0xFF value on double click
Default setting: 0 Parameter size: 1 [byte]
26. The function of 3-way switch
Switch no. 2 controls the Dimmer 2 additionally (in 3-way switch mode).
Function disabled for parameter 20 set to 2 (roller blind switch).
Available settings: 0 - 3-way switch function for S2 disabled
1 - 3-way switch function for S2 enabled
Default setting: 0 Parameter size: 1 [byte]
27. Associations in Z-Wave network security mode
This parameter denes how commands are sent in specied asso-
ciation groups: as secure or non-secure. Parameter is active only in
Z-Wave network security mode. It does not apply to 1st Lifeline group.
NOTE
Parameter 25 values
may be combined,
e.g. 1+2=3 means
that associations on
switching ON or OFF
the Dimmer 2 (single
click) will not be sent.
i
NOTE
Parameter 24 values
may be combined,
e.g. 1+2=3 means
that associations on
switching ON or OFF
the Dimmer 2 (single
click) will not be sent.
i