User Manual

18
ASSOCIATIONS
3. LED diode - visual indicator settings
Visual indication of gestures detection.
Available settings: 0 - gestures detection is not indicated
1 - gestures detection is indicated
Default setting: 0 Parameter size: 1 [bytes]
4. Buzzer - signalling result of gesture recognition
Acoustic signalling of gesture recognition result (using the built-in
buzzer).
Available settings: 1 - only successful recognition is signalled
2 - only failed recognition is signalled
3 - successful and failed recognition is signalled
Default setting: 3 Parameter size: 1 [byte]
5. Powering mode - interval of updating the current mode
This parameter determines how often the device checks if the USB
power supply is connected and updates powering mode if needed.
Available settings: 0 - powering mode is not updated
1-1080 (in minutes) - time interval
Default setting: 4 (4 minutes) Parameter size: 2 [bytes]
6. Power saving mode (battery mode)
This parameter determines operation of gesture detection when bat-
tery powered.
When Standby Mode is selected, hold gesture must be performed to
exit power saving mode and reactivate normal gesture recognition.
The device in Standby Mode consumes the least battery life.
When Simple Mode mode is selected, gesture recognition is always
active, but only slowly performed gestures will be recognized proper-
ly (high battery consumption).
Available settings: 0 - Standby Mode
1 - Simple Mode
2 - the Swipe does not enter power saving
mode
Default setting: 0 Parameter size: 1 [byte]
7. Hold gesture to enter the menu
This parameter allows to choose if the menu can be entered using the
Hold gesture.
Available settings: 0 - Hold gesture to enter the menu enabled
1 - Hold gesture to enter the menu disabled
Default setting: 0 (enabled) Parameter size: 1 [byte]
NOTE
Parameter 4 is rele-
vant only if parameter
2 is set to 1.
i
CAUTION
After disabling the
Hold gesture in param-
eter 7, menu can be
entered by using the
B-button only!
!