User's Manual

BASIC ACTIVATION

#2: Basic activation

1. Open the cover.

2. Remove the battery blocker.

3. Close the cover.

4. Add the device (see “Adding/removing the device” on page 6).

5. Install the device (see “Physical installation” on page 9).

NOTE

The antenna should

be placed above the

battery. Never cut,

shorten or bend the

antenna. Its length is

suited to the band at

which the system op-

erates.

NOTE

Metal surfaces in close

vicinity (e.g. metal

switch boxes, metal

door trims) may im-

pair the reception ca-

pability.