User's Manual

7
OPERATING THE DEVICE
#4: Operating the device
Waking up the device:
The Button needs to be woken up to receive information about the
new conguration from the controller, like parameters and associa-
tions.
Click the Button 4 times to wake it up.
Operating the Button:
1 click:
2 clicks:
3 clicks:
4 clicks:
5 clicks:
6 or more
clicks:
Hold:
Release:
send action to associated devices (switch on/o by de-
fault) and/or trigger a scene
send action to associated devices (switch on maximum
level by default) and/or trigger a scene
send action to associated devices (no action by default)
and/or trigger a scene
wake the device up and/or trigger a scene
start reset procedure (press and hold for 5s to conrm)
and/or trigger a scene
learning mode (adding/removing)
send action to associated devices (start level change up/
down) and/or trigger a scene
send action to associated devices (stop level change)
and/or trigger a scene
Scene ID:
Every action with the
Button is send to the main
controller with Scene ID
equal to 1. Controller recog-
nizes type of action using the
attribute assigned to it.
Reset procedure of the Button:
Reset procedure allows to restore the device back to its factory set-
tings, which means all information about the Z-Wave controller and
user conguration will be deleted. In order to reset the device:
1. Click the Button exactly ve times.
2. Press and hold the Button for at least 5 seconds.
Action Attribute
1 click Key Pressed 1 time
2 clicks Key Pressed 2 times
3 clicks Key Pressed 3 times
4 clicks Key Pressed 4 times
5 clicks Key Pressed 5 times
Hold Key Held Down
Release Key Released