Installation Manual

Sensus Installation Manual

150-00006 Rev 5

Equipment Placement

WARNING:

Avoid personal injury and damage to this equipment. An unstable mounting surface may cause this

equipment to fall.

To protect against equipment damage or injury to personnel, comply with the following:

• Install this equipment in a restricted access location.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other

equipment (including amplifiers) that produce heat.

• Place this equipment close enough to a mains AC outlet to accommodate the length of this

equipment's power cord.

• Route all power cords so that people cannot walk on, place objects on, or lean objects

against them. This may pinch or damage the power cords. Pay particular attention to

power cords at plugs, outlets, and the points where the power cords exit this equipment.

• Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold

with this equipment.

• Make sure the mounting surface or rack is stable and can support the size and weight of

this equipment.

• The mounting surface or rack should be appropriately anchored. Ensure this equipment is

securely fastened to the mounting surface or rack where necessary to protect against

damage due to any disturbance and subsequent fall.

Ventilation

This equipment has openings for ventilation to protect it from overheating. To ensure

equipment reliability and safe operation, do not block or cover any of the ventilation openings. Install

the equipment in accordance with the manufacturer's instructions.

Rack Mounting Safety Precautions

Mechanical Loading

• Make sure that the rack is placed on a stable surface. If the rack has stabilizing devices,

install these stabilizing devices before mounting any equipment in the rack.

WARNING:

Avoid personal injury and damage to this equipment. Mounting this equipment in the rack should be

such that a hazardous condition is not caused due to uneven mechanical loading.