Installation Manual

© Copyright 2018, Fiber Mountain, Inc. All Rights Reserved
35
Sensus Installation Manual
150-00006 Rev 5
5.8 Password Recovery Procedure
In the event of a lost or forgotten password, the API accounts can be reset to their default
through the following process:
1. Configuration will be done via Linux CLI craft (RS232) port on the Sensus Management
Module or via SSH connection
2. Attach serial cable from the front panel craft (RJ-45) port or Ethernet SSH connection
3. Login with login username (default: SysAdmin) and password (default: Password1), then run
the following commands:
>sudo rm /fimo_connect/http_user.htpasswd
>sudo reboot
4. The API login credentials should now be set back to default (username: LocalAdmin;
password: Password1). The user configurations can then be changed as desired.