Installation Manual

Sensus Installation Manual

150-00006 Rev 5

1. Safety Instructions

Standards

Icon

Meaning

Explanation

Note

Indicates important features or instructions.

Caution

Indicates that you may risk losing data or damaging your hardware.

Warning

Alerts you to the risk of personal injury.

Laser Warning

Laser output may be hazardous if viewed with magnifying optics.

Protect yourself from electric shock and your system from damage!

• This product complies with international safety and design standards. Observe all safety

procedures that appear throughout this guide and the safety symbols that are affixed to this

product.

• If circumstances impair the safe operation of this product, stop operation and secure this

product against further operation.

Avoid personal injury and product damage! Do not proceed beyond any symbol until you fully

understand the indicated conditions!

Power

WARNING:

Redundant Power – The unit is provided with redundant power system. Disconnect all supplies before

servicing!

• Important! This is a Class I product. You must earth this product. This equipment may

have up to two power supply cords. To reduce the risk of electric shock, two power supply

cords may have to be disconnected before servicing.

• This product plugs into a socket-outlet. The socket-outlet must be near this product, and

must be easily accessible.

• Connect this product only to the power source that is indicated on the rear panel of this

product.

• If this product does not have a mains power switch, the power cord serves this purpose.