Installation Manual

Sensus Installation Manual

150-00006 Rev 5

Laser

WARNING:

Laser Warnings: Laser output may be hazardous if viewed with magnifying optics.

Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare

into beams or view directly with optical instruments.

Class I (21 CFR 1040.10 and 1040.11) and Class 1M (IEC 60825-1 2001-01) laser products.

Statement 291

Cables

• Always disconnect all power cables before servicing this product.

• Always pull on the plug or the connector to disconnect a cable. Never pull on the cable

itself.

• Do not walk on or place stress on cables or plugs.

Factory Service

• Refer service only to service personnel who are authorized by the manufacturer.

Read and Retain Instructions

• Carefully read all safety and operating instructions before operating this equipment, and

retain them for future reference.

Follow Instructions and Heed Warnings

• Follow all operating and use instructions. Pay attention to all warnings and cautions in the

operating instructions, as well as those that are affixed to this equipment.

Terminology

The terms defined below are used in this document. The definitions given are based on those

found in safety standards.

Service Personnel - The term “service personnel” applies to trained and qualified individuals

who are allowed to install, replace, or service electrical equipment. The service personnel are expected

to use their experience and technical skills to avoid possible injury to themselves and others due to

hazards that exist in service and restricted access areas.