User's Manual

Remote Fiber Node (RFN) User Manual

8.3. Alarm Monitor and Control Software

8.3.1. PC Requirements

8.3.2. Launch Program

8.3.3. Firmware Revision

8.3.4. General Settings

8.3.5. Username / Password

8.3.6. Default and Status Settings

8.3.7. Block Diagram

8.3.8. Controls

8.3.9. Alarm Settings

8.3.10. Software Windows

( In ascending order insert windows of all the settings in use)

Downlink

Uplink

8.3.11. Alarms and Controls

 FOTX temp, power

 PA: FPM, VSWR

8.4. Connector Type

RF connections are made using DIN-female connectors.

Optical connectors are SC/APC type for downlink / uplink signal paths, and LC connectors

for Ethernet paths.

8.5. Mechanical

All Plug-ins are secured each with 10 tamper resistant pin-in-Hex socket cap screws size 8-32 x

¾ inches in length.

Bottom access panel-door is secured with twenty-one and side panel-doors each require 8

tamper resistant pin-in-Hex socket cap screws size 8-32, ½ inches in length, totaling 37.

8.6. Switches & Indicators

TBD.