User's Manual

Remote Fiber Node (RFN) User Manual

11. Startup Checklist

Confirm all necessary parts accompanied product before beginning installation or operation.

11.1. Equipment List

Remote Fiber Node (RFN) fully populated*

 FS42R-AP-3  FS42R-700-5

 FS42R-iDEN-2  FS42R-CELL-2

 FS42R-AWS-5  FS42R-PCS-5

*Does not include WiMAX Plug-in.

11.2. On Site Requirements

On site will require a 3 wire (Hot, Neutral, and Ground) 120 VAC input to the RFN including a

separate earth ground bus bar that connects to the RFN chassis.

Two 9/125 um single-mode fiber strands with SC/APC connectors, one for the downlink path

and the other for the uplink path. Two 9/125 um single-mode fiber strands with LC connectors

for the Ethernet connections.

Three high quality RF cables with DIN-Male connectors that attached from the individual DAS

antennas to the Left, Center, and Right RFN interface ports.