User's Manual

Remote Fiber Node (RFN) User Manual

Figure 14 Side Access Panel

After inserting the 4 fibers through aperture, route two, (DL and UL) fibers inside all the way

to the optical stack. See Figure 15 Optical Stack.

View is from underneath the RFN bottom access

panel. The DL and UL fiber strands are distinguish

by their connector type which is SC/APC type, see

Figure 16.

The inner fiber adapter (away) is the uplink path

connection and the outer fiber adapter (near) is the

downlink path connection.

Incoming Ethernet fibers 3, 4 connect to the media

converter commonly called EtherDevice Switch

(EDS) see Figure 18. This Figure to the left also

shows the 3 Access Points connections that come

from the WiFi Plug-in.

Fiber strands for the Ethernet interface are noticeable by the dual LC connectors see Figure 17.

Here shown paired TX / RX that mate to the SFP module.

Figure 15 Optical Stack

Near

Away

Figure 17

Figure 16

Left Ant 1

Center Ant 2

ht Ant 3

Fibers & Power In