User's Manual

Remote Fiber Node (RFN) User Manual
©Copyright 2011, Fiber-Span Page 35 of 38
19. FCC Required Statement
Manufacturers Notes
“Changesormodificationsnotexpresslyapprovedbythemanufacturercould“Void”the
user’sauthoritytooperatetheequipment”.
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassAdigital
device,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovide
reasonableprotectionagainstharmfulinterferencewhentheequipmentisoperatedina
commercialenvironment.Thisequipmentgenerates,uses,andcanradiateradio
frequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions
manual,maycauseharmfulinterferencetoradiocommunications.Operationofthis
equipmentinaresidentialareaislikelytocauseharmfulinterferenceinwhichcasethe
userwillberequiredtocorrecttheinterferenceattheirownexpense.
Thisdevicehasbeendesignatedtooperatewiththeantennashavingamaximumgainof
[9]dBifora1meterdistanceandantennashavingagaingreaterthan[15]dBiarestrictly
prohibitedforusewiththisdevice.Therequiredantennaimpedanceis[50]Ohms.
To improve and correct equipment performance the following can be performed.
1. Re-orient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a different circuit from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/TV technician for help.