User's Manual
Home Gateway
ON: WLAN is enabled.
OFF:WLAN is disabled.
SR120-A
1
SR120-A
12W
SR120-A
Power adapter Network cable User Manual
188*115*173mm 100mm
The figures in this manual are only for reference. If there is any discrepancy between
the manual and the final product, the final product shall prevail.
To operate the equipment safely and correctly, users should read the
following precautions carefully before operating the equipment, and
Services
direct sunlight to protect the equipment and its components from overheating, which
can result in damage.
work normally and can be extremely hazardous due to shorting.
high places or hang it on the wall, please make sure the equipment is firmly secured.
Falling down from high places would damage the equipment and its accessories, and
warranty will be void.
cause equipment damage or operation failures.
requirement. Power socket overload, broken cables or broken plugs may cause electric
shock or fire. Regular check-ups on power supply wires and cables are essential. If any
appears damaged, replace it at once.
connected to the equipment such as power cable, network cable and telephone line to
avoid equipment damages caused by lightning stroke.
unplug the power cable.
shut off the power supply and unplug the power cable.
observe strictly during operations.
Avoid moisture, dampness and water damage. Equipment exposed to water cannot
Do not lay this equipment on an unsteady base. If you want to place the equipment at
Do not lay a heavy object on the equipment, and avoid violent collision.
Use the power supply adapter provided in the package only. Using other adapters may
The electrical load capacity of the socket and cables should meet the equipment’s
Power off the equipment in the event of lightning storms. Disconnect all cables
If the equipment is not used for a long period, please shut off the power supply and
Do not wash the equipment with water. Before cleaning the equipment case, please
Do not touch the wires and cables with a wet hand.
Do not use benzene o ethyl alcohol, or gasoline to clean the equipment.
Install the equipment in a well ventilated environment without high temperatures or
The warranty is void if the product is opened, misused, damaged or modified in any way
Contact you dealer without delay , if
the power cable or the power plug appears damaged;
the product has been exposed to rain or moisture;
the product has fallen from high places;
you fail to use the product normally in strict accordance with the user manual supplied.
Ethernet interface
Blinking:The Internet interface is
connected with data transmission.
Blinking:The WLAN interface is
connected with data transmission.