Installation Guide

RAIL INSTALLATION (CONTINUED)
Step 9: Attach post baseplate cover.
Aer the top and bottom rails and / or stairs have been
installed, position both halves of the baseplate cover on either
side of the post above the baseplate and below the bottom
rail. Align the locking pins on one half to the matching holes on
the other half and slide together. Optional: Apply PVC adhesive
to the locking pins prior to sliding halves together for a secure
fit (Figure 12).
Figure 12
Baseplate Cover
Page 3 of 3fiberondecking.com
Creation Date: 06/23