Installation Guide

ManualsBrandsFiberon ManualsDeck StairsArmorGuard Post Sleeve Metal Surface Mount Kit

THANK YOU

We appreciate the trust and condence you have placed in Fiberon through the purchase of this post sleeve surface mount kit. We strive to

continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home

improvement needs. Thank you for choosing Fiberon!

INSTALLATION MANUAL

ARMORGUARD

POST SLEEVE SURFACE MOUNT KIT

Questions, problems, missing parts? Before returning to the store,

call Fiberon Customer Service

8 a.m. - 5 p.m., EST, Monday - Friday

1-800-230-7547

FIBERONDECKING.COM

Model # BKT POST SLV MT F

Summary of content (9 pages)

PAGE 1
Model # BKT POST SLV MT F INSTALLATION MANUAL ARMORGUARD® POST SLEEVE SURFACE MOUNT KIT Questions, problems, missing parts? Before returning to the store, call Fiberon Customer Service 8 a.m. - 5 p.m., EST, Monday - Friday 1-800-230-7547 FIBERONDECKING.COM THANK YOU We appreciate the trust and confidence you have placed in Fiberon through the purchase of this post sleeve surface mount kit. We strive to continually create quality products designed to enhance your home.
PAGE 2
Table of Contents Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Wood Surface Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Concrete Surface Installation. . . .
PAGE 3
Warranty (continued) In addition, this Limited Warranty does not cover and the manufacturer shall not be liable for any installation, removal or reinstallation costs.
PAGE 4
Pre-Installation (continued) PACKAGE CONTENTS A B C D E F G H Part Description Quantity A Post mount 1 B 5/16-18 in. x 6 in. Bolt 4 C 1/4 in. x 3 in. Concrete bolt 4 D Fender washer 8 E 5/16 in. Small washer 4 F 5/16 in. Hex nut 4 G #10 x 1 in.
PAGE 5
Wood Surface Installation 1 Marking the mounting location □□ Use the base of the post mount (A) as a template and mark the four corner holes on the deck surface. If necessary, mark inside the square of the post mount (A) on the deck surface to create a drainage hole. 2 Drilling the holes □□ Drill four 3/8 in. holes at the marked locations, drilling through the deck board and the reinforcement boards. If necessary, drill a 3/8 in.
PAGE 6
Wood Surface Installation (continued) 4 5 Securing the post □□ Use a bubble level to check for plumb and level of the post. If adjustment is required, loosen the nuts to allow for insertion of the leveling wedges (I) between the bottom of the post and the top of the deck. Place the plastic wedge (I) under the post on any side where the post is leaning. Installing the rail stabilizers □□ Slide one plastic rail stabilizer (H) onto the post mount (A).
PAGE 7
Concrete Surface Installation 1 Marking the mounting location □□ Use the base of the post mount (A) as a template and mark the four corner holes for the wedge-bolt anchors (C). A 2 Drilling the holes NOTE: Aged concrete could be more porous and more likely to break, causing difficulty with securing the anchor bolts. If this occurs, it is recommended to drill holes 1 in.
PAGE 8
Concrete Surface Installation (continued) 4 5 Securing the post □□ Use a bubble level to check for plumb and level of the post. If adjustment is required, place the leveling wedge (I) under the post on any side where the post is leaning. Adding a post sleeve □□ Slide one plastic rail stabilizer (H) onto the post mount (A). The slotted opening can be positioned in any direction. □□ Determine the height of the bottom rail. The bottom rail mounting screws will screw into the rail stabilizer (H).
PAGE 9
Questions, problems, missing parts? Before returning to the store, call Fiberon Customer Service 8 a.m. - 5 p.m., EST, Monday - Friday 1-800-230-7547 FIBERONDECKING.COM Retain this manual for future use.