Installation Guide

6
Pre-Installation (continued)
□ Transfer the measurement to the top rail, making sure that the distance from the end of the rail to the rst baluster slot is equal on
both ends of the rail. The minimum distance from a post to rst baluster slot is 1-1/2 in. for clearance from the brackets.
(See Fig. 3)
1-1/2 in.
Fig. 3
□ Place the rails together so that the top and bottom baluster slots are aligned. Mark the bottom rail for the inside distance between
the posts (see Fig. 4). Cut the top and bottom rails to t tightly between the posts.
Fig. 4
Bottom
Top