Installation Guide

Line Rail Installation (continued)

Preparing the top rail

□ Place top rail brackets (AA) over each end of the top rail.

Inserting balusters

□ Insert a baluster into the rst and last baluster holes in the

bottom rail.

NOTE: Baluster length may vary slightly. Make sure all

balusters are cut to the correct length.

Positioning the top rail

□ Carefully position the top rail between the posts and lower

onto the two balusters. Ensure you fully seat the balusters

into the top rail.

□ Check the top rail and ensure it is level.

Marking and drilling top rail holes

□ Lightly trace a line to show the location of the top rail

bracket (AA).

□ Remove the top rail and mark the location of the bracket

ange. Then pre-drill holes with a 1/8 in. drill bit and

attach the top bracket ange (CC) using the #10 x 1.5 in.

screws(DD).