Installation Guide

9 FIBERONDECKING.COM
Please contact 1-800-230-7547 for further assistance.
Line Rail Installation (continued)
10
Installing the balusters and top rail
□ Install all balusters into the bottom rail.
□ Seat the balusters into the top rail and press down on the
brackets to snap/lock the top rail into place.
□ Pre-drill two holes in the ange at the bottom of the
bracket (AA) 2-1/2 in. deep with a 1/8 in. bit.
□ Secure the top rail using two #10 x 2.5 in. screws (EE). DO
NOT OVERTIGHTEN THE SCREWS.
EE
AA
11
Installing the post caps
□ Complete the installation by installing the post cap in place.
You can use a quality exterior adhesive in order to do this
but note that you will not be able to remove the cap at a
later time once it is glued.