Installation Guide

5 HOMEDEPOT.COM/VERANDA
Please contact 1-800-230-7547 for further assistance.
Pre-Installation (continued)
PRIOR TO INSTALLING THE RAILING
IMPORTANT: Please read and follow the instructions in this section before you begin installation of your railing products.
NOTE: Rail lengths will vary slightly due to manufacturing processes. Make sure rails and balusters are cut properly to correct length,
and with hole pattern centered between posts before securing.
NOTE: For best results, cut post sleeves with a carbide-tipped balde, minimum 32-tooth.
□ If using post sleeve moulding, slide the post down into the cove moulding prior to securing any railings (Fig. 1).
Fig. 1
□ Measure the inside distance between properly installed, plumb posts. See Fig. 2 for Line and Stair Railings.
Fig. 2 For Line For Stairs