User's Manual

Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved
H380-GL Hardware User Manual Page
6
of
47
1 Foreword
1.1 Introduction
This document describes the electrical characteristics, RF performance, dimension of structure,
application environment and other information of H380-GL (hereinafter referred to as H380) module. With
the help of this document and other related documents, application developers can quickly understand
the hardware functions of H380 module and implement the hardware development of products.
1.2 Reference Standard
The design of this product refers to the following standards:
 3GPP TS 51.010-1 V10.5.0: Mobile Station (MS) conformance specification; Part 1:
Conformance specification
 3GPP TS 34.121-1 V10.8.0: User Equipment (UE) conformance specification; Radio
transmission and reception (FDD);Part 1: Conformance specification

3GPP TS 21.111 V10.0.0: USIM and IC card requirements
 3GPP TS 51.011 V4.15.0: Specification of the Subscriber Identity Module -Mobile Equipment
(SIM-ME) interface

3GPP TS 31.102 V10.11.0: Characteristics of the Universal Subscriber Identity Module (USIM)
application
 3GPP TS 31.11 V10.16.0: Universal Subscriber Identity Module (USIM) Application
Toolkit(USAT)
 3GPP TS 36.124 V10.3.0: ElectroMagnetic Compatibility (EMC) requirements for mobile
terminals and ancillary equipment

3GPP TS 27.007 V10.0.8: AT command set for User Equipment (UE)
 3GPP TS 27.005 V10.0.1: Use of Data Terminal Equipment - Data Circuit terminating Equipment
(DTE - DCE) interface for Short Message Service (SMS) and Cell Broadcast Service (CBS)

PCI Express M.2 Specification Rev0.9-3
1.3 Related Documents
 H380 Module Performance Test Report
 RF Antenna Application Design Specification
 H3-Family Driver & Dial-up Application Design Specification
 H3-Family AT Command Manual