User's Manual

Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.
L816-AM Hardware User Manual Page
42
of
42
5.5 Storage
5.5.1 Storage Life
Storage Conditions (recommended): Temperature is 23 ± 5 ℃, relative humidity is RH 35-70%.
Storage period (sealed vacuum packing): Under the recommended storage conditions, the storage life is
12 months.
5.5.2 Workshop Life
For the module integrated some components for “Class 3” humidity-sensitive ,the workshop life need
24hours. After unpacking and under the environment with the room temperature of 23±5
℃
and the
relative humidity of less than 60%, the reflow production or other high-temperature operations shall be
conducted within 24 hours for products, or products shall be stored in the environment with the relative
humidity of less than 10%, in order to keep products dry.
5.5.3 Recommended baking standards:
 Continuous baking time: 24 hours.

Temperature: 125±5
℃
.

Oven: Heat convection oven.
 Component tray can NOT be baked on high temperature, Need use high temperature tray baking
5.6 Packing
The L816-AM module uses the tray sealed vacuum packing, combined with the outer packing method
using the hard cartoon box, so that the storage, transportation and the usage of modules can be protected
to the greatest extent.
Note:
The vacuum package bag includes the humidity card and a desiccant. The module is the
humidity sensitive device, and the humidity sensitivity level is Class 3, which meets the
requirements of the American Electronic Component Industry Association (JEDEC). Please read
the relevant application guidance and precautions referred to herein, to avoid the permanent
damage to the product caused by humidity.
5.6.1 Tray Package
Please read the L816-AM packing instructions of Fibocom company 《FIBOCOM-SAL-WI-63 L816-AM Packing
Instruction A0》.