User's Manual

Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.
L816-AM Hardware User Manual Page
6
of
42
1 Foreword
1.1 Introduction
The document describes the electrical characteristics, RF performance, dimensions and application
environment, etc. of L816-AM-00 (hereinafter referred to as L816-AM). With the assistance of the
document and other instructions, the developers can quickly understand the hardware functions of
L816-AM modules and develop products.
1.2 Reference Standard
The design of the product complies with the following standards:

3GPP TS 51.010-1 V10.5.0: Mobile Station (MS) conformance specification; Part 1:
Conformance specification

3GPP TS 34.121-1 V10.8.0: User Equipment (UE) conformance specification; Radio
transmission and reception (FDD);Part 1: Conformance specification

3GPP TS 36.521-1 V10.6.0: User Equipment (UE) conformance specification; Radio
transmission and reception; Part 1: Conformance testing

3GPP TS 21.111 V10.0.0: USIM and IC card requirements

3GPP TS 51.011 V4.15.0: Specification of the Subscriber Identity Module -Mobile Equipment
(SIM-ME) interface

3GPP TS 31.102 V10.11.0: Characteristics of the Universal Subscriber Identity Module (USIM)
application

3GPP TS 31.11 V10.16.0: Universal Subscriber Identity Module (USIM) Application
Toolkit(USAT)

3GPP TS 36.124V10.3.0: ElectroMagnetic Compatibility (EMC) requirements for mobile
terminals and ancillary equipment

3GPP TS 27.007 V10.0.8: AT command set for User Equipment (UE)

3GPPTS27.005 V10.0.1: Use of Data Terminal Equipment - Data Circuit terminating Equipment
(DTE - DCE) interface for Short Message Service (SMS) and Cell Broadcast Service (CBS)
1.3 Related Documents

RF Antenna Application Design Specification

FIBOCOM_L8 Family System Driver Integration and Application Guidance

L816-AM AT Commands Manual

L816-AM SMT Application Design Specification