User's Manual
Table Of Contents
- Copyright
- Attention
- Trademark
- Versions
- Foreword
- Product Overview
- Structure
- Hardware Introduction
- Hardware Interface
- Power Interface
- Power on/off and Reset Signal
- Status Indicating Signal
- USB /SSIC Interface
- USIM Interface
- Digital Audio
- Win8/Android Switch Control Interface
- W_DISABLE# Interface
- TX_BLANKING Interface
- WAKEUP_Host Interface
- BODY_SAR Interface
- I2C Interface
- Clock Interface
- Config Interface
- RF Interface
- Other Interfaces
- Electrical and Environmental Features
- RF Interface
L830-EA M.2 Module Hardware User Manual Page
10
of
45
Characteristics
Interface ：M.2
Environment
Operating Temperature：-30℃ ~ +65℃
Storage Temperature：-40℃ ~ +85℃
Performance
Operating Voltage
Voltage：3.135V ~ 4.4V Normal：3.3V
Current
Consumption
(Typical Value)
5mA (Sleep Mode)
LTE FDD DATA：750mA
WCDMA：580mA
2G Talk：300mA (GSM PCL5)
Interface
RF Interface
Antenna ：Mainx1，Diversityx1
Function Interface
1 x USB 2.0，Multiple Profiles over USB，USB SSIC
SIM Support ，I2C Support，I2S/PCM Support
GPIO，Clock
Data Features
Protocol Stack
External TCP/IP and UDP/IP protocol stack
EDGE
Multi-slot class 33 (5 Down; 4 Up; 6 Total)
Coding Scheme MCS1~9
GPRS
Multi-slot class 33 (5 Down; 4 Up; 6 Total)
Coding Scheme MCS1~4
CSD
UMTS(14.4kbps)，GSM(9.6kbps)
USSD
Support
SMS
MO / MT Text and PDU modes
Cell broadcast
Audio
not supported yet
Character Set
IRA，GSM，UCS2，HEX
AT Commands
FIBOCOM proprietary AT commands
GSM 07.05
GSM 07.07