User's Manual

FIBOCOM B830-GL Hardware User Manual_HP Customization Version Page 26 of 29

5.3 M.2 Interface Model

The B830 M.2 module adopts 75-pin gold finger as external interface, where 59 pins are signal pins and

16 pins are notch pins as shown in Figure7-1. For module dimension, please refer to chapter 7.2

Dimension of Structure. Based on the M.2 interface definition, B830 module adopts Type 3042-S3-B-M

interface (30x42mm, the component maximum height on t top layer is 1.5mm, PCB thickness is 0.8mm,

and KEY ID is B-M).

5.4 M.2 Connector

The B830 module connects to AP via M.2 connector, it is recommended to use M.2 connector from

LOTES Corporation with the model APCI0026-P001A as shown in Figure 5-3. The package of connector,

please refer to the specification.