User's Manual

Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.
FIBOCOM B830-GL Hardware User Manual_HP Customization Draft Version Page 25 of 28
5.4
M.2 Connector
The B830 module connects to AP via M.2 connector, it is recommended to use M.2 connector from
LOTES Corporation with the model APCI0026-P001A as shown in Figure 5-3. The package of
connector,
please refer to the specification.
5.3
M.2 Interface Model
The B830 M.2 module adopts 75-pin gold finger as external interface, where 59 pins are signal pins and
16 pins are notch pins as shown in Figure7-1. For module dimension, please refer to chapter 7.2
Dimension of Structure. Based on the M.2 interface definition, B830 module adopts Type 3042-S3-B-M
interface (30x42mm, the component maximum height on t top layer is 1.5mm, PCB thickness is 0.8mm,
and KEY ID is B-M).