Hardware Guide
Table Of Contents
- Fibocom_FM101-CG_Hardware_Guide_V1.0.pdf
- FM101-CG-20: Hardware Guide
- Contents
- Change History
- 1. Foreword
- 2. Product Overview
- 3. Pin Definition
- 4. Electrical Characteristics
- 5. Functional Interface
- 6. Radio Frequency
- 6.1. RF Interface
- 6.2. Operating Bands
- 6.3. Transmitting Power
- 6.4. Receiving Sensitivity
- 6.5. GNSS Receiving Performance
- 6.6. Antenna Design
- 6.7. PCB Routing Design
- 6.8. Main Antenna Design
- 6.9. Diversity and MIMO Antenna Design
- 6.10. GNSS Antenna Design
- 6.11. Other Interfaces
- 7. Thermal Design
- 8. Electrostatic Protection
- 9. Structural Specifications
- Appendix A: Acronyms and Abbreviations
- Module FCC & ISED警语 for Fibocom
2. Product Overview
2.1. Product Introduction
Fibocom FM101-CG module is designed based on Qualcomm SDX12 platform,
supporting Cat 6 network level, and supporting CA network architecture. FM101-CG
integrates Baseband, Memory, PMIC, Transceiver, PA and other core devices, supporting
TDD-LTE. The maximum downlink rate supported in CA mode is 261 Mbps, and the
maximum uplink rate is 30 Mbps. FM101-CG is designed with M.2 package and is
applicable to various scenarios such as CPE, VR/AR, gateway, Internet TV set-top box, and
intelligent monitoring.
2.2. Product Specifications
2.2.1. Radio Frequency Features
Table 1. Operating band
System
FM101-CG
TDD-LTE Band 42/43/48
Table 2. Transmission capacity
System
FM101-CG
LTE
DL peak rate 261 Mbps
UL peak rate 30 Mbps
DL 4 × 2 MIMO
2. Product Overview
Copyright © Fibocom Wireless Inc. 8