Hardware Guide
Table Of Contents
- Fibocom_FM101-CG_Hardware_Guide_V1.0.pdf
- FM101-CG-20: Hardware Guide
- Contents
- Change History
- 1. Foreword
- 2. Product Overview
- 3. Pin Definition
- 4. Electrical Characteristics
- 5. Functional Interface
- 6. Radio Frequency
- 6.1. RF Interface
- 6.2. Operating Bands
- 6.3. Transmitting Power
- 6.4. Receiving Sensitivity
- 6.5. GNSS Receiving Performance
- 6.6. Antenna Design
- 6.7. PCB Routing Design
- 6.8. Main Antenna Design
- 6.9. Diversity and MIMO Antenna Design
- 6.10. GNSS Antenna Design
- 6.11. Other Interfaces
- 7. Thermal Design
- 8. Electrostatic Protection
- 9. Structural Specifications
- Appendix A: Acronyms and Abbreviations
- Module FCC & ISED警语 for Fibocom
Item Description
PCIe interface
PCIe Gen2 x 1Lane, the maximum transmission rate is 5GT/s, and RC
mode is supported
SIM interface
2 groups of SIM card interfaces, supporting dual SIM single standby
Support USIM: 1.8 V and 3 V
I
2
C interface 1 group I
2
C with a maximum speed of 3.4 Mbps
Physical
characteristic
Dimensions: 30 mm × 42 mm × 2.3 mm
Packaging: M.2
Weight: TBD
Temperature
range
Operating temperature: –30°C to 75°C
The module works normally within this temperature range, and the
related performance meets the requirements of 3GPP standards.
Extended temperature: –40°C to 85°C
The module works normally within this temperature range, and the
baseband and RF functions are normal. However, some indicators
may exceed the range of 3GPP standards. When the temperature
returns to the normal working range of the module, all the indicators
of the module meet the requirements of 3GPP standards.
Storage temperature: –40°C to 90°C
The storage temperature range of the module when the module is
powered off.
Software
upgrade
Through USB interface/FOTA
Environmental
standards
RoHS and halogen-free
2. Product Overview
Copyright © Fibocom Wireless Inc. 10