Hardware Guide
Table Of Contents
- Fibocom_FM101-CG_Hardware_Guide_V1.0.pdf
- FM101-CG-20: Hardware Guide
- Contents
- Change History
- 1. Foreword
- 2. Product Overview
- 3. Pin Definition
- 4. Electrical Characteristics
- 5. Functional Interface
- 6. Radio Frequency
- 6.1. RF Interface
- 6.2. Operating Bands
- 6.3. Transmitting Power
- 6.4. Receiving Sensitivity
- 6.5. GNSS Receiving Performance
- 6.6. Antenna Design
- 6.7. PCB Routing Design
- 6.8. Main Antenna Design
- 6.9. Diversity and MIMO Antenna Design
- 6.10. GNSS Antenna Design
- 6.11. Other Interfaces
- 7. Thermal Design
- 8. Electrostatic Protection
- 9. Structural Specifications
- Appendix A: Acronyms and Abbreviations
- Module FCC & ISED警语 for Fibocom
Copyright
Copyright ©2021 Fibocom Wireless Inc. All rights reserved. Without the prior written
permission of the copyright holder, any company or individual is prohibited to excerpt,
copy any part of or the entire document, or transmit the document in any form.
Notice
The document is subject to update from time to time owing to the product version
upgrade or other reasons. Unless otherwise specified, the document only serves as the
user guide. All the statements, information and suggestions contained in the document
do not constitute any explicit or implicit guarantee.
Trademark
The trademark is registered and owned by Fibocom Wireless Inc.
Contact
Website: https://www.fibocom.com/en/
Address: Floor 10, Building A, Shenzhen International Innovation Valley, First Stone Road,
Xili Community, Xili Street, Nanshan District, Shenzhen
Tel: +86 755-26733555