Hardware Guide
Table Of Contents
- Fibocom_FM101-CG_Hardware_Guide_V1.0.pdf
- FM101-CG-20: Hardware Guide
- Contents
- Change History
- 1. Foreword
- 2. Product Overview
- 3. Pin Definition
- 4. Electrical Characteristics
- 5. Functional Interface
- 6. Radio Frequency
- 6.1. RF Interface
- 6.2. Operating Bands
- 6.3. Transmitting Power
- 6.4. Receiving Sensitivity
- 6.5. GNSS Receiving Performance
- 6.6. Antenna Design
- 6.7. PCB Routing Design
- 6.8. Main Antenna Design
- 6.9. Diversity and MIMO Antenna Design
- 6.10. GNSS Antenna Design
- 6.11. Other Interfaces
- 7. Thermal Design
- 8. Electrostatic Protection
- 9. Structural Specifications
- Appendix A: Acronyms and Abbreviations
- Module FCC & ISED警语 for Fibocom
Pin
Number
Pin Name I/O
Reset
Status
Pin Description Type
74 VCC PI * Power input
Power
supply
75 CONFIG_2 DO NC
NC, WWAN-PCIe is configured
for FM101-CG module, USB_SS
interface type M.2 module
- -
Pins marked with * are reserved functions or under development.
Unused pins remain floating.
Table 7. I/O parameter description
Type Description
PI Power input
PO Power output
DI Digital input
DO Digital output
DIO Digital input/output
AI Analog input
AO Analog output
AIO Analog input/output
OD Open drain
3. Pin Definition
Copyright © Fibocom Wireless Inc. 20