Hardware Guide
Table Of Contents
- Fibocom_FM101-CG_Hardware_Guide_V1.0.pdf
- FM101-CG-20: Hardware Guide
- Contents
- Change History
- 1. Foreword
- 2. Product Overview
- 3. Pin Definition
- 4. Electrical Characteristics
- 5. Functional Interface
- 6. Radio Frequency
- 6.1. RF Interface
- 6.2. Operating Bands
- 6.3. Transmitting Power
- 6.4. Receiving Sensitivity
- 6.5. GNSS Receiving Performance
- 6.6. Antenna Design
- 6.7. PCB Routing Design
- 6.8. Main Antenna Design
- 6.9. Diversity and MIMO Antenna Design
- 6.10. GNSS Antenna Design
- 6.11. Other Interfaces
- 7. Thermal Design
- 8. Electrostatic Protection
- 9. Structural Specifications
- Appendix A: Acronyms and Abbreviations
- Module FCC & ISED警语 for Fibocom
5. Functional Interface
5.1. Power Supply
The following table describes the power interface of FM101-CG module.
Table 13. Power interface
Pin Name I/O Pin Number Description
VBAT PI 2,4, 70, 72, 74
Module power supply, 3.135V–4.4V, 3.8V is
recommended
GND G
3, 5, 11, 27, 33, 39,
45, 51, 57, 71, 73
GND, all GND pins must be grounded
Power Input
The FM101-CG module is powered on through the VBAT pin. The following figure
shows the recommended power supply design.
Figure 3. Recommended power supply design
5. Functional Interface
Copyright © Fibocom Wireless Inc. 24