Hardware Guide
Table Of Contents
- Fibocom_FM101-CG_Hardware_Guide_V1.0.pdf
- FM101-CG-20: Hardware Guide
- Contents
- Change History
- 1. Foreword
- 2. Product Overview
- 3. Pin Definition
- 4. Electrical Characteristics
- 5. Functional Interface
- 6. Radio Frequency
- 6.1. RF Interface
- 6.2. Operating Bands
- 6.3. Transmitting Power
- 6.4. Receiving Sensitivity
- 6.5. GNSS Receiving Performance
- 6.6. Antenna Design
- 6.7. PCB Routing Design
- 6.8. Main Antenna Design
- 6.9. Diversity and MIMO Antenna Design
- 6.10. GNSS Antenna Design
- 6.11. Other Interfaces
- 7. Thermal Design
- 8. Electrostatic Protection
- 9. Structural Specifications
- Appendix A: Acronyms and Abbreviations
- Module FCC & ISED警语 for Fibocom
recommended power-off sequence is shown in the following figure.
Figure 7. Recommended power-off sequence
5.2.2. Reset
FM101-CG module can be reset by hardware and software.
Table 16. Reset methods
Reset Method Action
Hardware reset Pull down the RESET_N pin for 0.5s or
more, and then release
Software reset Send the AT+CFUN=15 command
Figure 8. OC drive reset reference circuit
5. Functional Interface
Copyright © Fibocom Wireless Inc. 28